[Project] ||| Phantom ||| in a LL PC-P80

[seba84_2005]

DOBRO thermochill shroud they're available in germany (www.aquatuning.de)

Regards from Polish

[D0BR0]

Thanks again for your nice comments!

And thank you seba!!
I'll have a look at this shop, I need to order something from them, so I'll probably take this shroud.

[EDIT] I just went to aquatuning, and they only have the 120 and 240mm version!! No 360!

[Baxxxter]

Thats a nice project you got there...

[Makymaco]

Do your hard drives have any airflow ?

[D0BR0]

Well, not for the moment. But later on, I'll cut an opening in the left side panel, and put a mesh grill there. But anyway, the drives don't heat up much, so they'll probably be warmer of 2 or 3 degrees, not more.

[NaeKuh]

wow awesome paintjob u got there bro!

[D0BR0]

Thx
Today was too windy to continue painting, so next week-end, I'm receiving my 1.2kW PSU, but I also hope finishing the paint job for all the components, and I hope powering everything up by next week-end (not this one...)

[D0BR0]

Pump mount, there's gonna be a bit more space between them

[TOM-UK]

does the thermochill on the bottom pull air into the case?

[D0BR0]

No it pulls the air out of the case, otherwise there would be too much dust inside the case if it pulled the air in!

[BNDMOD]

Suscribed!!! i need to see more of this!

[grasskicker509]

sweet hardware you got there and very nice project you got going...where did you get those individual chrome letters?

[D0BR0]

Thanks guys I'll maybe post some pix's this week-end.

For the letters, I bought them in an auto-shop. But I'm not sure whether I'm gonna use them or not.

[shazza]

Great job. I hope you end up using the letters ... they look good.

[D0BR0]

Yes they do, that's for sure, but I will receive some engravings on black plexi, with a big P for... Phantom (), and another one with my nick. Actually they'll be covering the bays (the "side panel"), and the top of the case where there's the PSU and all the wires. Well, they won't be engravings, but they'll but cut, and I will put a white plexi plate behind them, and some white cathode backlight Hope it's gonna be good looking!

[GregSG]

Love ur usage of plexi!

Would love to see the designs...

Very inspirational

[D0BR0]

Thanks mate! Unfortunately, they're not ready atm... They'll be ready in 2 weeks I hope

[aka_GK]

nice project!
btw where are u from?

[D0BR0]

Thx It's a very nice feeling to see that you all like this project, motivates me a lot!

I'm from Switzerland, but I'm polish Have been living in Switzerland for 12 years now, so it's like home, but I'm 0% swiss, just got the passport, but Italian and Polish blood inside me

[eponymous]

Looking good man

I'm watercooling inside a PC-P80 as well and I was wondering which EK reservoirs those are? Are they easy to fit?

[aka_GK]

D0BR0, your nickname spells like transliterated russian word ДОБРО, which means kindness
I hoped you are from Russia, but actually I don't believe that somebody from Russia can make build like this and pay so much attention to details. But I wish I can

[D0BR0]

Yeah they fit really nicely, as you can see, and they're 150ml. Multioption obviously. I was wondering whether to take or not the 250 version, but I saw SNiiPE_DoGG using it, and it was pretty tight. Actually I wanted to mount the pumps in the bays, and the bottom of the 250 rez's were kinda touching the fans on the rad, if fixed in the place I wanted them to be. Personally, I find the rig with the 150 version much more "breathing". There's plenty of space with those reservoirs, and they fit nicely in this not aligned position.

aka GK Haha lol! Well, nice to know the origins of my nick. Actually it's taken from a song from Massive Attack, called.... dobro Just changed the characters. And this signification pretty much sticks to my personnality.

[eponymous]

Yeah they fit really nicely, as you can see, and they're 150ml. Multioption obviously. I was wondering whether to take or not the 250 version, but I saw SNiiPE_DoGG using it, and it was pretty tight. Actually I wanted to mount the pumps in the bays, and the bottom of the 250 rez's were kinda touching the fans on the rad, if fixed in the place I wanted them to be. Personally, I find the rig with the 150 version much more "breathing". There's plenty of space with those reservoirs, and they fit nicely in this not aligned position.

aka GK Haha lol! Well, nice to know the origins of my nick. Actually it's taken from a song from Massive Attack, called.... dobro Just changed the characters. And this signification pretty much sticks to my personnality.

Did you have to drill holes in the motherboard tray to take these?

I noticed my motherboard tray has a lot of holes in it already, but mine looks different to yours even though we have the same case :S

[lkiller123]

This is an awesome project Where did you get that EK TOP for your pump?

Is it this one?

[Mayek]

Did you have to drill holes in the motherboard tray to take these?

I noticed my motherboard tray has a lot of holes in it already, but mine looks different to yours even though we have the same case :S

Newer Lian Li cases have a revised version of motherboard trays, e.g. area behind CPU has one large rectangular hole instead of 4 smaller oval ones.
Nevertheless they still suck at cable organizing