BloodRAGE PCI-E and Bclk Mod

[hipro5]

Have you measured the PCI-E frequency with a frequency counter to be sure that it is 120MHz OR just of what you see in setfsb?

I'm asking you this because the datasheet of the PLL Clock generetor IC writes down that whatever you pick as for PCI-E frequency, it locks it at 100MHz...


Bios engineers of Bloodrage mobo SUCK BIG TIME....
Why?
In bios G22 and G25 (haven't tested the other's) the VCore and the VQPI are OPPOSITE...
When you change the VCore into bios, ACTUALY you change the VQPI and when you change the VQPI, it changes the VCore...

Go someone and get a multimeter and measure the VCore...
Go into bios and change it...
You'll read the SAME VCore after save and exit, bla, bla, bla...
Now go and change the VQPI and you will see that the VCore is changing...

I don't know IF this is involved with the pre-released BloodRage mobo or not, I just say what I see and measure because I was about to burn down my CPU by thinking of feeding it with more VCore, though I gave it OVER 1.65 VQPI without knowing it...