DFI UT X58-T3EH8 continued - Part 2

**cstkl1** · 07-09-2009, 05:09 PM

Originally Posted by Razer(x)

Mushkin 1600 Essential OC

2000mhz CAS 9 with 1.62v, 2000mhz CAS 8 with 1.65v

if that is cas 9-9-9-24 and 8-8-8-24
every chipset i have tested says ure scaling makes no sense
if cas 8 is 1.65v
cas 9 should be 1.55-1.57v

**Razer(x)** · 07-09-2009, 05:23 PM

Originally Posted by cstkl1

if that is cas 9-9-9-24 and 8-8-8-24
every chipset i have tested says ure scaling makes no sense
if cas 8 is 1.65v
cas 9 should be 1.55-1.57v

No, it's 9-10-9-20 and 8-9-8-20, but still searching for the lowest vdimm for CAS9, now i'm testing at 1.59v

Sorry, i just forgot to say this before and sorry 4 bad english too.

**Peen** · 07-09-2009, 07:19 PM

Got stable 4.3ghz 1.32v no HT with air.

Seems like this chip really likes less heat, since it takes 1.28v to get 4ghz HT stable, 1.3v to get 4.2ghz no HT and 4.3ghz 1.32v...

4ghz gets to like 88-90c and 4.3ghz actually only hitting 78c so far

**ci2kla** · 07-09-2009, 07:29 PM

Originally Posted by Peen

Got stable 4.3ghz 1.32v no HT with air.

Seems like this chip really likes less heat, since it takes 1.28v to get 4ghz HT stable, 1.3v to get 4.2ghz no HT and 4.3ghz 1.32v...

4ghz gets to like 88-90c and 4.3ghz actually only hitting 78c so far

That is because you turned HT off....

**Peen** · 07-09-2009, 07:47 PM

Originally Posted by ci2kla

That is because you turned HT off....

I know, but 4.3ghz will prime at same volts with HT on but it hits 100c really fast

priming now at 4.4ghz 1.36v

**ci2kla** · 07-09-2009, 08:06 PM

Originally Posted by Peen

I know, but 4.3ghz will prime at same volts with HT on but it hits 100c really fast

priming now at 4.4ghz 1.36v

Good luck then~
If you can pass 4.4Ghz prime for just 1.36 it is not bad at all.

**Peen** · 07-09-2009, 08:35 PM

it starts getting unstable once it gets above 80c but its crazy it runs about 35-40c cooler at same speed and volts just turning HT off

But yes it primed for awhile at 1.36v 4.4ghz

**OcAddict** · 07-09-2009, 11:07 PM

Hi guys,

I see many people are having trouble with OCZ sticks on this motherboard, i havent got any luck with them either

I'm currently on my 2nd OCZ3G1600LV3GK kit now, first one RMA because it didn't want to run @1600MHz whatever i did with it. 2nd kit is better, wil run 1600MHz but after one day of running the pc it will error out or crash

Finaly i ordered the sexy Corsair Dominator GT's 2000MHz 8-8-8-24 but then lighting struck, Corsair pulls Dominator GT's from the market because off problems with the Elpida Hyper chips.
I think that the ramgods don't like me

Just ordered Corsair TR3X6G1866C9DF, hope i have more luck with these sticks

**Peen** · 07-10-2009, 12:30 AM

DFI should look at this thread and fix their damn $300 motherboard.

**Kimi.Rk** · 07-10-2009, 02:24 AM

Originally Posted by Praz

Looks to me like you tested the memory of the video card.

sorry!! my big error..

**Razer(x)** · 07-10-2009, 02:52 AM

Originally Posted by OcAddict

Just ordered Corsair TR3X6G1866C9DF, hope i have more luck with these sticks

Noooo, some of them give the same problem of OCZ!

**Kimi.Rk** · 07-10-2009, 07:17 AM

Ram Stable??

**Russ_64** · 07-10-2009, 07:22 AM

The OCZ Reapers work great - they are CL9 but run at 1866 stock and will do 2000 with relaxed timings, think they are D9 chips ......

**Praz** · 07-10-2009, 07:40 AM

Originally Posted by Russ_64

The OCZ Reapers work great - they are CL9 but run at 1866 stock and will do 2000 with relaxed timings, think they are D9 chips ......

It's not a sure thing. I have some CAS9 1866 Reapers and the board won't even boot at 1700 or above. Now I have them in a P6T and they run just like you describe.

**Leeghoofd** · 07-10-2009, 07:43 AM

Originally Posted by Kimi.Rk

Ram Stable??

