X48 Rampage Formula Preview.

[Ghostleader]

Looking good, nice work

Have you done any P95 blend with max mem use yet?

[Chemjsal]

Looking good, nice work

Have you done any P95 blend with max mem use yet?

I'm running the default blend test with four threads while away. Will report back when I get home from work.

[Alien Grey]

I'm running the default blend test with four threads while away. Will report back when I get home from work.

Can you run some IntelBurnTest tests with CPU Clock Skew Delay 100ps and NB Clock Skew Delay 100ps to see if you can get it stable with these settings.

[Chemjsal]

Can you run some IntelBurnTest tests with CPU Clock Skew Delay 100ps and NB Clock Skew Delay 100ps to see if you can get it stable with these settings.

will do

____________________

Rampage Formula @0902, 4x2 GB G.Skill PC2-8800 (5-5-5-15, 2T) at 1.90V (PL7), Q9650 ES@4.19 GHz at 1.4125V (1.38V real, 1.30V load) on water, LLC disabled!, Asus 4870 TOP 512MB @880/1180 MHz on water, Dell 2405 FPW, Lian-Li PC-V2000 black

[Alien Grey]

will do

Thanks, I appreciate that.

I love this mobo too but I hate the BIOS.

[Chemjsal]

Can you run some IntelBurnTest tests with CPU Clock Skew Delay 100ps and NB Clock Skew Delay 100ps to see if you can get it stable with these settings.

I just ran IntelBurnTest 2.0 with the settings you asked but the entire OS (Win 7) froze after like 10 min. OOPS!

____________________

Rampage Formula @0902, 4x2GB G.Skill PC2-8800 (1117 MHz, 5-5-5-15, 2N) at 1.90V (PL7),
Q9650 ES@4.19 GHz (465x9) at 1.4125V (1.38V real, 1.30V load) on water, LLC disabled!,
Asus 4870 TOP 512MB @880/1180 MHz on water, Areca ARC-1210, ATI Theater 550 Pro, Dell 2405 FPW,
PC Power & Cooling Silencer 750W red, Lian-Li PC-V2000 black

[Alien Grey]

I just ran IntelBurnTest 2.0 with the settings you asked but the entire OS (Win 7) froze after like 10 min. OOPS!

OK, thanks for testing that out. It's just to see what happens with these Clock Skew settings.

[Ghostleader]

@ghostleader. My blend test crashed after four and a half hours. I used the settings in my first post. It's all right though. I'll try to up the nb voltage to 1.49V from 1.47V and do it again but this time under Mac OS X. Let's see what happens.

I just ran IntelBurnTest 2.0 with the settings you asked but the entire OS (Win 7) froze after like 10 min. OOPS!

You probably need to raise both FSB Term volt and NB volt to get it stable.

Have you tried any super pi 32M and/or looped 3DMark06 Canyon Flight to see if your stable?

[Chemjsal]

So, I raised the nb voltage to 1.49V and then I ran that blend test with 7 GB of memory. I used the 64bit version of macprime 259. As you can see, she's still going strong after like 8hr of priming.



I haven't tried any super pi 32M yet. But I have tried all kinds of other stuff, one of them being able to play Fallout 3 with everything cranked up to the max for long ass hours. Hope you like the pic

~talk to ya later
____________________

Rampage Formula @0902, 4x2GB G.Skill PC2-8800 (1117 MHz, 5-5-5-15, 2N) at 1.90V (PL7),
Q9650 ES@4.19 GHz (465x9) at 1.4125V (1.38V real, 1.30V load) on water, LLC disabled!,
Asus 4870 TOP 512MB @880/1180 MHz on water, Areca ARC-1210, ATI Theater 550 Pro, Dell 2405 FPW,
PC Power & Cooling Silencer 750W red, Lian-Li PC-V2000 black