Just some added info for you non dualie types;
PCI-X has been around a LONG time.
Intent was to get higher speeds than the normal 33-PCI slot so technically it can handle up to 266MB/sec if my memory is correct while the smaller one can handle up to 133mb/sec
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Originally Posted by Frisch
But is it backwards compatitable with 33-PCI ?
Yes..
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
You're correct Dave. PCI-X has been around almost as long as PCI and it is fully backwards compatible
Also, it is the 32 bits PCI-X slot that can handle 266MB/sec since it runs not at 33Mhz but at 66Mhz, but the 64 bits version can handle up to 1GB/sec. It runs at 66Mhz (532 MB/sec) and 133Mhz (1064MB/sec).
Last edited by Martijn; 07-18-2009 at 01:48 AM.
Main rig:
CPU: I7 920C0 @ 3.6Ghz (180*20)
Mobo: DFI UT X58 T3eH8
RAM: 12GB OCZ DDR3-1600 Platinum
GPU/LCD: GeForce GTX280 + GeForce 8600GTS (Quad LCDs)
Intel X25-M G2 80GB, 12TB storage
PSU/Case: Corsair AX850, Silverstone TJ07
Will the Sammy boards work with a 4pin EPS connecter
maybe but I'd get a 4 to 8 adapter. short money..
Corsair has a little 400w PSU thats perfect for these and has all the right cables..
can get it for $40 on sale from newegg every few weeks
http://www.newegg.com/Product/Produc...82E16817139008
Last edited by Movieman; 07-18-2009 at 07:56 PM.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
It does, if you push the 4 pin in the middle of the 8pin connector. Square peg round hole deal but it does work.... Maybe not recommended but seeing as each CPU only pulls <30W anyway...
I've broken all the rules when I put my sammy pair together
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Found this from 2Cpu.com For sale section:
For sale:
(3) Intel SE7520BB2
2x 2.0GHz Sossamans (for each board)
$75.00/ea OBO Shipped
http://forums.2cpu.com/showthread.php?t=94639
Go get your own
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
75 bucks for CPUs AND board? Nice.
Can't view the thread since I'm not a member. Just as well, I don't need to spend more money right now
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Mine's just as bad... Using two adapters: molex -> 4 pin -> 8 pinIt does, if you push the 4 pin in the middle of the 8pin connector. Square peg round hole deal but it does work.... Maybe not recommended but seeing as each CPU only pulls <30W anyway...
I've broken all the rules when I put my sammy pair together
Main rig:
CPU: I7 920C0 @ 3.6Ghz (180*20)
Mobo: DFI UT X58 T3eH8
RAM: 12GB OCZ DDR3-1600 Platinum
GPU/LCD: GeForce GTX280 + GeForce 8600GTS (Quad LCDs)
Intel X25-M G2 80GB, 12TB storage
PSU/Case: Corsair AX850, Silverstone TJ07
Found this from 2Cpu.com For sale section:
For sale:
(3) Intel SE7520BB2
2x 2.0GHz Sossamans (for each board)
$75.00/ea OBO Shipped
http://forums.2cpu.com/showthread.php?t=94639
Go get your own
damn can't see that page. Is this for real? I'll send money.
edit: nvm I just signed up.
http://oemxs.us/shopping/index.php?p...arget=products
FREE SHIPPING ON HEATSINKS!!!!
------------------------------------------------------------------------------------------------------
Crunch with us, the XS WCG team
------------------------------------------------------------------------------------------------------
I'd offer him 100$ for a pair
Gentlemen: http://cgi.ebay.com/Xeon-dual-core-L...110413357455QQ
Here's 10 2GHz sammys for 49$/piece ^^
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
i have couple 2ghz pairs for 85 shipped to con usa
------------------------------------------------------------------------------------------------------
Crunch with us, the XS WCG team
------------------------------------------------------------------------------------------------------
what's the highest ghz chips for the sammy?
1.66 and 2.0Ghz chips are common, 2.13 is rare, 2.33 is close to non-existant. Clock for clock they're comparable to a Q6600.
Main rig:
CPU: I7 920C0 @ 3.6Ghz (180*20)
Mobo: DFI UT X58 T3eH8
RAM: 12GB OCZ DDR3-1600 Platinum
GPU/LCD: GeForce GTX280 + GeForce 8600GTS (Quad LCDs)
Intel X25-M G2 80GB, 12TB storage
PSU/Case: Corsair AX850, Silverstone TJ07
Really? Comparable to a Q6600? The wtf am I doing heating my room up with this P.O.S. Q6600?
You can't overclock sammy.
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Found on ebaY:
Tyan S5365G3NR Tiger i7520SD
http://cgi.ebay.com/ws/eBayISAPI.dll...E:B:EF:US:1123
Last edited by test.it; 07-27-2009 at 09:48 PM.
My q6600 is at stock (OMG *GASP*) atm anyways due to heat. and this msi board being very picky.
(eh I'll be getting it back up to speed when i decide to put my 780i back in)
Still has 400MHz clock advantage even at stock.My q6600 is at stock (OMG *GASP*) atm anyways due to heat. and this msi board being very picky.
(eh I'll be getting it back up to speed when i decide to put my 780i back in)
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Sammy got moved to a new case today, and I must say this old Chieftech Dragon I got brand new from a friend for a few bucks fits like it was made for Sammy. I don't think you can find a smaller, cheaper case for it.. plus it's very lightweight
Uhm yeah, it's pretty tight
Crap foto but it looks really neat, white case with blue LEDs
yep I have the same case (Antec version) and it fits perfect.Sammy got moved to a new case today, and I must say this old Chieftech Dragon I got brand new from a friend for a few bucks fits like it was made for Sammy. I don't think you can find a smaller, cheaper case for it.. plus it's very lightweight
Uhm yeah, it's pretty tight
btw I was walking by sossa2 yesterday and said, "hmm let me check the temps." 25c on 1 cpu and 98c on cpu 2. (WCG 90%) So it's safe to say I freaked out and noticed a power supply cable in the fan.
Rebooted and all it fine. try that on any other cpu.
Reply With Quote
. So here is a set of 
Bookmarks