we've found THE GOLDEN ONEs : AMD Athlon64 World Record Thread!!

[TheKarmakazi]

Im unsure if these chips are any good, but I am looking for someone who can put them to good use (subzero!). They have been sitting in storage forever here at my office. So let me know if they're decent, I will let em go for cheap

AMD Athlon AYHJA 0128TPJW
AMD Athlon K7550MTR51B C
AMD Duron ANCA 0104APGW
Two (2) AMD K6 A 9833BPCW & A 9813APDW - No info on web available but if memory serves they're the 233mhz or 266mhz ones.
AMD Sempron KDYHA 0510RPMW -2200+
AMD Athlon JIUHB 0308WPMW - XP1800
AMD Duron AKCA 0047MPMW
AMD Athlon ASHHA 0126MPMW
AMD Sempron 2800 LFBAE 0645UPAW

[[XC] Oj101]

I wouldn't mind AMD Athlon JIUHB 0308WPMW - XP1800 and the Durons PM me a price please.

[boblemagnifique]

Im unsure if these chips are any good, but I am looking for someone who can put them to good use (subzero!). They have been sitting in storage forever here at my office. So let me know if they're decent, I will let em go for cheap

AMD Athlon AYHJA 0128TPJW
AMD Athlon K7550MTR51B C
AMD Duron ANCA 0104APGW
Two (2) AMD K6 A 9833BPCW & A 9813APDW - No info on web available but if memory serves they're the 233mhz or 266mhz ones.
AMD Sempron KDYHA 0510RPMW -2200+
AMD Athlon JIUHB 0308WPMW - XP1800
AMD Duron AKCA 0047MPMW
AMD Athlon ASHHA 0126MPMW
AMD Sempron 2800 LFBAE 0645UPAW

Nice pcs

For the Old Step AMD (XP / Babar / XP-M & the first A64 s754/s939) , you can check my Old List of Stepping

http://forum.hardware.fr/forum2.php?...0&new=0&nojs=0

[stunned_guy]

hi guys

Today i recieved :

9 x A64 3000+ YBBLE 0523 EPAW & CPBW
1 x A64 3200+ LBBLE 0543 WPMW

I instal my XP too

Configuration :

DFI LP NF4 SLI DR
2x512 Old BH5 Adata
Nvidia 8800GTX 768mo
Waterchiller & Caskade 2 stages

wait & see

Nice to see u back here on socket 939
The YBBLE couldt go nice under cascade...but the CPBW is crap...no chance to go high.
These are all venice E3 so I guess that there will not be some high scores because the best of the 3000+ are all venice E6. But give your best it could be one of the good scores.

[knopflerbruce]

Nice to see u back here on socket 939
The YBBLE couldt go nice under cascade...but the CPBW is crap...no chance to go high.
These are all venice E3 so I guess that there will not be some high scores because the best of the 3000+ are all venice E6. But give your best it could be one of the good scores.

Kiwi has/had a NICE 3000+ E3, if I remember correctly... Some of them have very sub-zero friendly coldbugs

Sometimes the xPBW's are good, too. I just got both wprime1st places for Opty 146 with one of those... 3.5ghz on phase

[[XC] Oj101]

Thanks for the link boblemagnifique

[Turrican]

nice, looking forward to some great results

[knopflerbruce]

One of my 3500+ NC's did 380mhz HTT under phase... that one will ROCK on LN2 (which I may be getting soooooon...)!

[crio]

Vintage bench....I like....

[stunned_guy]

@ Knut
Stepping of that 3500+ newcastle ? Sounds crazy !

[knopflerbruce]

@ Knut
Stepping of that 3500+ newcastle ? Sounds crazy !

CBAXC 043x something.

Can't believe I don't remember the exact stepping, normally I remember such details... Perhaps 200++ K8 chips is a little too much for my brain

Btw, did you ever try ITE SG when you ran the clawhammers on LN2? What temps did you see? I tried one on Friday, and it seemed to bug at 126 in ITE (so I guess -130c on that sensor). Too little insulation, so sucky clocks - just 3769MHz (not the one I bought from you). At least something was limiting my efforts, my FX55 which I got to 3850 on dice did 3887 on LN2, and on dice temps only 3650 or something.

[stunned_guy]

I ever used ITE SG and it worked fine. No conflicts. But with the newer cpus like x2 7750 or x3 8750 it showed only up to -80c. This is also shown in the BIOS but the temps are much lower than taht.

