pcb is just color....no difference
pcb is just color....no difference
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
is this the right ram?
http://www.newegg.com/Product/Produc...82E16820227419
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
Also remember that "LV" is in the product number![]()
i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
those are OCZ2B10664GK
you need: OCZ2B1066LV4GK
amd 940 @ 3.5ghz stock voltage or 3.7ghz 1,425v home made cpu block 3616 mhz and 2210mhz nb stable
gigabyte ga-ma790fx-dq6
sapphire hd4870 1gb @ 160-200 in idle , 750-950 load, with 2 rivatuner power profiles shortcuts.
2x 2GB OCZ Blade 8500 ddr2 1066 @ 1.85 volt
seagate barracuda 7200-11 1x500gb & 1x640gb (rip 1 500gb barracuda)
seagate barracuda 7200-12 1TB , very nice hd, 5 degree colder then the 640gb
windows xp 32
lian li pc-a70b
cooler master real power 850watt
What's le trick to getting my 8 GB reapers stable at DDR2 1100 5-5-5-15?
I'm on an ASUS P45 board at DDR2 1050, 5-5-5-15, vDDR @ 2.04v in BIOS, 100% memtest (HCI) stable. I'm also pushing 70 as the trfc value, PL8, AI twister @ moderate.
.:: Gaming PC Specs ::.
Case: Antec Nine Hundred
CPU: Intel Core i7-2600K @ 4.6 GHz, 1.44v (cooled by Xigmatek GAIA) [IntelBurnTest{Linpack} stable]
GPU/Monitor: VisionTek HD 6950 @ 6970, 950 MHz/1375 MHz 1.30v + Sony BRAVIA 32EX400 1080p
Motherboard: GIGABYTE Z68XP-UD4 F5
Memory: 16 GB (4x 4 GB) Corsair Vengeance LP DDR3 1600
Hard Drive: 2x Seagate 500 GB 7200.11 RAID 0 & RAID 1 (Matrix RAID) + 1x WD Caviar Black 640 GB
Sound: Creative SB X-Fi Fatal1ty Profess1onal, Logitech X-530
PSU: Corsair AX-1200 (1500W PSU!)
O/S: Microsoft® Windows 7 Ultimate SP1 X64
Whats the chance of Blade LV PC2 9600s hitting DDR1333 6-6-6-18 on a Gigabyte EP45-UD3P?
--lapped Q9650 #L828A446 @ 4.608, 1.45V bios, 1.425V load.
-- NH-D14 2x Delta AFB1212SHE push/pull and 110 cfm fan -- Coollaboratory Liquid PRO
-- Gigabyte EP45-UD3P ( F10 ) - G.Skill 4x2Gb 9600 PI @ 1221 5-5-5-15, PL8, 2.1V
- GTX 480 ( 875/1750/928)
- HAF 932 - Antec TPQ 1200 -- Crucial C300 128Gbboot --
Primary Monitor - Samsung T260
You'd be better of running DDR1200 5-5-5.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Bookmarks