Honest opinion : NO, 772Mb selected out of 6gb for Linx ? 3 intenerations of Prime Blend ?

Show me a Hyperpi 8 threads 32mb, then I will say yes

**Sam_oslo** · 07-10-2009, 07:51 AM

What happens when you unlock the multiplier on a w3520? You get into Windows >@6GHZ

w3520 @6GHZ (215x28)

LOL, it was an attempt on @4.3GHZ(215x21), but somehow it ended up with x28. It was fun as long as it last.

**Kimi.Rk** · 07-10-2009, 09:19 AM

Originally Posted by Leeghoofd

Honest opinion : NO, 772Mb selected out of 6gb for Linx ? 3 intenerations of Prime Blend ?

Show me a Hyperpi 8 threads 32mb, then I will say yes

hyperpi 8 core 32 m passed!

**Leeghoofd** · 07-10-2009, 09:22 AM

Good one

I've seen my rig pass linx and even prime blend ( for a few hours) yet cap out (rebooting or locking up) in hyperpi 32Mb 8 threads.

**The Nemesis** · 07-10-2009, 09:39 AM

Originally Posted by OcAddict

Hi guys,

I see many people are having trouble with OCZ sticks on this motherboard, i havent got any luck with them either

I'm currently on my 2nd OCZ3G1600LV3GK kit now, first one RMA because it didn't want to run @1600MHz whatever i did with it. 2nd kit is better, wil run 1600MHz but after one day of running the pc it will error out or crash

Finaly i ordered the sexy Corsair Dominator GT's 2000MHz 8-8-8-24 but then lighting struck, Corsair pulls Dominator GT's from the market because off problems with the Elpida Hyper chips.
I think that the ramgods don't like me

Just ordered Corsair TR3X6G1866C9DF, hope i have more luck with these sticks

I've been running those since they were first available. Samsung HCF0's. Mine do well over 2000MHz at the default timmings.

**Peen** · 07-10-2009, 09:52 AM

Mine will only do 1530mhz with default timings and voltage...

**Razer(x)** · 07-10-2009, 10:16 AM

Somebody has problems with C1E set to AUTO?

**Ice009** · 07-12-2009, 12:38 AM

Originally Posted by OcAddict

Finaly i ordered the sexy Corsair Dominator GT's 2000MHz 8-8-8-24 but then lighting struck, Corsair pulls Dominator GT's from the market because off problems with the Elpida Hyper chips.
I think that the ramgods don't like me

Is that Corsair Dominator GT 8-8-8-24 2000Mhz kit one of the dodgy ones? I just bought that kit about a week and a half ago. I'm still waiting for other parts to arrive though so I haven't been able to try it out yet though.

I am going to use it with a DFI T3EH8 and a W3520. So what happens if the RAM stuffs up?

**OcAddict** · 07-12-2009, 10:54 AM

Originally Posted by The Nemesis

I've been running those since they were first available. Samsung HCF0's. Mine do well over 2000MHz at the default timmings.

Hoping mine will do that to

Originally Posted by Ice009

Is that Corsair Dominator GT 8-8-8-24 2000Mhz kit one of the dodgy ones? I just bought that kit about a week and a half ago. I'm still waiting for other parts to arrive though so I haven't been able to try it out yet though.

I am going to use it with a DFI T3EH8 and a W3520. So what happens if the RAM stuffs up?

This is for all off the Dominator GT's, every kit that is still on the shelf has to be send back to Corsair and will be replaced. Not every kit will have problems but they take no chanches.
If you're kit dies than you will have to RMA it and you will get a new kit

**SoulsCollective** · 07-12-2009, 11:21 PM

Well, the saga ended unhappily. Was net browsing yesterday when my rig locked up, and seconds later the smell of burning electronics filled the room. Yanked the power cord, opened the case, streams of grey smoke filling the case. Pulled everything out, unplugged everything, attached to another PSU and tried booting with one stick of RAM and old S3 Virge PCI backup card, streams of grey smoke poured from the cap near the EPS 8-pin connector and the board displayed random garbage on the LED debugger (not whole letters or numbers, just fragments lighting up).

Now to see how long warranty takes, seeing as the board was bought from Newegg in the USA earlier this year, and I'm now back in Australia again.

**rioja** · 07-13-2009, 12:44 AM

Originally Posted by SoulsCollective

Well, the saga ended unhappily.

what pwm temp you had under a load?
and what overclock?

Thread: DFI UT X58-T3EH8 continued - Part 2

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions