X48 Rampage Formula Preview.

[Alien Grey]

now i knew whats the problem

i tried clear cmos and get post on first time, i enter bios and CHANGE NOTHING , and select save and reboot

then i got no post, the lcd poster shows "EN SETUP", it shows "EN SETUP" when i enter bios and it never shut down even the computer reboot

i tried 0902 bios and 0803 bios, tried putting only 1 stick of ram in 4 different slots, tried plugging only 1 sata hdd

so is my mobo broken?

thanks

Maybe the flash went wrong.

Disconnect and remove everything that you don't need to post your board. Use one stick of RAM.

Remove the power cable from your PSU and remove the battery from the board. Push the Clear CMOS button for 1 minute and leave the board without power for at least a half an hour.

Power up your board and hit F2 to load setup defaults. Restart your computer and enter BIOS Setup. Flash your board and shut it down.

Do a Clear CMOS again after flashing your board and Load Setup Defaults again afterwards.

All you can do now is hope that the problem is gone.