connect3D crossflashed w/ asus TOP bios & stock cooling
@1000/1150 vgpu@1.239v
connect3D crossflashed w/ asus TOP bios & stock cooling
@1000/1150 vgpu@1.239v
Did find a burnt Sapphire X1950XTX card with that arctic cooling all copper heatsink on it, and a few drills and threads later it's mounted on the XFX HD4770:
I must say that cooler is a piece of art, weighs in at a whopping 500g or so...all copper. They simply don't make them heatsinks that good anymore.
When feeded with 1.25v I get 40C idle and 50C load....and not even close to the noise as the stock coolers generates...
Did a 3D06 run with CPU@ 3.5GHz, GPU@ 1GHz and GDDR5@ 1.2GHz:
GA-H55N-USB3
i3-550 L008B555 @4.6GHz (1.36v)
Sapphire HD 5850 @1GHz/1.3GHz (1.25v)
GSkill ECO 4GB PC3-12800 @1.33GHz 6-6-6-20 1T (1.34v)
sapphire hd4770@1010/1150:
asus EAH4770@1000/1100 vgpu@1.239v:
cross HD4770 @1000/1100 vgpu@1.239v:
Last edited by pvhk; 06-28-2009 at 06:21 AM.
My XfX 4770 does 1150/1255mhz on asus top bios and a copper heatsink from a 4870x2 cooler and i am getting 3 more tommorow and they are getting watter cooled and hard modded with more mosfets and capacitors and vmod for gpu and mem
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
Nice!Originally Posted by Riska
1150 is amazing! At what voltage and temps did you get that?
GA-H55N-USB3
i3-550 L008B555 @4.6GHz (1.36v)
Sapphire HD 5850 @1GHz/1.3GHz (1.25v)
GSkill ECO 4GB PC3-12800 @1.33GHz 6-6-6-20 1T (1.34v)
it gets 1.34v on load and temps are not over 50c
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
Hmm, 1150MHz on 1.34v on air sounds a bit hard to digest.
I really need a screenie to be convinced.
GA-H55N-USB3
i3-550 L008B555 @4.6GHz (1.36v)
Sapphire HD 5850 @1GHz/1.3GHz (1.25v)
GSkill ECO 4GB PC3-12800 @1.33GHz 6-6-6-20 1T (1.34v)
It does nearly 900mhz on stock cooler and volt.
I will upload some screens later this week
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
This sounds like TSMC is slowly getting their 40nm process together
Imagine these chips at the end of this year
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55''Samsung LED 3D TV
Well, if you have said 1050MHz on 1.34v, and not 1150MHz on 1.34v I could have believed you. But this just doesn't add up, sorry.
1150MHz is impossible, at least if we are talking about anything remotely usable/stable.
GA-H55N-USB3
i3-550 L008B555 @4.6GHz (1.36v)
Sapphire HD 5850 @1GHz/1.3GHz (1.25v)
GSkill ECO 4GB PC3-12800 @1.33GHz 6-6-6-20 1T (1.34v)
I you mean running vantage remotely usable/stable you are right but just wait i am not at hom to bench the card for you i have testet 15 of the XfX HD4770 cards and they all do 1075mhz+ on a copper heatsink from a hd4870x2 and 1.34v wit asus top bios and asus smart doctor
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
all the cards do easely 1000/1200mhz on stock cooler with asus top bios and 1.34v
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
That sounds a bit more realistic.
Next step is to test the OC with Furmark.
GA-H55N-USB3
i3-550 L008B555 @4.6GHz (1.36v)
Sapphire HD 5850 @1GHz/1.3GHz (1.25v)
GSkill ECO 4GB PC3-12800 @1.33GHz 6-6-6-20 1T (1.34v)
What video 4770 may cause the above frequencies with lower voltage but with this bios?
E6850(L720 xxx vid:1,275v)lapped 3600mhz(1,264v)3800mhz(1,31v)4000mhz(1,39v)\\Ninja rev A lapped\\Dfi ut p35 t2r\\Team Xtreem 2x1gb TXDD2048M1000HC5DC (5-5-5-15 800mhz) 1,63v !!! (5-5-5-15 1100mhz) 1,91v (4-4-4-12 1000mhz)2,19v\\ Samsung 500gb F3\\Asus GTX 550Ti \\Enermax Modu+ 525w\\Case Fractal Arc Design Midi
Why should i use furmark i use the cards for bench and they kan bench 2001-2003-2005-2006-vantage no problem
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
If that's your intended use for it, you are absolutely right.
Let's see some results on those benches instead.
GA-H55N-USB3
i3-550 L008B555 @4.6GHz (1.36v)
Sapphire HD 5850 @1GHz/1.3GHz (1.25v)
GSkill ECO 4GB PC3-12800 @1.33GHz 6-6-6-20 1T (1.34v)
Did find a burnt Sapphire X1950XTX card with that arctic cooling all copper heatsink on it, and a few drills and threads later it's mounted on the XFX HD4770:
I must say that cooler is a piece of art, weighs in at a whopping 500g or so...all copper. They simply don't make them heatsinks that good anymore.
When feeded with 1.25v I get 40C idle and 50C load.
Did a 3D06 run with CPU@ 3.5GHz, GPU@ 1GHz and GDDR5@ 1.2GHz:
Hi Clint
could you tell me how to change settings in CCC
so that the core and memory can oc over 850 (in your case is 1000 core)
thank you very much!
He is using ASUS TOP BIOS on his card. You will need to flash yours to get 1GHz core in CCC
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55''
He is using ASUS TOP BIOS on his card. You will need to flash yours to get 1GHz core in CCC
Hi Lightman
Thank you for your answer
General Stefan a.k.a Fixt00l is requesting permission to koin the XS 4770 OC TeamMy only two options are the Albatron, or the Sapphire card, which one shall I go for, in order to fit the TOP bios? Also, I think that I will need the AC TWIN TURBO for the best results, can it compare to the Thermalright? Please support me, and I will bust my ass of squeezing the very last piece of MHz out of it...
Last edited by Fixt00l; 08-18-2009 at 09:54 AM.
asus EAH4770@1000/1100 vgpu@1.239v:
cross HD4770 @1000/1100 vgpu@1.239v:
First a greeting.
I have two ATI SAPPHIRE HD4770 in crossfire, with asusbios to flash, windows xp Servipack 3, net framework 3.5. Install the latest asus drivers (catalyst 9.87) as well as the latest version of SmartDoctor.
My problem is that the first card up correctly the tension and lets me get to 970/1050 on core and ram. The problem is the second card. I noticed that the SmartDoctor not able to raise the tension of the second card, and I can only get the second card to 825/1000.
My motherboard is: DFI JR 790GX-M3H5.
I beg you to tell me how you could get the second card in crossfire with the SmartDoctor. That is, driver versions are installed on your computer.
A greeting.
I dont think smartdoctor can control the voltage of multiple cards on XP.
All along the watchtower the watchmen watch the eternal return.
If you look at the second photo, the one with the headline "cross HD4770 @1000/1100 vgpu@1.239v:" in gpuz it is clear that is xp and are two cards in crossfire. So he asked as pvhk had.
I would like to get smartdoctor working on all cards så i can gå this high on all 4 cards...
1.6+v to core an never goes over 50c
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
Posting Permissions
Reply With Quote
Bookmarks