Results 1 to 25 of 3432

Thread: Core i7/X58 Overclocking Thread

Hybrid View

  1. #1
    Xtreme X.I.P. JPQY's Avatar
    Join Date
    Aug 2006
    Location
    Belgium
    Posts
    311
    When your system freezes most off the time to low vcore,dram voltage or Qpi/dram core volt.
    The first two looks good so how much is your Qpi/Dram Core Volt.
    What cooling you using.. your temps!
    Your power supply(psu)..i think must be strong enough.
    Is your C-State Tech Enabled? this can make it unstable when using higher overclocks -> So Disabled it!
    and so on..so we need all your settings to help you!

    And guys i still need results from a W3520 for my list who give it a try
    http://www.xtremesystems.org/forums/...d.php?t=202139
    Or any new cpu i'am missing!!

    JP.
    -Core i9 7980XE @4,20Ghz Vcore:1,10V
    -Asrock X299 Taichi XE
    -Custom water-cooling loop
    -16Gb Corsair DDR4 3200Mhz
    -Samsung 970 evo Plus 500Gb
    -Samsung 960 evo 250Gb
    -Samsung 850 evo 500Gb
    -Samsung SH-S223Q
    -Asus RTX 2080 Dual OC
    -Cooler Master HAF 932
    -Seasonic Prime 1300W Gold

    Test results are always welcome with this Chess Test where all your cores/threads will run @100% ,Thanks
    http://www.xtremesystems.org/forums/...=1#post5259523

  2. #2
    Registered User
    Join Date
    May 2008
    Posts
    31
    Quote Originally Posted by JPQY View Post
    When your system freezes most off the time to low vcore,dram voltage or Qpi/dram core volt.
    The first two looks good so how much is your Qpi/Dram Core Volt.
    What cooling you using.. your temps!
    Your power supply(psu)..i think must be strong enough.
    Is your C-State Tech Enabled? this can make it unstable when using higher overclocks -> So Disabled it!
    and so on..so we need all your settings to help you!

    And guys i still need results from a W3520 for my list who give it a try
    http://www.xtremesystems.org/forums/...d.php?t=202139
    Or any new cpu i'am missing!!

    JP.
    My Qpi/dram is at 1.35, is that too high? Im on air cooling, using a TRUE with 2 x scythe ultra kaze 2000rpm fans in push /pull setup. idle i get around 38-40c, and load with prime in get 77-80c max. My PSU is a 850w toughpower, so this should be adequate power for my OC?

    These are some of the stuff i have disabled / enabled in my bios

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [disabled]
    C3/C6/C7 State Support .................... [disabled]
    CPU Thermal Monitor ......................... [disabled]
    CPU EIST Function ............................ [Enabled] <--should i have this disabled?
    Virtualization Technology ................... [disabled]
    Bi-Directional PROCHOT ..................... [disabled]

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •