DFI UT X58-T3EH8 continued - Part 2

[p2501]

memtest test 5 run fine here too.

[ci2kla]

How about try using 6x multi on DRAM but 18x multi on UNCORE?
Try test it using LINX...

For more testing, maybe try only 2 sticks, different slots, or loosen the RTL

[Razer(x)]

Hi, i have the same problem, OCZ Platinum too.

[p2501]

How about try using 6x multi on DRAM but 18x multi on UNCORE?
Try test it using LINX...

For more testing, maybe try only 2 sticks, different slots, or loosen the RTL

Thanks but I think I found it. Before I played musical chairs with the memory I set the DRAM switch frequency to increase by 15%. And I left it at that. Now I have every stick running on the channel it fits and I didn't think about the switch frequency setting. As a last resort I remembered and finaly, they like decrease 15%. Result: 20 runs LinX fine. *dances the happy dance*

[Razer(x)]

Thanks but I think I found it. Before I played musical chairs with the memory I set the DRAM switch frequency to increase by 15%. And I left it at that. Now I have every stick running on the channel it fits and I didn't think about the switch frequency setting. As a last resort I remembered and finaly, they like decrease 15%. Result: 20 runs LinX fine. *dances the happy dance*

Can you post your bios settings? I can't solve, if i reboot i lost stability

[cheapseats]

not copy waza stable yet

205bootup + PCIE 110

vTT 1.39 + 0.1375/0.01500 set

tRCD/tRP/tRAS/tRFC set in BIOS, others CPUTweaker


LSC on / maxmem 680 / core 1 affinity / no waza

220x21 / x16 uncore / x8 memory / 6-6-6-18




220x21 / x18 uncore / x8 memory / 6-6-6-18




220x21 / x18 uncore / x8 memory / 6-6-6-18 / tWTR 12




220x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12




221x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12




-------------------------------------------------------------------------

32M runs/timing tests (x10 memory)

screenshots + waza runs

[ci2kla]

not copy waza stable yet

205bootup + PCIE 110

vTT 1.39 + 0.1375/0.01500 set

tRCD/tRP/tRAS/tRFC set in BIOS, others CPUTweaker


LSC on / maxmem 680 / core 1 affinity / no waza

220x21 / x16 uncore / x8 memory / 6-6-6-18




220x21 / x18 uncore / x8 memory / 6-6-6-18




220x21 / x18 uncore / x8 memory / 6-6-6-18 / tWTR 12




220x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12




221x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12




-------------------------------------------------------------------------

32M runs/timing tests (x10 memory)

screenshots + waza runs

Great result!
Good to see you here Cheapseats

[Longbow]

Longbow
ver 2.1

Sorry for the late reply. I used to have the same memory as you but I sold it. v2.1 Dominators are elpida ICs. Like you, I had trouble in stabilizing my overclock @ 200mhz and above with my D0. Whats worse is, the more voltage I add, it just made it worse. I had trouble with my C0 as well, but it wasnt as bad as my D0. Im convinced this board has issues with elpida ICs+D0s. Try borrowing another ram set and try again. Prefferably OCZ as I had better luck with my Intel extreme sets.

[eva2000]

nice work cheapseats pretty spot on

[Peen]

So this board is good with Xeon? stupid Mwave are a bunch of boners and wont RMA my barely hurt board... so need a new one. Cant decide between this or Rampage II Gene??

[eva2000]

So this board is good with Xeon? stupid Mwave are a bunch of boners and wont RMA my barely hurt board... so need a new one. Cant decide between this or Rampage II Gene??

No probs with W3520 here with DFI UT X58-T3EH8 @4877Mhz on Water cooling http://i4memory.com/f80/w3520-h20-48...8-t3eh8-18198/

[Peen]

Hmm think I may get this over the Rampage II gene. Unless someone can sway me to the Gene hehe

[The Nemesis]

Hmm think I may get this over the Rampage II gene. Unless someone can sway me to the Gene hehe

Ive got both, unless u need matx definetly go DFI

[Razer(x)]

Hi, i have the same problem, OCZ Platinum too.

