Quote Originally Posted by hellcamino View Post
I bumped the PLL just trying to get it to run stable at stock speed initially! Small fft's would fail in under 2 minutes at stock with PLL left on auto, I worked it up to a bit over 2.6v IIRC. I can't check the bios until tommorow as I have the machine torn down to put together a real lcs for it. I did notice that it took less vcore to run a given speed afterwards and the cpu-z reported vcore was much closer to bios setting with less apparent sag under load.
Hellcamino,

Thanks for the info. I belive stock PLL is like 2.4 ~ 2.5v. Whenver you get a chance to get the info, that woudl be cool. Anything that can lower vCore is of interests

Thanks again.

-Ton