Gratz on the 133K 01 Pro

**Achill3uS** · 06-06-2009, 02:44 AM

way to go pro

**massman** · 06-06-2009, 03:36 AM

Vince's back - http://hwbot.org/result.do?resultId=861112

"Jun 06, 2009 05:58 CDT"

Never give Vince an incentive to bench, he's dangerously dedicated. I've been told how long he was aiming for a good CL ... 6 hours is just CRAZY!

**dinos22** · 06-06-2009, 03:41 AM

6 hours CL repeats?
i dont believe it

i have a feeling 134K is not far away

**eva2000** · 06-06-2009, 03:46 AM

6hrs on CL

dam

**massman** · 06-06-2009, 03:48 AM

If you find that impressive, just ask him how much LN2 he blew on the CL subtest

**AndreYang** · 06-06-2009, 04:49 AM

Originally Posted by dinos22

6 hours CL repeats?
i dont believe it

i have a feeling 134K is not far away

Maybe 100+ times CL, 100+ CH, 100+ nature.

**hey** · 06-06-2009, 05:35 AM

Originally Posted by AndreYang

Maybe 100+ times CL, 100+ CH, 100+ nature.

last time i benched 01, did 36times CL but couldnt get the boost and system reset

what a luck

wish had 6.4+ cpu and a good 295gtx to compete

**youngpro** · 06-06-2009, 06:42 AM

Originally Posted by massman

Vince's back - http://hwbot.org/result.do?resultId=861112

very impressive mate, always got that little something on me

**artkobe** · 06-06-2009, 06:49 AM

congratz M8!
01 super man is back,hhaha

**Oliver** · 06-06-2009, 07:15 AM

Originally Posted by youngpro

well dont get it wrong, this board is alot of work to get right, its performance compared to the RE is about on par but you must work very hard... its satisfying when it all comes together on a board like this though... all p45 is very similar though and you can manipulate the mch in a similar way on most of these boards

Thanks for posting in Pro ,

the DFIs tend to by like this for sure , remember back to P35 days where they also where flying crazy , if you putted your time into it , same goes with the P45 ut t2rs , solid board once u get it rocking, you really did an great job with this as a whole "result" package , both fsb/performance wise on the board and also 2k1 score

keep pushing it ...

Vince stellar work

**Zeus** · 06-06-2009, 07:44 AM

Wow, 6 hours of trying to get a good CL is just nuts! I usually have a good one within 10-15 tries, or maybe i'm too easily satisfied?

Good work both Pro and K|ngp|n!

**k|ngp|n** · 06-06-2009, 11:16 AM

haha well maybe 6hrs is a "slight" embellishment

Yah was crazy though, I have NEVER run CL that many times before to get a good run, it was insane. Then I gambled when I got a good one finally thinking I could get a slightly better one and lost it and it took twice as long to get it back on same run lol. Damn CL marathon with everything in the system on the brink, before I got the score I wanted. Benched from 9pm-5am just about, then drove home from east lansing and ran the boring op on ten pieces F1 alu tops before I crashed lol.

**over@locker886** · 06-06-2009, 11:46 AM

huhh, insane numbers and works here !! Congrats to youngpro and Kingpin!

**miahallen** · 06-06-2009, 12:34 PM

Nice one James, but it's your turn again

Very impressive as always Vince

**DeDaL** · 06-06-2009, 12:54 PM

Guys its just insane, congrats you both

Cool challenge

**F.O.G.N.A.** · 06-06-2009, 03:47 PM

Congrats youngpro & k|ngp|n

6hr of CL ?

**ZillaPct** · 06-06-2009, 07:22 PM

Nice work dream mans of 3Dm01...

your fsb x PL you used is dangerous, pity that do not exist RAM Cas 6 for this frequency otherwise new level of Performance level are possible to use.

PL and CAS are consequential, with low CAS is possible to attach a low PL at same value of FSB frequency and strap.

**youngpro** · 06-06-2009, 10:25 PM

i might try again once my corsair gt's arrive.. maybe i can hit some pl8 with your ideas zillapct

**dduckquack** · 06-07-2009, 01:16 AM

Originally Posted by youngpro

i might try again once my corsair gt's arrive.. maybe i can hit some pl8 with your ideas zillapct

uhoh looks like someone will need 7hrs CL after pro is done with his new mems

**Oliver** · 06-07-2009, 01:27 AM

Originally Posted by youngpro

i might try again once my corsair gt's arrive.. maybe i can hit some pl8 with your ideas zillapct

hypers would be the bomb for sure , however havent seen them played on p45

interesting war , going on huh

keep pushing it

**tiborrr** · 06-07-2009, 02:09 AM

Originally Posted by youngpro

i dunno to be honest if thats buggy or not, i consider it might be buggy as i would expect lobbies/dragos would reap the benefits if it were that high...

thanks guys for your kind words... too bad this is the only benchmark im good at =p

That's the only benchmark you ever need to be good at imho. The others 'benchmarks' are not real benchmarks.

Keep it up, buddy. 2k1 for life!

**Vivi** · 06-07-2009, 02:39 AM

let me say 1st, Freaking amazing JOB james, insane stuf..

my dominator 2000 cl8 gt's dont do wonderful on my board, they get about close to same speeds , 1000 8-7-7-20, i think it could do cas 7 i dont know.
Maybe its the C7's that are insane.

also, i got pl8 easy when my NB was at -20 ish on ln2. on both my old and new memory kits.

**hipro5** · 06-07-2009, 06:03 AM

Congratz Pro....

I have encoded a lot of problems booting the GTX295 with my VGA Maximizers.....

I used to get green led but no blue led to boot....
Then I had red led and no boot....
One capacitor on one VGA was sortcircuited and one Voltera Digital Mos-Fet was sortcircuited too (passing the 12V on it's output and back on Voltera VCore IC)....
I unsoldered them and finally today, I managed to boot up....

So I'll join the game....

P.S. Way to go Vince....

**eva2000** · 06-07-2009, 06:12 AM

WTF George that's awesome and crazy mods there

**hiwa** · 06-07-2009, 06:19 AM

congrats Pro & vince
133k is just amazing guys

Hipro is keep moding it eh ..

Thread: Gratz on the 133K 01 Pro

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions