DFI UT X58-T3EH8 continued - Part 2

[Razer(x)]

Ok so, i have no problems with cpu @3.6 and ram @1200mhz (default voltages except for the vcore 1.1v), but i have if i set the cpu to 4ghz, damn

I've tried increasing vcore and vtt but nothing to do

[ci2kla]

Ok so, i have no problems with cpu @3.6 and ram @1200mhz (default voltages except for the vcore 1.1v), but i have if i set the cpu to 4ghz, damn

I've tried increasing vcore and vtt but nothing to do

Just clam down a try the settings step by step and that should work out....

[rioja]

for me with 200x21 and dram 1600 8-8-8-24 board was absulutely stable

so i would suggest for the beginning test
200x19 1600 8-8-8-24 cpu/vtt 1.35 dram 1.65

and after that set multi to 20 or 21 and test again

[Razer(x)]

for me with 200x21 and dram 1600 8-8-8-24 board was absulutely stable

so i would suggest for the beginning test
200x19 1600 8-8-8-24 cpu/vtt 1.35 dram 1.65

and after that set multi to 20 or 21 and test again

The pc is stable @3.8ghz 1.24v vtt and ram @ 1600 mhz CAS 8. I've set the cpu-tweaker latencies in the bios too, so it could not change them.

Now gotta try CAS 7