Very old clawhammer. But its no es cpu by the way like the fx-55 clawhammer from mine.

[knopflerbruce]

I ever used ITE SG and it worked fine. No conflicts. But with the newer cpus like x2 7750 or x3 8750 it showed only up to -80c. This is also shown in the BIOS but the temps are much lower than taht.

Very old clawhammer. But its no es cpu by the way like the fx-55 clawhammer from mine.

If you're referring to the one I tested, it's indeed the same type of chip. AAAXC 0421SPAW (did 3.5g suicide on dice). The woman(!) I bought it from got it from her husband/boyfriend who worked for AMD

Do you remember what your FX53 (mine now) did on dryice (or SS)? Just for the sake of comparing the two I feel it was underperforming alot on LN2... 250mhz gain from 100c lower temps doesnt sound right to me

[[XC] Oj101]

CBAXC 043x something.

Can't believe I don't remember the exact stepping, normally I remember such details... Perhaps 200++ K8 chips is a little too much for my brain

Btw, did you ever try ITE SG when you ran the clawhammers on LN2? What temps did you see? I tried one on Friday, and it seemed to bug at 126 in ITE (so I guess -130c on that sensor). Too little insulation, so sucky clocks - just 3769MHz (not the one I bought from you). At least something was limiting my efforts, my FX55 which I got to 3850 on dice did 3887 on LN2, and on dice temps only 3650 or something.

Wow dude, my FX55 did 3916MHz on LN2 @ about -170'c but only 3.45GHz on phase. Those are crazy clocks!

[stunned_guy]

With single stage the fx-55 did around 3.6 ghz i remember. it needed LN2 for some real clocks.

[knopflerbruce]

Just smashed the 4000+ Clawhammer WR by like 60 mhz Will try more once the LN2 level is low enough for the chip to boot I can still pump more voltage through it, only 1.87v now.

I think it's not the CPu itself that bugs, it's the damn sensor - both my FX53 and this 4000+ seemed to autoshutdown at 127 in ITE (perhaps it thinks the temps are 128+ or something once that barrier is broken...). I wish I cold disable it

[knopflerbruce]

Session over... scores here:

http://www.xtremesystems.org/forums/...9&postcount=31

Check out that 3200+, Phillip S.I.H.

[stunned_guy]

Very very very nice work, Knut !!! Seems that this cpus didn´t have some high cold bug.

Did you tweak for superpi ?
That 4000+ clawhammer record is great i had once a 4000+ that was pretty good under my single stage ( its that one on place no. 3 ) but I sold this one before testing under LN2 That would be one great cpu I think some better like yours It was one of my fist socket 939 cpus ever ( there was no better cooling first )

Very good work again, Knut If I see that scores I miss socket 939

[[XC] Oj101]

So come back!

[Turrican]

yeah bro get back and oc that old stuff again.

[stunned_guy]

No problem, 2 dfi boards, bh-5 kit and around 10 very good dual cores are available
But there is no time....i have to test some good dimms and cpus for am2+.

[knopflerbruce]

No problem, 2 dfi boards, bh-5 kit and around 10 very good dual cores are available
But there is no time....i have to test some good dimms and cpus for am2+.

Booo!

Thanks for your nice words, btw

Trying some more stuff as we speak... 3500+ NC 2nd place is mine (was mine already, but now it's alot closer to the 1st spot) - but I would've got the WR if this chip didn't CB at -96c It's idling in BIOS now at 2.08v to raise the temps so I can remove the pot. Couldn't care if it dies... 2 pins are missing, so no dual channel benching either

Edit: I forgot I tried that other one (the one WITHOUT CB) on wednesday, with no real success, but I still got a higher score than with this chip *blush*

[[XC] Oj101]

Hmmm, missing pins = missing dual channel? That begins to explain my FX-55... Ever since my 3916MHz run I've lost dual channel below 7'c...

[stunned_guy]

@ oj101
Did your 6000+ in your signature have a cold bug ?

[knopflerbruce]

Hmmm, missing pins = missing dual channel? That begins to explain my FX-55... Ever since my 3916MHz run I've lost dual channel below 7'c...

Try it on a different board. My Opty 154 seemed to lose dual channel completely on my Expert (instant 3-LED beeps with 2 sticks installed), but on a DFI NF4-D it passed that point (had no video card in as it was just a QUICK test, no cooling on the CPU and held the mobo in my hand - so I didn't test it 100%)