**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[tom256]

set your gtl settings manually
use 333/800 memory divider
and upgrade your bios

I have the lastest BIOS from official DFI site, but I also tried earlier versions before.
I've change gtl settings to 89/91 (with Vcore about 1.33V)and also tried 66/66, but after start motherboard shows 88, and is turning off.

I also tried with default Vcore and GTL set to 84/83. Nothing changes. Problems are the same. :/

[zsamz_]

I have the lastest BIOS from official DFI site, but I also tried earlier versions before.
I've change gtl settings to 89/91 (with Vcore about 1.33V)and also tried 66/66, but after start motherboard shows 88, and is turning off.

I also tried with default Vcore and GTL set to 84/83. Nothing changes. Problems are the same. :/

gtl settin relates to cpu vtt not cpu core

[ninong]

have you guys tried getting the display output from graphics cards in the other pci-e x16 slots? i'm trying to see if i can flash a graphics card on the main x16 slot while getting the display from a card attached to the lower pci-e slots in case i screw up my video bios flashing

[kitfit1]

have you guys tried getting the display output from graphics cards in the other pci-e x16 slots? i'm trying to see if i can flash a graphics card on the main x16 slot while getting the display from a card attached to the lower pci-e slots in case i screw up my video bios flashing

You would have to have the display card in the top slot, and the card you want to flash in another slot. Or you could just "blind flash" the card from a usb stick.

[tom256]

gtl settin relates to cpu vtt not cpu core

Now I'm able to run 10MHz more, that's still only 450MHz

[ninong]

You would have to have the display card in the top slot, and the card you want to flash in another slot.

thats exactly what i did..didnt find anything in the bios that let me change the location of the display card. well at least i was able to recover from a bad flash

thanks!

[-Zork-]

with bios 502, Don´t work... POWER on by USB

Are there anyone who use USB KEYBOARD or USB MOUSE to POWER ON???,

I configured like the manual said and don´t work on LT P35 with bios 502




Anyone know if Bios 9/19 have fixed it?? Help

[kitfit1]

well at least i was able to recover from a bad flash

Why did you get a bad flash ?

[ninong]

Why did you get a bad flash ?

i have only been using my pc for downloading lately..so i got an ati reference hd4670 ddr4 and noticed that ATI powerplay wasnt working. i downloaded the sapphire hd4670 bios ddr4 since they used the same ddr4 chips and based on reviews powerplay works on the sapphire card. well after successfully flashing i got no display from my card..so i guess that was a bad flash ;p

[Shiranui Gen-An]

Anyone else have to raise their Clockgen voltage to 2.60V to get FSB higher than around the 540 level?

[zsamz_]

Anyone else have to raise their Clockgen voltage to 2.60V to get FSB higher than around the 540 level?

nope got around 580

[Shiranui Gen-An]

nope got around 580

I can't get over 540FSB with my E8400 unless I up the clockgen voltage. Working on 550x7 right now, it'll boot with 3.60V clockgen but still not stable. 1.31V VTT, GTLs at 78/76/73. Vcore is at about 1.225V.

[zsamz_]

I can't get over 540FSB with my E8400 unless I up the clockgen voltage. Working on 550x7 right now, it'll boot with 3.60V clockgen but still not stable. 1.31V VTT, GTLs at 78/76/73. Vcore is at about 1.225V.

play with gtls the nb gtl is way too high but every board reacts different

[Shiranui Gen-An]

Trying for 542FSB 5:6 divider, I kept the CPU GTLs the same but lowered NB GTL to 58 and set clockgen back to 3.45v. The board tries to power up and just shuts down.

[zsamz_]

Trying for 542FSB 5:6 divider, I kept the CPU GTLs the same but lowered NB GTL to 58 and set clockgen back to 3.45v. The board tries to power up and just shuts down.

jump straight to 560-570fsb 1.5v+ on nb 333 or 400 divider

[Shiranui Gen-An]

jump straight to 560-570fsb 1.5v+ on nb 333 or 400 divider

Nothing doing. I think it's too hot in here and I have too much hardware in the system to clock the FSB that high.

[zsamz_]

Nothing doing. I think it's too hot in here and I have too much hardware in the system to clock the FSB that high.

you can try 65-67%
my e8600 needed 67% with dkp45+

[Shiranui Gen-An]

Looks like the UT P35 is certainly capable of high FSB: http://star.ap.teacup.com/dakara/173.html

Granted, the CPU was watercooled, but 600FSB with only 1.2VTT is pretty nuts.

[zsamz_]

Looks like the UT P35 is certainly capable of high FSB: http://star.ap.teacup.com/dakara/173.html

Granted, the NB was watercooled, but 600FSB with only 1.2VTT is pretty nuts.

1.86 is ridicoulous volts
1.7 shoulda done it

[Shiranui Gen-An]

1.86 is ridicoulous volts
1.7 shoulda done it

I noticed he had to raise Clockgen voltage to 3.60 the same as I do to get over 540FSB.

[winston856]

Hey guys I've been running the 9/13 bios with my board now for a while. I'm upgrading my Q6600 to a Q9550 and was wondering what the best BIOS would be.

Should I go ahead and grab the new 9/19? or the 5/12, 5/02? Going to be overclocking the new chip and am running Windows 7 x64.

[winston856]

Anyone?

[Jure_5]

Hello XS users, this is my first post :>

I have P35-T2R for about 20 months and i always had some minor problems, but today something big happend.
The system system froze, then i hit reset button, but system does not post since.
Cpu is Xeon E3110, ram teamgroup xtreem dark 800, psu is chieftec 550W.
If i turn computer on, it shuts down and turn on again....endlessly. I did took the battery out for about 20 minutes, but the problem remains.

This is picture of debug display.


PS sorry for my broken english.

[zsamz_]

Hello XS users, this is my first post :>

I have P35-T2R for about 20 months and i always had some minor problems, but today something big happend.
The system system froze, then i hit reset button, but system does not post since.
Cpu is Xeon E3110, ram teamgroup xtreem dark 800, psu is chieftec 550W.
If i turn computer on, it shuts down and turn on again....endlessly. I did took the battery out for about 20 minutes, but the problem remains.

This is picture of debug display.

PS sorry for my broken english.

need a big reset
take batter out longer and put a jumper on start for a while
restart it withought ram and v-card
then put em in n restart
if that fails take out cpu n put back in
btw if you have excessive pressure on the board it will do that too
make sure its not you psu or your ram

winston: the latest bios is ok

[tom256]

I update BIOS with version LP35DB07. Now overclocking seems to work and I'm able to reach FSB 500Mhz . I've also change aircooling to watercooling. Every seems bo be OK exept northbridge has 70 degrees!!!