Quote Originally Posted by Andrea deluxe View Post
i love ud5....


i am stable with:

4ghz cpu at 1.232v under load
1600mhz cl8 ram with 1.63v
3200mhz uncore with 1.28v-qpi

250cicle of linx with 95% of rm used during the test.


impossible with a p6t v2 i have tryed....
Those voltages are really good man..

Although my rig doesn't see all installed memory, I am stable @ 4GHz with 1.264v under load (this is just CPU-z though, I don't know where to take the readings with a multimeter) RAM @ 1528MHz with 1.64v (I haven't really tried lowering VDimm tbh) and 1.355v QPI, I have tried for lower Vcore and QPI, but anything lower than this causes BSOD's after a couple of passes of linX..

Is that a typo in your post?

Surely you don't let LinX run for 250 passes?!?!

20 passes is plenty imo.. I like to check my overclocks by running 20 passes of LinX using all available RAM, then leave Prime95 Blend Test running overnight, and then I let 3d Mark Vantage run around 10 loops, if it is stable after that, then I am happy...