Any suggestion?

[Peen]

Ive got both, unless u need matx definetly go DFI

Awesome, thanks I will for sure get the DFI

Whats the diff between T3EH6 and T3EH8?

And whats the prob with OCZ Plat I see above my post? I have that ram. Thanks

[p2501]

Okay. Now it gets annoying, I rebooted to save the settings that ran 20 passes of LinX fine, after reboot everythings as unstable as ever. Insta BSOD.

[Razer(x)]

Okay. Now it gets annoying, I rebooted to save the settings that ran 20 passes of LinX fine, after reboot everythings as unstable as ever. Insta BSOD.

I told you, you have the same problem of mine

[p2501]

I told you, you have the same problem of mine

Okay, well then I'm officially out of ideas. How can one setting be stable and at the same time unstable after reboot?

And whats the prob with OCZ Plat I see above my post? I have that ram. Thanks

Basically it's problematic somehow to get them to work at 1600 (combined with BIOS 0508 and W3520).

[Razer(x)]

Okay, well then I'm officially out of ideas. How can one setting be stable and at the same time unstable after reboot?

I really don't know. I've tried a lot of config/settings, the vtt/vdimm ratio is ok, but everything's unstable after the reboot. Nothing to do

EDIT: Isn't a cpu problem, 'cause i'm with a 920 D0. But we have the same kit of rams, so.....

[p2501]

I really don't know. I've tried a lot of config/settings, the vtt/vdimm ratio is ok, but everything's unstable after the reboot. Nothing to do

EDIT: Isn't a cpu problem, 'cause i'm with a 920 D0. But we have the same kit of rams, so.....

Maybe we're coming back to my hunch with the subtimings. Sadly I didn't do a screenshot of the working configuration. The BIOS sets the RTL values to 50-52-53 at 1600, but far looser at 1200, that is one point I don't understand.

[Razer(x)]

Maybe we're coming back to my hunch with the subtimings. Sadly I didn't do a screenshot of the working configuration.

Really don't know. Now i'm with the 227 bios (suggested for this problem with Boot Up Base Clock 135 by BlackDragon) and memory running at 1800mhz 8-7-7-20.

Stable, but unstable after reboot. As far as i know, anybody has solved this problem.

[Peen]

Okay, well then I'm officially out of ideas. How can one setting be stable and at the same time unstable after reboot?



Basically it's problematic somehow to get them to work at 1600 (combined with BIOS 0508 and W3520).

Great and I just ordered the board. Is it due to the bios or something?

[Razer(x)]

Great and I just ordered the board. Is it due to the bios or something?

Nope, it doesn't. There's a kind of incompatibility, but i don't know what chips this ram mounts.

Sorry 4 my english.

[ChaosMinionX]

So now there's 3 people having problems with running their memory at 1600. We need someone who knows his/her way around mem subtimings. I forgot to add that for me this behaviour started when I set the bootup base clock to 185 to get rid of this annoying reboot-at-26. Before the setup with 1600 was good for 9 LinX runs before BSOD.

I noticed using CPU Tweaker that my sub timings did not match the XMP for my Dominator 1600CAS8 stuff.... I manually set some stuff like TRFC, did the TRRD set to 14 so it shows up as 6 and some other timings. I also +1 to Channel C on RTL it seems to be doing a little better.

[p2501]

I noticed using CPU Tweaker that my sub timings did not match the XMP for my Dominator 1600CAS8 stuff.... I manually set some stuff like TRFC, did the TRRD set to 14 so it shows up as 6 and some other timings. I also +1 to Channel C on RTL it seems to be doing a little better.

Did you find some kind of spec sheet for your ram to set the timings or did you try around for a bit? Would be nice to know if something like that exists for OCZ memory.

What bothers me the most is that one boot is stable, the next is not.