MMM
Page 46 of 95 FirstFirst ... 364344454647484956 ... LastLast
Results 1,126 to 1,150 of 2367

Thread: Building a Sossaman rig?

  1. #1126
    I am Xtreme
    Join Date
    May 2007
    Location
    Massachusetts
    Posts
    1,285
    Ya where ya been gongo working hard? It's gettin hot here finally on the East Coast- Sammies are the thing to have in this weather because they stay CooL

  2. #1127
    Xtreme Member
    Join Date
    May 2006
    Location
    North Idaho
    Posts
    282
    Quote Originally Posted by karl_eller View Post
    Normally I agree with your reservations about running multiple computers off a single PSU, but in the case of a Sammy, it's probably cheaper and more efficient to run multiple sammies off a single PSU. Most PSUs aren't hitting max efficiency until around 50% load or higher, and at 100 watts a piece, a nice 400-450 watt PSU (eg Corsair VX450 or CX400) could easily handle 2-3 Sammies without breaking a sweat.

    The down side is that, as far as I know, turning one off would turn them all off, and turning one on would turn them all on.

    Eller
    If you ground the green wire from the power supply, it will keep the supply on, regardless of inputs from the MB. Also, I think in the cyberdruid thread mentioned earlier, he states that turning one MB on does not turn the other on, and likewise, shutting one down, does not shut the other off. Grounding the green is a surefire way to keep the supply on if in doubt

  3. #1128
    Xtreme Cruncher
    Join Date
    Sep 2005
    Location
    Bay Area, CA
    Posts
    2,819
    I have a entire 2.0ghz sammys rig for cheap (motherboard, cpus, heatsinks, backplate and ram). pm me if anyone interested.
    ------------------------------------------------------------------------------------------------------

    Crunch with us, the XS WCG team
    ------------------------------------------------------------------------------------------------------

  4. #1129
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Bail_w View Post
    I have a entire 2.0ghz sammys rig for cheap (motherboard, cpus, heatsinks, backplate and ram). pm me if anyone interested.
    Define "cheap"
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  5. #1130
    Xtreme Cruncher
    Join Date
    Sep 2005
    Location
    Bay Area, CA
    Posts
    2,819
    Quote Originally Posted by Movieman View Post
    Define "cheap"
    215 shipped con usa, if too high let me know. i need to pay my credit card bill
    ------------------------------------------------------------------------------------------------------

    Crunch with us, the XS WCG team
    ------------------------------------------------------------------------------------------------------

  6. #1131
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Bail_w View Post
    215 shipped con usa, if too high let me know. i need to pay my credit card bill
    That's reasonable..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  7. #1132
    2.4C killer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    1,924
    I can build a Phenom II X4 940 system for $191 shipped with Biostar 790GX board and RAM. I'm assuming it smokes a Sammy for the cost?

  8. #1133
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Peen View Post
    I can build a Phenom II X4 940 system for $191 shipped with Biostar 790GX board and RAM. I'm assuming it smokes a Sammy for the cost?
    Your including cpu,motherboard,heatsink and memory in that price?
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  9. #1134
    I am Xtreme
    Join Date
    May 2007
    Location
    Massachusetts
    Posts
    1,285
    Quote Originally Posted by Movieman View Post
    Your including cpu,motherboard,heatsink and memory in that price?
    Is He?? Has the Sammy been beaten Electrical and Cost wise??? Never

  10. #1135
    2.4C killer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    1,924
    Quote Originally Posted by Movieman View Post
    Your including cpu,motherboard,heatsink and memory in that price?
    Yep yep

  11. #1136
    Xtreme Cruncher
    Join Date
    Nov 2007
    Location
    Newcastle, Australia
    Posts
    1,317
    Quote Originally Posted by Peen View Post
    I can build a Phenom II X4 940 system for $191 shipped with Biostar 790GX board and RAM. I'm assuming it smokes a Sammy for the cost?
    If clocked decently, it'll do about twice the points per day, but at a little over double the power draw, and be harder to cool, too. Depends on what's more important: Output or power consumption.

    Eller

    Desktop: Q6600 G0 @ 3.6 Ghz | P5E | 2x2 Gb G.Skill PC8000 | GTX 560 Ti | CM690 | TT TP 750 watt | Win 7 Pro x64 | Water Cooling
    Server: i3 530 (Stock) | CM Vortex Low-Profile | Zotac H55-ITX WIFI | 2x2Gb Corsair 1333Mhz | IGP | VX450 | Server 2008 R2 x64

  12. #1137
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Peen View Post
    Yep yep
    Ok, show me links then and here is my cost to build a sammy rig for those parts:
    MB :$30 delivered
    HS: $20.00 for the pair
    cpu's: $80.00/pair
    memory: $40 from newegg for 2 times one gig or cheaper on ebay.. DDR2-400 ECC REG is cheap to buy today.
    Total:$170.00
    Lets add in that the MB your using ain't exactly what I'd call primo vs an Intel server board that should last quite a long time.
    Then electrical cost, what does your combo draw?
    The Sammy is 117w at 100% load..
    That's the point here, sammy is the ideal machine for people who aren't crunchers by nature.
    Those that don't want elec guzzling hot machines..
    It is not for all and I did it as an experiment to see for myself what were the good and bad points..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  13. #1138
    Xtreme Cruncher
    Join Date
    Sep 2005
    Location
    Bay Area, CA
    Posts
    2,819
    Quote Originally Posted by Peen View Post
    I can build a Phenom II X4 940 system for $191 shipped with Biostar 790GX board and RAM. I'm assuming it smokes a Sammy for the cost?
    I assumed you bought it on newegg.com with 20 dollars rebate right?

