DFI UT X58-T3EH8 continued - Part 2

[PRJ]

I've changed to 7-8-7-20 & ioh/ich 1.21 & vioh analogue 1.2v & Vdimm 1.665 and still i can't pass 32 mb superpi. I havent tryed all your suggestions yet, so theres still some hope, will reply with results...

PRJ also check your IOH/ICH voltages too - 2 threads worth reading

1. Prime95/LinX/Super Pi 32M stability tweaks
2. DFI UT X58 - tRRD, RTL, tFAW timing discussion.

Windows memtest isn't really useful at all for cpu vtt/mem testing for me i can pass windows memtest at lower cpu vtt than 8x32m hyperpi or linx or single 32m pi require.

also since you're running GT mem try 7-8-7-20 instead.

Also on vista/win7 maybe need to disable audio device/driver for super pi for some folks

try running 8x 32m pi via hyperpi v0.99b if you can pass that at higher mem frequency than single super pi 32m, then you may have the issue Praz described. If not then more likely setting wise you haven't found the right settings/voltages.

I can't pass hyperpi v0.99b

I tryed @ optimized default settings, just disabeling the things i dont use, setting HPET for 64 bit and the usual. NOT even here was superpi able to finish...!! Somthing must be wrong!