ok, having backups from 5th position and holding back WR were little bit confusingOriginally Posted by mikeguava
ok, having backups from 5th position and holding back WR were little bit confusing
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
ooops forgot to publish this one to take #4ok, having backups from 5th position and holding back WR were little bit confusing
http://www.xtremesystems.org/forums/...38&postcount=1
but hinted a while ago that 38k has fallen in another thread...
http://www.xtremesystems.org/forums/...8&postcount=85
don't try to make any sense of me - I can be a clown sometimes without any sense nor sensibilty...
Was hoping for your guys to beat my 05 - no backups there - but wanna be tempted to bench 05 again!
But I expect HIPro5 with his gem to shatter everything within days from now...I doubt too many peeps will be able to fend off his assault!!!
Last edited by mike; 07-10-2009 at 01:38 AM.
one more screenshot from LHe 3D-tests, imagine the frustration.. ARGH!
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
why didn't you nudge the mouse for that one point more
You guys did one heck of a job there.
Didn't Massman drink too much at the gathering ? It seems he gained some weight :p
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
We got 50017.. but 9 more mouse nudges short of WRwhy didn't you nudge the mouse for that one point more
You guys did one heck of a job there.
Didn't Massman drink too much at the gathering ? It seems he gained some weight :p
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
did you get a chance to run any 8MWe got 50017.. but 9 more mouse nudges short of WR
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
8M? Why would we run that?
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
Hey, everybody has their own thing
...that pic is....HURTone more screenshot from LHe 3D-tests, imagine the frustration.. ARGH!
You will be victorious next time
Sub Zero Lives
Hey, everybody has their own thing
sorry for my bad english
Gigabyte Battlefield Pi 1M #3
its the AMD bench in the F1 comp
which you are in
Benchmarks
The first five benchmarks will be...
SuperPi 32M
SuperPi 8M (on an AMD platform)
3DMark Vantage
3DMark 06 on motherboard integrated graphics
Highest FSB
http://www.xtremesystems.org/FORUMS/...d.php?t=226947
Guest Teams
Team Australia – dinos22 – Youngpro
Team USA – FUGGER – mikeguava
Team Greece – hipro5 – gprhellas
Team Finland – Sampsa – SF3D
Team Tom’s Hardware – TBC – TBC
Team China – Artkobe - Victorwang
Team Indonesia – Benny – Ekky
Team Russia – NeoForce - pofigist
it would make sense to me that you would try this bench as you were setup to run with the best chip and lhe
as it would give you an idea of what was possible
.
Last edited by bazx; 07-10-2009 at 09:50 AM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Ahh..that makes sense. Lhe results are not comparable to LN2, so maybe it was good, that we did not test it.
Lhe should not be used in that contest. I think we all agree on that.
You are as good as your samples are!
ok thanks so you do not think LHe will be used after all in the F1
.
Last edited by bazx; 07-10-2009 at 01:10 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Hmm, I've done a fair bit of asking around on this. I've already told some people that it's fine if they want. Getting rid of it because of costing and the like isn't really in the spirit of F1 but at the same time, there's no point having a benchmark where only a couple of people are competitive.
THe thing that's REALLY nailed it for me is the danger element. LHe is very dangerous indeed. Not so much because it's cold, but because of the air displacement. I've seen a lot of pictures of a lot of labs and I don't want any suffocating when all the air is sucked out of their lab when spilled. That alone is reason not to have it, frankly.
Maybe one day when all competitors have shown that they can easily access it and handle it. Most 'regular' people have their doubts about Health and Safety and LN2. But all top competition overclockers have mastered that.
So it's a NO to LHe.
i drink ln2 for breakfast
Right after you washed up with LHe huh?
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Where's Team Japan? I'd love to see duck benching 2D on AMD
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Very good decision imo.
I have to say, that this logic fails big time. You have a 39K result and you will not publish it
I respect you a lot and you are very nice guy, but I am very disappointed to see you playing like this. Mike, what the hell is going on?
I just don't understand
P.S I would like to see you post screenshots with all details visible and some tweaks explained in to some new thread. I think we all deserve to see those monster scores. Thanks! I know there is no problem for you to do that
You are as good as your samples are!
lol how exactly does that differ from you and vince playing backup games in 3DMARK01 recently
it's the same thing no?
Kingpin and SF3D were posting WRs after each other. Now look at this:
http://www.futuremark.com/community/...fame/3dmark06/
It would make sense if Andre would have some backups but not the guy who is currently 5th. Yes, no?
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
And then you piss ice cubes????
Man, that hurts....
Mike's plan is to join HWBOT right up the top from what i can see
not in the mid pack
maybe he's still not too happy with efficiency i dont know
i think he will explode with the scores when he's ready
we've seen others do that. i know hipro has done that before....put up some monster results in a million categories after a month of benching
why are you guys getting your knickers in a twist
it's his choice
how does that lessen the man as an OCer
Last edited by dinos22; 07-11-2009 at 02:56 AM.
Wrong, Mike is not joining hwbot.
Lessen the man as an OCer? What the hell are you talking about? He has a WR but not publishing it, we are just wondering why. That's all.
Last edited by Sampsa; 07-11-2009 at 03:01 AM.
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
who says he doesnt have aspirations to join HWBOT?
lol i'm losing it, that doesnt sound right
what i'm saying is why the heck would Petri be upset/dissapointed with him...i dont see a big deal
Posting Permissions
Reply With Quote
Bookmarks