    http://www.newegg.com/Product/ComboD...t=Combo.209473
    ------------------------------------------------------------------------------------------------------

    Crunch with us, the XS WCG team
    ------------------------------------------------------------------------------------------------------

  14. #1139
    2.4C killer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    1,924
    Interesting, well if its the same price then seems like a no-brainer to me.

  15. #1140
    2.4C killer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    1,924
    Quote Originally Posted by Bail_w View Post
    I assumed you bought it on newegg.com with 20 dollars rebate right?

    http://www.newegg.com/Product/ComboD...t=Combo.209473
    Yes but with Bing cash back and newegg is giving me another 20 or so off because they love my face so much

  16. #1141
    I am Xtreme
    Join Date
    May 2007
    Location
    Massachusetts
    Posts
    1,285
    I guess I admire any machine that can pump out massive amounts of points for research. Sossaman's can within reason-it is the Low heat&electrical output that is attractive thing about em. Hey they are not for all-But if a few of us could get together and sneak 1 into every home in the country No one would ever notice!! Like a 100watt light bulb on all time Big Deal

  17. #1142
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by CaptMorgan View Post
    I guess I admire any machine that can pump out massive amounts of points for research. Sossaman's can within reason-it is the Low heat&electrical output that is attractive thing about em. Hey they are not for all-But if a few of us could get together and sneak 1 into every home in the country No one would ever notice!! Like a 100watt light bulb on all time Big Deal
    and that is exactly my point..
    It is a niche product..
    Not the most powerfull but right up there in dependability and with the boards at $19.00 plus shipping and a pair of cpu's under $100.00 it is the perfect machine for non crunchers to crunch with..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  18. #1143
    2.4C killer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    1,924
    Quote Originally Posted by Movieman View Post
    and that is exactly my point..
    It is a niche product..
    Not the most powerfull but right up there in dependability and with the boards at $19.00 plus shipping and a pair of cpu's under $100.00 it is the perfect machine for non crunchers to crunch with..
    Ok, but where do you get them nowadays?

    BTW, you WCG guys post fast haha

  19. #1144
    Xtreme Cruncher
    Join Date
    Sep 2005
    Location
    Bay Area, CA
    Posts
    2,819
    Not everyone can afford to pay 300 dollars electrical bill every month. Thus, i chose the sammys. Produce about 7-8k per day and help for a cause.
    ------------------------------------------------------------------------------------------------------

    Crunch with us, the XS WCG team
    ------------------------------------------------------------------------------------------------------

  20. #1145
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Bail_w View Post
    Not everyone can afford to pay 300 dollars electrical bill every month. Thus, i chose the sammys
    yup, and good point especially in CAL where they have stepped rates on elec and you can get absolutely killed trying to run a farm of top machines there.
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  21. #1146
    Xtremely High Voltage Sparky's Avatar
    Join Date
    Mar 2006
    Location
    Ohio, USA
    Posts
    16,040
    I like my sammys. And they like being together. I'll have to grab pics but they are running in one box with the Y cables just fine
    The Cardboard Master
    Crunch with us, the XS WCG team
    Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64

  22. #1147
    Xtreme Cruncher
    Join Date
    Sep 2005
    Location
    Bay Area, CA
    Posts
    2,819
    Quote Originally Posted by SparkyJJO View Post
    I like my sammys. And they like being together. I'll have to grab pics but they are running in one box with the Y cables just fine
    what are Y cables?
    ------------------------------------------------------------------------------------------------------

    Crunch with us, the XS WCG team
    ------------------------------------------------------------------------------------------------------

  23. #1148
    2.4C killer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    1,924
    ok ok, plz show me where to build one

    I can't stand this P4 makes more heat then the i7 Xeon and ungodly slow

  24. #1149
    Xtreme Cruncher
    Join Date
    Sep 2005
    Location
    Bay Area, CA
    Posts
    2,819
    Quote Originally Posted by Peen View Post
    ok ok, plz show me where to build one

    I can't stand this P4 makes more heat then the i7 Xeon and ungodly slow

    For the CPUs, you can buy a pair of 2.0ghz sammys from me for 85 shipped con usa. Or you can buy it from ebay for 115.

    Motherboard: http://www.centrix-intl.com/details.asp?productid=4675
    ------------------------------------------------------------------------------------------------------

    Crunch with us, the XS WCG team
    ------------------------------------------------------------------------------------------------------

  25. #1150
    2.4C killer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    1,924
    Awesome, thanks. So I need ECC DDR2 and some heatsinks.

    Still trying to decide between this and PhenomII 940 Oc'ed

Page 46 of 95 FirstFirst ... 364344454647484956 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •