Quote Originally Posted by ChrisB17 View Post
I cant get this board stable with my I7 920 D0 for the life of me.

1.21 vcore (Proven stable at 1.2)
1.45 cpu vtt
1.08 nb voltage
1.65 dram voltage.

What else can I do?
What do your timings look like? I could be way off base here but I've noticed that a couple of my mem kits are very sensitive to voltage in this board. One in particular, some gskill pi 1600, gets weird with 1.65 but if I go to 1.635 they are solid.

Quote Originally Posted by Lu523 View Post
I have one of these mobos. I have not tweaked the bios yet. Running it at 175x91 with a 920 C0 chip. I need to speed it up or see about dropping the voltage on the cpu.
If that's the 920 I sent you, while it will overclock pretty nicely, it really isn't going to use low volts like some. Iir, temps should be reasonable even using 1.45v or more though. I had pretty much decided that all my C0's were 3.8-3.9 crunchers and no cherries. I didn't really do a hell of a lot better with the batch of D0 xeons I bought to replace them. I'm traditionally very unlucky when it comes to buying cpu.