GSkill F2-8500CL5D-4GBTD - Trident - Low voltage

[18 is # 1]

If they were PSC... they would scale with voltage. These sticks just do 550mhz, no matter what voltage I apply to them.
.

Powerchips don't scale with voltage (at least not much). I'm beginning to think they are Elpida since GSkill is releasing a 9600 at 1.8v

[-n7-]

Powerchips don't scale with voltage (at least not much). I'm beginning to think they are Elpida since GSkill is releasing a 9600 at 1.8v

PSC does scale somewhat with vDIMM.

I do not believe the Trident 1066 & 1200 are using the same ICs.

1200 is likely Elpida; 1066 is likely PSC or something else.

They don't have to be the same ICs; i really do not believe they are.

[MongGrel]

Heya 18, I wish they'd churn some more of those OCZ's out myself

I want 4Gb more, they'd only let you get 4 ATT :P

Had to back mine down a little to make em Prime stable I guess from the Egg posts.

[18 is # 1]

Anyone notice that the Egg is selling the Trident 1200s for the same price as the Pi 1200s?

[zsamz_]

Anyone notice that the Egg is selling the Trident 1200s for the same price as the Pi 1200s?

someone smokin crack in gskills office

[xzulu]

someone smokin crack in gskills office

[ninong]

just got mine..no go @ 1100mhz 1.85v. needs 1.9v to be stable so far

i'll try to go higher later

[FrAN_oC]

just got mine..no go @ 1100mhz 1.85v. needs 1.9v to be stable so far

i'll try to go higher later

My PC is stable @ 1100 1.8v PL6 with all 4 slots running... and I tighted subtimmings. My problem is that they don't go ahead 1100... no matter what timmings / PL / voltage I apply them.

What mobo do you have?

EDIT: I saw on your sig... I also tried these sticks on my dad's P5K premium, and 1100 is the limit...

[LagunaX]

My OCZ 4 GB DDR2 PC2-8500 Platinum Low Voltage Dual Channel Memory Kit OCZ2P1066LV4GK's come in next week.
Not to tangent too far but I'll post how they perform since they are a cheaper low voltage 2x2gb 1066 kit too.

Edit: Got the set. Here is the cpu-z. Black PCB's and 1110 rating. These stress tested to about 1150 1.8v:

[ninong]

My PC is stable @ 1100 1.8v PL6 with all 4 slots running... and I tighted subtimmings. My problem is that they don't go ahead 1100... no matter what timmings / PL / voltage I apply them.

What mobo do you have?

EDIT: I saw on your sig... I also tried these sticks on my dad's P5K premium, and 1100 is the limit...

1.904v (bios) / 1.82v (everest) running @ PL3 (default)..i try to loosen it up later. i also haven't done stability tests between 1.86 - 1.9v though

i did notice someting..i'm not that familiar with ram stability tests but it did pass memtest @ 1120mhz/1.9v ..but it wouldnt even last 3 minutes in prime95 blend with any voltage below 2.0v

[tworule]

My OCZ 4 GB DDR2 PC2-8500 Platinum Low Voltage Dual Channel Memory Kit OCZ2P1066LV4GK's come in next week.
Not to tangent too far but I'll post how they perform since they are a cheaper low voltage 2x2gb 1066 kit too.

Edit: Got the set. Here is the cpu-z. Black PCB's and 1110 rating. These stress tested to about 1150 1.8v:

hi there. I am new here. I was just reading the posts last 2-3 weeks. Can you please test them with 1200 mhz? (If possible, of course ) I am about to buy them if they are any good.
Thanks in advance

[18 is # 1]

hi there. I am new here. I was just reading the posts last 2-3 weeks. Can you please test them with 1200 mhz? (If possible, of course ) I am about to buy them if they are any good.
Thanks in advance

Welcome to the Forum. Almost all the Blade Low voltage will hit 1200. Some need more voltage than others. Since LagunaX hit 1150 at 1.8v, he should go over 1200 with 1.9v

[tworule]

Welcome to the Forum. Almost all the Blade Low voltage will hit 1200. Some need more voltage than others. Since LagunaX hit 1150 at 1.8v, he should go over 1200 with 1.9v

That is great news I wish Amazon.com would ship to Turkey... but no they do not.... ebay prices are very high for these low voltage kits...
Anyway, thanks for the info.

[Duh]

My OCZ 4 GB DDR2 PC2-8500 Platinum Low Voltage Dual Channel Memory Kit OCZ2P1066LV4GK's come in next week.
Not to tangent too far but I'll post how they perform since they are a cheaper low voltage 2x2gb 1066 kit too.

Edit: Got the set. Here is the cpu-z. Black PCB's and 1110 rating. These stress tested to about 1150 1.8v:

hi dude! My mate asked me if those could reach 1200 and if they could at what voltage..

TIA

[18 is # 1]

So anyone tried the Trident 9600s?

[psychopath]

I have 4GB Gskill Trident 8500

is very good ddr2

i have at 1100mhz at 1.85v

[TooFastForYa]

I just ordered Trident 9600s. Should be here Tuesday. Got tired of waiting for OCZs to come back in stock. Sure the Gskills are a cost premium but at least they are available.

[18 is # 1]

I just ordered Trident 9600s. Should be here Tuesday. Got tired of waiting for OCZs to come back in stock. Sure the Gskills are a cost premium but at least they are available.

Well....


By the way, the 9600 Pi are now more expensive then the Trident on the Egg.

[nugzo]

I just ordered Trident 9600s. Should be here Tuesday. Got tired of waiting for OCZs to come back in stock. Sure the Gskills are a cost premium but at least they are available.

how did the 9600's turn out? mine will be here tomorrow.

[zsamz_]

Well....


By the way, the 9600 Pi are now more expensive then the Trident on the Egg.

your Pis are mutch better

[-n7-]

I just ordered Trident 9600s. Should be here Tuesday. Got tired of waiting for OCZs to come back in stock. Sure the Gskills are a cost premium but at least they are available.

Update?

You get them?

How are they?

[Cheeseball]

Anybody having trouble getting these Tridents (F2-8500CL5D-4GBTD) at stock speeds/voltage on an AMD system? I have a ASRock A780GM-LE/128M (which states it supports 1066) and a Phenom II X2 550BE and can't get them to run at stock 1066 at all. I'm thinking it's the motherboard though.

[roedzzz]

Maybe you should try this one..
Trident F2-9600CL5D-4GBTD..

1200mhz 5-5-5-15-52 PL 6 @1.81v




1260mhz 5-5-5-15-52 PL 6 @2.05v

[GunGod]

Hi, did someone go over 1300mhz with F2-9600CL5D-4GBTD like the 1200 pi kit ?

When i try search in forum for "F2-9600CL5D" it don't give me any matches but somehow i found this thread.

btw This is my first post in XS

I've seen talk of over 1300, but never any actual proof.

As the Pi 1200s are ProMOS & scale decently with vDIMM, you can do 1200-1350 from the results i've seen.

These Tridents are almost certainly Elpida (same as the OCZ LV Blades), & you cannot get much past 1200-1275 generally.

wow 10x for fast reply

Edit:
@ aslanwas thanks i read it already took me lot of time hehe

[-n7-]

Hi, did someone go over 1300mhz with F2-9600CL5D-4GBTD like the 1200 pi kit ?

When i try search in forum for "F2-9600CL5D" it don't give me any matches but somehow i found this thread.

btw This is my first post in XS

I've seen talk of over 1300, but never any actual proof.

As the Pi 1200s are ProMOS & scale decently with vDIMM, you can do 1200-1350 from the results i've seen.

These Tridents are almost certainly Elpida (same as the OCZ LV Blades), & you cannot get much past 1200-1275 generally.