Quote Originally Posted by Trigger5521 View Post
I posted all my settings for 8GB's at 1800 FSB in this thread a few months back...give them a whirl.

This board is tricky. I found if I increased NB for example my previous stable CPU voltage needed to be increased. There is a magic combo for your board cpu and ram combo, but don't get stuck thinking one voltage change is going to cut it.

Is heat an issue?..RAM will spit errors if it gets too hot, tape one of the temp sensors that came in the MB box to the RAM's heat sink. Better yet get a corsair triple channel RAM fan.

This may help as well... Post #11 in this thread http://www.xtremesystems.org/forums/...d.php?t=223177
helped me alot.

Good luck let us know.
That thread is a good find, Trigger. According to that post, It seems my vtt/vdimm ratio was off. I ticked the vtt down a notch and have prime running at 1 hour 10 minutes so far.

Are you running prime with min/max mem at 4096 or for the whole 8 gigs? Right now I have prime set to what was in that post (4096.)