X48 Rampage Formula Preview.

[OLDcomer]

Could you maybe upload your settings what you used with your Q9550 and the bios version?
I tryed to get 4GHz this evening with high voltages but without any succes
I really dont get it im running 3.7 with really low voltages on my MB but 3.9 or 4.0 are just impossible.

Here are the stable settings for my old q9550 c1 and the bios is 0802:

*Extreme Tweaker*
Ai Overclock Tuner [Manual]
CPU Ratio Setting [8.5]
FSB Strap to North Bridge [333Mhz]
FSB Frequency [473]
PCIE Frequency [100]

DRAM Frequency [DDR2-1135MHz]
DRAM Command Rate [2N]
DRAM CMD Skew on Channal A [Auto]
DRAM CMD Skew on Channal B [Auto]
DRAM CLK Skew on Channal A [Auto]
DRAM CLK Skew on Channal B [Auto]

DRAM Timing Control [AUTO]

DRAM Static Read Control [Disabled]
Ai Clock Twister [Stronger]
Ai Transation Booster [Manual]
Common Performance Booster [7]

Pull-In of CHA PH1 [Disabled]
Pull-In of CHA PH2 [Disabled]
Pull-In of CHA PH3 [Disabled]
Pull-In of CHA PH4 [Disabled]
Pull-In of CHA PH5 [Disabled]
Pull-In of CHA PH6 [Disabled]
Pull-In of CHB PH1 [Disabled]
Pull-In of CHB PH2 [Disabled]
Pull-In of CHB PH3 [Disabled]
Pull-In of CHB PH4 [Disabled]
Pull-In of CHB PH5 [Disabled]
Pull-In of CHB PH6 [Disabled]

CPU Voltage [1.375 CPU-Z Load]

CPU PLL Voltage [1.50]
North Bridge Voltage [1.65]

DRAM Voltage [2.00]
FSB Termination Voltage [1.36]
South Bridge Voltage [1.075]
SB 1,5V Voltage [AUTO]
Loadline Calibration [Disabled]
CPU GTL Voltage Reference [Auto]
NB GTL Voltage Reference [0.67x]
DRAM Controller Voltage REF [AUTO]
DRAM Channel A Voltage REF [AUTO]
DRAM Channel B Voltage REF [AUTO]

CPU LED Selection [CPU Voltage]
NB LED Selection [North Bridge Voltage]
SB LED Selection [South Bridge Voltage]
Voltiminder LED [Disabled]

CPU Spread Spectrum [Disabled]
PCIE Spred Spectrum [Disabled]

CPU Clk Skew = Delay 100PS
NB Clk Skew = Normal


*Advanced settings*
CPU Ratio Setting [8.5]
C1E Support [Disabled]
CPU TM Function [Disabled]
Vanderpool Technology [Disabled]
Execute Disable Bit [Disabled]
Max CPUID Value Limit [Disabled]
Intel(R) SpeedStep (TM) Tech. [Disabled]