** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[fatguy1992]

Anyone want Q6600 settings? let me know Heres my stable 4.05GHz settings I have, 3.0GHz, 3.2GHz, 3.6GHz, 4.0GHz and 4.2GHz settings all stable.

******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto     ] 
CPU Clock Ratio.................................[ 9        ] 
Fine CPU Clock Ratio............................[ 0        ] 
CPU Frequency 4.05GHz...........................[ 450 x 9  ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled  ] 
CPU Host Frequency (Mhz)........................[ 450      ] 
PCI Express Frequency (Mhz).....................[ 100      ] 
C.I.A 2 [Disabled] 

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv   ] 
PCI Express Clock Drive.........................[ 900mv   ] 
CPU Clock Skew..................................[ 0ps     ] 
MCH Clock Skew..................................[ 0ps     ] 

******DRAM Performance Control******

Performance Enhance [Standard] 
Extreme Memory Profile (XMP)....................[ Auto ] 
(G) MCH Frequency Latch.........................[ 400MHz ]
System Memory Multipler.........................[ 2.00D  ] 
Memory Frequency 1066...........................[ 900MHz ] 
DRAM Timing Selectable..........................[ Manual ] 

CAS Latency Time................................[ 5        ] 
tRCD............................................[ 4        ] 
tRP.............................................[ 4        ] 
tRAS............................................[ 15       ] 

******Advanced Timing Control******

tRRD............................................[ Auto     ] 
tWTR............................................[ Auto     ] 
tWR.............................................[ Auto     ] 
tRFC............................................[ Auto     ] 
tRTP............................................[ Auto     ] 
Command Rate (cmd)..............................[ 2     ] 

******Channel A Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel A Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Channel B Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel B Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz  ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.25000 ]...................[ 1.3625  ] 
CPU Termination   [ 1.20    ]...................[ 1.28   ]
CPU PLL           [ 1.50    ]...................[ 1.500  ]
CPU Reference     [ 0.766   ]...................[ I can't remember the number, but its 2 steps up from default   ]

MCH Core          [1.1      ]...................[ 1.3  ]  
MCH Reference     [0.760    ]...................[ I can't remember the number, but its 1 step down from default  ] 
MCH/DRAM Refernce [0.900    ]...................[ 1.000 ] 
ICH I/O           [1.500    ]...................[ 1.500  ] 
ICH Core          [1.100    ]...................[ 1.100  ] 

DRAM Voltage      [1.800    ]...................[ 2.000    ] 
DRAM Termination  [0.900    ]...................[ 1.000   ] 
Channel A Ref     [0.900    ]...................[ 1.000  ] 
Channel B Ref     [0.900    ]...................[ 1.000  ]  

******Advanced BIOS Features******

CPU Multithreading..............................[ Enabled ] 
Limit CPUID Max to 3............................[ Disabled ] 
No-Execute memory Protect.......................[ Disabled ]  
CPU Enhance Halt (CIE)..........................[ Disabled ]  
C2/C2E State Support............................[ Disabled ]  
C4/C4E State Support............................[ Disabled ] 
CPU Thermal Monitor.............................[ Disabled ] 
CPU EIST Function...............................[ Disabled ] 
Virtualization Technology.......................[ Disabled ]

[Homeless2]

Anyone want Q6600 settings? let me know Heres my stable 4.05GHz settings I have, 3.0GHz, 3.2GHz, 3.6GHz, 4.0GHz and 4.2GHz settings all stable.

******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto     ] 
CPU Clock Ratio.................................[ 9        ] 
Fine CPU Clock Ratio............................[ 0        ] 
CPU Frequency 4.05GHz...........................[ 450 x 9  ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled  ] 
CPU Host Frequency (Mhz)........................[ 450      ] 
PCI Express Frequency (Mhz).....................[ 100      ] 
C.I.A 2 [Disabled] 

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv   ] 
PCI Express Clock Drive.........................[ 900mv   ] 
CPU Clock Skew..................................[ 0ps     ] 
MCH Clock Skew..................................[ 0ps     ] 

******DRAM Performance Control******

Performance Enhance [Standard] 
Extreme Memory Profile (XMP)....................[ Auto ] 
(G) MCH Frequency Latch.........................[ 400MHz ]
System Memory Multipler.........................[ 2.00D  ] 
Memory Frequency 1066...........................[ 900MHz ] 
DRAM Timing Selectable..........................[ Manual ] 

CAS Latency Time................................[ 5        ] 
tRCD............................................[ 4        ] 
tRP.............................................[ 4        ] 
tRAS............................................[ 15       ] 

******Advanced Timing Control******

tRRD............................................[ Auto     ] 
tWTR............................................[ Auto     ] 
tWR.............................................[ Auto     ] 
tRFC............................................[ Auto     ] 
tRTP............................................[ Auto     ] 
Command Rate (cmd)..............................[ 2     ] 

******Channel A Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel A Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Channel B Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel B Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz  ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.25000 ]...................[ 1.3625  ] 
CPU Termination   [ 1.20    ]...................[ 1.28   ]
CPU PLL           [ 1.50    ]...................[ 1.500  ]
CPU Reference     [ 0.766   ]...................[ I can't remember the number, but its 2 steps up from default   ]

MCH Core          [1.1      ]...................[ 1.3  ]  
MCH Reference     [0.760    ]...................[ I can't remember the number, but its 1 step down from default  ] 
MCH/DRAM Refernce [0.900    ]...................[ 1.000 ] 
ICH I/O           [1.500    ]...................[ 1.500  ] 
ICH Core          [1.100    ]...................[ 1.100  ] 

