I still have ACC and Hybrid mode in F2, but if you are worried, just back up the bios. The flashing software has an option for saving it. Just flash right back if you need to.
I still have ACC and Hybrid mode in F2, but if you are worried, just back up the bios. The flashing software has an option for saving it. Just flash right back if you need to.
Manually set your timings for your memory to reach 1600. Depending on your brand, it will tell you what to set it at. The Gskill has a chart online that you can set your memory timings to. Play with them a bit and see what you can get stable. Im still waiting on my PSU before I jump back into it to push to the max. Also if you use the F2 bios, you wont be able to unlock.
Baphomet Make sure your Hybrid, and set to auto. Also is your board revision 1?
On another note, has anyone found any mosfet coolers that actually fit this thing? I havent found a northbridge or a southbridge aftermarket cooler either that will work. Was gonna run my northbridge on my cpu loop but Im not sure if a nice passive heatsink would do the trick. My heatercore from dangerden is a beast with cooling. Seriously bout to just slap on some of those little square ones from frozencpu.
1st Rig - AMD X4 B50 3.1 Quad, MA770T-UD3P F2C, Evga 9800X2, 4GB DDR3 1600, 2x500GB, XP 64-Bit
2nd Rig - Abit IN9-32X Max, Intel Duo t2200, ATI 3870X2, 4GB DDR 800 Corsair XMS2, 2x120GB, XP 64-Bit
3rd Rig - Intel Core 960, Foxconn NF4SLi7AA-8KRS2, Evga 8800GTS 320, 4GB DDR2 800 Corsair XMS2, 160GB HD, XP 64-Bit
4th Rig - Abit NF-M2S, Athlon 64 X2 3800+, 2GB DDR2 800 Kingston, 80GB HD, Evga 7800GT, XP 32-Bit
How far are the mounting holes apart? Thermalright and enzotech make nice mosfet coolers but without a mounting hole distance it's impossible to recommend one. Maybe you can choose one out of these:Originally Posted by FLiPSiDE
http://www.jab-tech.com/Motherboard-...ing-c-225.html
Phenom II X2 550 BE @ X4 B50 3.4ghz
Cooler Master Hyper 212 Plus - 2 x 120mm Scythe S-Flex F
MSI 790FX-GD70 4GB G.Skill ddr3 1333 Pi series 7-7-7-18 1.6v
WD 250 GB Sata
EVGA 9800GT w/ Accelero S1 Rev. 2 Passive cooler
Corsair TX650w psu
I have not the slightest clue on the distance, ive been tryin to snag the mobo specs or manual online to see exactly. Ill check the manual that came with it for distance. I have a ruler, just dont measure in mm though. And thats a great site with alot of options, thank you for recommending it.
1st Rig - AMD X4 B50 3.1 Quad, MA770T-UD3P F2C, Evga 9800X2, 4GB DDR3 1600, 2x500GB, XP 64-Bit
2nd Rig - Abit IN9-32X Max, Intel Duo t2200, ATI 3870X2, 4GB DDR 800 Corsair XMS2, 2x120GB, XP 64-Bit
3rd Rig - Intel Core 960, Foxconn NF4SLi7AA-8KRS2, Evga 8800GTS 320, 4GB DDR2 800 Corsair XMS2, 160GB HD, XP 64-Bit
4th Rig - Abit NF-M2S, Athlon 64 X2 3800+, 2GB DDR2 800 Kingston, 80GB HD, Evga 7800GT, XP 32-Bit
np glad to help, just measure in inches and convert to mm.
Phenom II X2 550 BE @ X4 B50 3.4ghz
Cooler Master Hyper 212 Plus - 2 x 120mm Scythe S-Flex F
MSI 790FX-GD70 4GB G.Skill ddr3 1333 Pi series 7-7-7-18 1.6v
WD 250 GB Sata
EVGA 9800GT w/ Accelero S1 Rev. 2 Passive cooler
Corsair TX650w psu
Can you post a link for this Gskill memory chart? I haven't found it.
Great work xoqolatl!!
By the way may i Know what is your stepping for your Phenom processor?
Posting Permissions
Reply With Quote
Bookmarks