Well, i've just bought an OCZ Reaper 1866 8-8-8-24.Originally Posted by Bei Fei
With all of this i don't know if i should worry... How can i see the chips?
Well, i've just bought an OCZ Reaper 1866 8-8-8-24.
With all of this i don't know if i should worry... How can i see the chips?
EVGA X58; I7 920 C0; OCZ Reaper 1866 88824; Sapphire 5870; 1x SSD; 2xWD 1Tb GP + 1 Tb WD Black; X-FI Titanium; Corsair HX 620; Lian Li PC-50P
You cannot see the chips without voiding your warranty.
1866 cl8 have micron I have them also the ones in the picture are cl9
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
yeah seen a few folks report same for that model as having elpida hyper in them
Last edited by eva2000; 07-11-2009 at 12:04 AM.
---
People, I have a question over here. The Flexx series have Elpida Hyper? Because it dont seem that they have but, if Blade series and Reaper series have, now Im in doubt of that.
yeah seen a few folks report same for that model as having elpida hyper in them
I think that the 1866 reapers are hit and miss. Some have D9 and others have Hyper. I have had both sets with D9 and Hypers. I think that the ones with black PCB have Micron where the green PCB will be Hyper.
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
3 x 2GB Corsair 2000C7 GTs..
Installed
Booted into windows
Pressed windows reboot button
rig didn't ever boot up again
ONE stick died
NOT even bench it to see how it does...
INTEL PWA FOR EVER
Dr. Who my arss...
.........
oh
that is just terrible
Pretty much guaranteed to be Elpidas anyways.. I'm almost 100 percent sure my reapers are. I dont care, as long as they dont die on me, and if they do, OCZ will be quick to my rescue as always..
PC Lab Qmicra V2 Case SFFi7 950 4.4GHz 200 x 22 1.36 volts
Cooled by Swiftech GTZ - CPX-Pro - MCR420+MCR320+MCR220 | Completely Silent loads at 62c
GTX 470 EVGA SuperClocked Plain stock
12 Gigs OCZ Reaper DDR3 1600MHz) 8-8-8-24
ASUS Rampage Gene II |Four OCZ Vertex 2 in RAID-0(60Gig x 4) | WD 2000Gig Storage
Theater ::: Panasonic G20 50" Plasma | Onkyo SC5508 Processor | Emotiva XPA-5 and XPA-2 | CSi A6 Center| 2 x Polk RTi A9 Front Towers| 2 x Klipsch RW-12d
Lian-LI HTPC | Panasonic Blu Ray 655k| APC AV J10BLK Conditioner |
Hi all,
Any reports if this Elpida kits are dieing to?
A DATA Triple channel 2133X "ELPIDA"
Thanks
CPU: i7 Intel W3540 D0
MB: DFI UT X58-T3EH8
RAM: AData X-2133F 1G X 3
HD: Western Digital Raptor 150GB
Display Card: EVGA GTX 295
AirCooling: Thermalright Ultra 120 Extreme - Cooler Cpu Black
A-data 2133X are elpida hyper based, not sure about the recent batches as not many folks have access to purchasing 2133X
I have one kit 3Gb and I’m considering buying a new 6Gb kit, but I don’t know if they are dieing like Corsair or OCZ.
CPU: i7 Intel W3540 D0
MB: DFI UT X58-T3EH8
RAM: AData X-2133F 1G X 3
HD: Western Digital Raptor 150GB
Display Card: EVGA GTX 295
AirCooling: Thermalright Ultra 120 Extreme - Cooler Cpu Black
If its elpida hyper based modules they will most likely degrade/die the same way as any other manufacturer...
I saw it here:
http://www.xtremesystems.org/forums/...d.php?t=214317
Is elpida, but I don’t see any reports off this kits dieing
CPU: i7 Intel W3540 D0
MB: DFI UT X58-T3EH8
RAM: AData X-2133F 1G X 3
HD: Western Digital Raptor 150GB
Display Card: EVGA GTX 295
AirCooling: Thermalright Ultra 120 Extreme - Cooler Cpu Black
My adata kit 2133 3x1gb died....~2 months ago......with 2.1V
My adata kit 2133 3x1gb died....~2 months ago......with 2.1V
CPU: i7 Intel W3540 D0
MB: DFI UT X58-T3EH8
RAM: AData X-2133F 1G X 3
HD: Western Digital Raptor 150GB
Display Card: EVGA GTX 295
AirCooling: Thermalright Ultra 120 Extreme - Cooler Cpu Black
I'm very lucky, corsair sent a set of GT C8s during the time when elpidas are always out of stock, great sticks not the top binned c7 but who cares right? those sticks doesnt seem to wanna die , anyone got the sticks during that famine period, should be durable ones?
even though i still use micron d9gtrs every now and then :P
Last edited by LardArse; 07-13-2009 at 08:22 AM.
Shamino you are correct, i got my Corsair Dominator GT 3x 2GB DDR3-2000 cas7 during that period of time and they have been used and abused for a long time and they dont die lol , I guess we got lucky bro.
Angelo.
Shamino & Chispy - what does the code on your sticks say? This tells you what week/year batch they are. Seems ones made in late 08 and early 09 my be more resilient, for Corsair sticks anyway.
Code will say for eg: 0847XXXX = week 47 2008
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Cryptik , My code on the sticks said 09051724 , so my guess is week 05 2009.
Angelo.
I got my 3x2 1866 dominators in the AMD rig now. Tuning them in atm hoping for 1760+ 6-6-6 1.7v
Dare me to run 32m?
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Double dare Chew* !!
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
My kit, DominatorGT TR3X6G2000C8GTF back of RMA few days ago.
Still running well too.
batch #0927xxxx
any chance of not being Elpida hypers?
HA, HA, HA....
You realy don't get it!...Do you?....
They die JUST LIKE THAT....No need to run 32M
ONLY plug them in and get into windows...
I DARE you to boot into windows if you're man enough...
INTEL PWA FOR EVER
Dr. Who my arss...
.........
my 2nd stick been running well for 3 months 24/7 at 2k 7-7-7-20 1n 1.6vShamino you are correct
Angelo.
already burned more than 100 hours of prime blend and 20-30 hours of linx.
i do test it once in a while.
never offed the comp .. only left it in sleep mode. usually if any errors on it will have sleep mode wake up issue.
first sticks no prob actually other than it not being able to run at rated voltage.
Posting Permissions
Reply With Quote
Bookmarks