Update on my D0

With the below I'm prime stable for 12hrs, I've only ran 10 passes of LinX but so far better than before and 3-4 degs less

Advanced CPU Features:
CPU Clock Ratio ................................ [ 20x]
Intel(R) Turbo Boost Tech ...................... [Enabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enabled]
CPU Enhanced Halt (C1E) ........................ [Enabled]
C3/C6/C7 State Support ......................... [Enabled]
CPU Thermal Monitor ............................ [Enabled]
CPU EIST Function .............................. [Enabled]
Virtualization Technology ...................... [Enabled]
Bi-Directional PROCHOT ......................... [Enabled]

Uncore & QPI Features:
QPI Link Speed .............................. ( x36) [6876MHz]
Uncore Frequency ............................( x16) [3056MHz]
Isonchronous Frequency ......................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [Enabled]
BCLK Frequency (MHz) ................................[191]
PCI Express Frequency (MHz) ........................ [100]
C.I.A.2........................................... .. [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance ...................... [TURBO]
Extreme Memory Profile (X.M.P) ........... [Profile1]
System Memory Multiplier (SPD) ........... [AUTO]
DRAM Timing Selectable (SPD) ............. [MANUAL]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................8
tRCD ..................................8
tRP ...................................8
tRAS ..................................24
CR.....................................1

Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [DISABLED]
CPU Vcore ..............................[1.4] (1.312v under load)
QPI/VTT Voltage 1.150v .................[1.335]
CPU PLL 1.800v .........................[1.3]

MCH/ICH
PCIE 1.500v ........................... [1.5]
QPI PLL 1.100v ........................ [1.3]
IOH Core 1.100v ....................... [1.16]
ICH I/O 1.500v ........................ [1.5]
ICH Core 1.1v ......................... [1.1]

DRAM
DRAM Voltage 1.500v ..............[ 1.66]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]