PHENOM II AM3/DDR3 Ram Overclocking List

chew* · 05-30-2009, 09:45 AM

See was that so hard? about time

**Oese** · 05-30-2009, 09:48 AM

nice cdawall^^

**cdawall** · 05-30-2009, 09:48 AM

Originally Posted by chew*

See was that so hard? about time

no it really wasn't sorry for being an ass about all that it was my bad and you were in the end right about the whole shebang

Originally Posted by Oese

nice cdawall^^

thanks

now for a question does anyone else see a $37 kit running pretty close to elpidia hypers?

chew* · 05-30-2009, 09:58 AM

Originally Posted by cdawall

no it really wasn't sorry for being an ass about all that it was my bad and you were in the end right about the whole shebang

thanks

now for a question does anyone else see a $37 kit running pretty close to elpidia hypers?

Unfortunately no....Only thing comparable is GTR's and maybe GTS although I haven't tested a set of gts yet......I'd much rather use 2x2gig elpida at lower volts and same speeds as this gtr.....

**cdawall** · 05-30-2009, 10:02 AM

Originally Posted by chew*

Unfortunately no....Only thing comparable is GTR's and maybe GTS although I haven't tested a set of gts yet......I'd much rather use 2x2gig elpida at lower volts and same speeds as this gtr.....

damn oh well it was worth a shot 1800 CL8 isn't bad and i really haven't tried higher clocks or lower timings yet

so far this is the best i can POST at

UPDATE

tested up to 2.1v its not 32m stable

**TiTON** · 05-31-2009, 09:01 AM

Hey GUys,

Very nice thread.. just wanted to help add my results to the database. here is one I just posted.. i will try to get a few more entries in here later.

I hope I am doing this right, if not.. please let me know:

TiTON|900Mhz | Phenom X4 955@5625 | 6-7-7-20 1T | 2.2v | 2x1GB Crucial Ballistix 2000 CL9 | Micron D9GTS | MSI 790FX-GD80 | 790FX

- Ton

**msimax** · 05-31-2009, 09:33 AM

tition very impressive clocks man

**sofos1990** · 05-31-2009, 09:38 AM

@TiTON: Is the cpu on LN2 or on cascade?
Nice clocks btw!

**Oese** · 05-31-2009, 11:09 AM

indeed.. impressive on cpu AND ram^^

**TiTON** · 05-31-2009, 12:54 PM

Hey guys, thanks for the compliments

The CPU was on LN2. I was working on tweaking the NB and Mem speed. Trying to get those things squared away, before I push Cpu & GPU

- Ton

**TiTON** · 06-01-2009, 07:44 AM

Here is some additional results that I posted on the MSI GD70 thread. Its some memory performance, that would be good for the database:

CPU on Phase, Air on Ram

TiTON| 956Mhz | Phenom X4 955@4302 | 9-11-11-29 1T | 2.3v | 2x1GB Crucial Ballistix 2000 CL9 | Micron D9GTS | MSI 790FX-GD80 | 790FX

TiTON| 952Mhz | Phenom X4 955@4283 | 7-7-7-20 1T | 2.3v | 2x1GB Crucial Ballistix 2000 CL9 | Micron D9GTS | MSI 790FX-GD80 | 790FX

- Ton

**Tomasis** · 06-01-2009, 09:16 AM

titon, good job

will we see 1000 soon?

**gOtVoltage** · 06-01-2009, 10:33 AM

Originally Posted by Tomasis

titon, good job

will we see 1000 soon?

Amazing .. im afraid to check this thread every now and then... All these sweet results.

Im trying to hold out on AM3 stuff little longer and this isnt helping

**TiTON** · 06-01-2009, 10:45 AM

Originally Posted by Tomasis

titon, good job

will we see 1000 soon?

I wish I can do 1000. You can see that at Cas 7 and Cas 9, I can do 950Mhz. There is some sort of wall at 960Mhz. I can run cas 7 and 9 @ 960.. but nothing more. It just locks up anythign over. Haven't found out what the problem or issue is yet.

Ton

**_d_** · 06-01-2009, 07:55 PM

my D9 833 MHz 6-6-6-18 2.1V

http://valid.canardpc.com/show_oc.php?id=577862

:P

**bro20000** · 06-02-2009, 01:53 AM

Originally Posted by _d_

my D9 833 MHz 6-6-6-18 2.1V

http://valid.canardpc.com/show_oc.php?id=577862

:P

SuperPI 32 test is it stable!

**cdawall** · 06-04-2009, 07:12 AM

whats the highest anyone has gotten on elpida non-hyper

this is what i'm at right now no testing for 32m as of yet but its @1.64v

**msimax** · 07-09-2009, 07:42 PM

i was bored today so i decided to play with my ram a lil @ cas 7

**Tomasis** · 07-10-2009, 05:17 AM

msimax, 932 cas7 is nice result (16min is not bad either, super efficiency)

I see that triton uses cas7 with the same memory. Your timings look so close to cas6 :P

If I remember right, you did try crucial 1800 too? 1800 and 2000 share same chips or binned separately?

**Oese** · 07-10-2009, 06:25 AM

very nice result^^

**msimax** · 07-10-2009, 11:34 AM

Originally Posted by Tomasis

msimax, 932 cas7 is nice result (16min is not bad either, super efficiency)

I see that triton uses cas7 with the same memory. Your timings look so close to cas6 :P

If I remember right, you did try crucial 1800 too? 1800 and 2000 share same chips or binned separately?

nah not 1800 but 1333 mem thats also good

Originally Posted by Oese

very nice result^^

thanks man

**MadDias** · 07-13-2009, 12:22 PM

OCZ Reaper 1664 @1.9V
955BE 3848MHz @1.472V NB 2704MHz@1.3V

**bro20000** · 07-13-2009, 01:23 PM

Msimax how come on the bios your using its dated 06/25/09 for the F3k.
When on gigabyte webpage its dated 05/22/09 for the F3k!

chew* · 07-13-2009, 01:32 PM

Originally Posted by bro20000

Msimax how come on the bios your using its dated 06/25/09 for the F3k.
When on gigabyte webpage its dated 05/22/09 for the F3k!

Because we are beta testing some additions to the bios we requested......

However f3l is quite capable as well in fact better IMO ( http://www.techreaction.net/forums/showthread.php?t=712 ) so the additions have no benefit whatsoever and just complicate things for users who have no clue what the settings do......

**bro20000** · 07-13-2009, 10:47 PM

Thanx chew! Just wondered seems strange with different dates and not diffrent bios codes!

Thread: PHENOM II AM3/DDR3 Ram Overclocking List

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions