Quote Originally Posted by JPQY View Post
When your system freezes most off the time to low vcore,dram voltage or Qpi/dram core volt.
The first two looks good so how much is your Qpi/Dram Core Volt.
What cooling you using.. your temps!
Your power supply(psu)..i think must be strong enough.
Is your C-State Tech Enabled? this can make it unstable when using higher overclocks -> So Disabled it!
and so on..so we need all your settings to help you!

And guys i still need results from a W3520 for my list who give it a try
http://www.xtremesystems.org/forums/...d.php?t=202139
Or any new cpu i'am missing!!

JP.
My Qpi/dram is at 1.35, is that too high? Im on air cooling, using a TRUE with 2 x scythe ultra kaze 2000rpm fans in push /pull setup. idle i get around 38-40c, and load with prime in get 77-80c max. My PSU is a 850w toughpower, so this should be adequate power for my OC?

These are some of the stuff i have disabled / enabled in my bios

Advanced CPU Features:
CPU Clock Ratio ................................ [20x]
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [disabled]
C3/C6/C7 State Support .................... [disabled]
CPU Thermal Monitor ......................... [disabled]
CPU EIST Function ............................ [Enabled] <--should i have this disabled?
Virtualization Technology ................... [disabled]
Bi-Directional PROCHOT ..................... [disabled]