Corsair revisits CPU cooling: introducing the Hydro Series H50

[BababooeyHTJ]

details of custom prime blend?

intel and memtest doesnt stress enough on vdimm.
i can run lower vdimm and vtt with it.

try this so far the highest stress and will show errors

run prime95 25.9 64bit set large fft and then set custom, change run fft to to max mem around 5.4gb in diagnostic mode
if hang ( could be either ioh/ich voltage or inssufficient vtt)
if more than one thread error.. insufficient vdimm
if one thread error vtt insufficient or vtt/vdimm ratio wrong ( one of them is overvolted or undervolted)

It's just a prime large fft run with run fft in place unchecked and all of your available memory enabled but it stresses your mch harder than anything that I know of. If you can pass a couple hours of that and a long small fft run and your stable as far as I'm concerned.

I should also mention that on my old e8400 I have passed 40 runs of IBT and then right after failed prime small fft in around 45 minutes on a couple of different boards, nothing a little GTL tweeking didn't fix.