DRAM Voltage      [1.800    ]...................[ 2.000    ] 
DRAM Termination  [0.900    ]...................[ 1.000   ] 
Channel A Ref     [0.900    ]...................[ 1.000  ] 
Channel B Ref     [0.900    ]...................[ 1.000  ]  

******Advanced BIOS Features******

CPU Multithreading..............................[ Enabled ] 
Limit CPUID Max to 3............................[ Disabled ] 
No-Execute memory Protect.......................[ Disabled ]  
CPU Enhance Halt (CIE)..........................[ Disabled ]  
C2/C2E State Support............................[ Disabled ]  
C4/C4E State Support............................[ Disabled ] 
CPU Thermal Monitor.............................[ Disabled ] 
CPU EIST Function...............................[ Disabled ] 
Virtualization Technology.......................[ Disabled ]

3.6 settings would be appreciated with your reference values. Hopefully they'll help my 1.3125 VID chip :[

[fatguy1992]

3.6 settings would be appreciated with your reference values. Hopefully they'll help my 1.3125 VID chip :[

No problem, just two questions, what cooling are you using? and how much RAM are you using?

Thanks

Anyway heres what I recommend, but it might change a bit once I know the answer to those two questions.

******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto     ] 
CPU Clock Ratio.................................[ 9        ] 
Fine CPU Clock Ratio............................[ 0        ] 
CPU Frequency 4.05GHz...........................[ 400 x 9  ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled  ] 
CPU Host Frequency (Mhz)........................[ 400      ] 
PCI Express Frequency (Mhz).....................[ 100      ] 
C.I.A 2 [Disabled] 

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv   ] 
PCI Express Clock Drive.........................[ 900mv   ] 
CPU Clock Skew..................................[ 0ps     ] 
MCH Clock Skew..................................[ 0ps     ] 

******DRAM Performance Control******

Performance Enhance [Standard] 
Extreme Memory Profile (XMP)....................[ Auto ] 
(G) MCH Frequency Latch.........................[ 400MHz ]
System Memory Multipler.........................[ 2.66D  ] 
Memory Frequency 1066...........................[ 1066MHz ] 
DRAM Timing Selectable..........................[ Manual ] 

CAS Latency Time................................[ 5        ] 
tRCD............................................[ 5        ] 
tRP.............................................[ 5        ] 
tRAS............................................[ 15       ] 

******Advanced Timing Control******

tRRD............................................[ Auto     ] 
tWTR............................................[ Auto     ] 
tWR.............................................[ Auto     ] 
tRFC............................................[ Auto     ] 
tRTP............................................[ Auto     ] 
Command Rate (cmd)..............................[ 2     ] 

******Channel A Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel A Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Channel B Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel B Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz  ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.25000 ]...................[ 1.500  ] - I only use 1.2vcore - if stable then lower until it becomes unstable  
CPU Termination   [ 1.20    ]...................[ 1.30   ] - I only use 1.2v - if stable lower until it becomes unstable 
CPU PLL           [ 1.50    ]...................[ 1.500  ]
CPU Reference     [ 0.760   ]...................[ I can't remember the number, but its 2 steps up from default   ]

MCH Core          [1.1      ]...................[ 1.2  ]  
MCH Reference     [0.760    ]...................[ I can't remember the number, but its 1 step down from default  ] 
MCH/DRAM Refernce [0.900    ]...................[ 50% Of the RAM Voltage ] 
ICH I/O           [1.500    ]...................[ 1.500  ] 
ICH Core          [1.100    ]...................[ 1.100  ] 

DRAM Voltage      [1.800    ]...................[ Whatever your RAM needs    ] 
DRAM Termination  [0.900    ]...................[ 50% Of the RAM Voltage   ] 
Channel A Ref     [0.900    ]...................[ 50% Of the RAM Voltage  ] 
Channel B Ref     [0.900    ]...................[ 50% Of the RAM Voltage  ]  

******Advanced BIOS Features******

CPU Multithreading..............................[ Enabled ] 
Limit CPUID Max to 3............................[ Disabled ] 
No-Execute memory Protect.......................[ Disabled ]  
CPU Enhance Halt (CIE)..........................[ Disabled ]  
C2/C2E State Support............................[ Disabled ]  
C4/C4E State Support............................[ Disabled ] 
CPU Thermal Monitor.............................[ Disabled ] 
CPU EIST Function...............................[ Disabled ] 
Virtualization Technology.......................[ Disabled ]

So pretty much what you do for the References is, set your CPU Termination to 1.2v (stock) then set both the CPU and MCH references to 0.760. Then increase the CPU Reference by to steps (with the + key on the num pad), and lower the MCH Reference the same way.

Also if this doesn't work try different BIOSes, they can make a massive difference.

PS. sorry for the late response.

[yogi7272]

Anyone want Q6600 settings? let me know Heres my stable 4.05GHz settings I have, 3.0GHz, 3.2GHz, 3.6GHz, 4.0GHz and 4.2GHz settings all stable.

******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto     ] 
CPU Clock Ratio.................................[ 9        ] 
Fine CPU Clock Ratio............................[ 0        ] 
CPU Frequency 4.05GHz...........................[ 450 x 9  ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled  ] 
CPU Host Frequency (Mhz)........................[ 450      ] 
PCI Express Frequency (Mhz).....................[ 100      ] 
C.I.A 2 [Disabled] 

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv   ] 
PCI Express Clock Drive.........................[ 900mv   ] 
CPU Clock Skew..................................[ 0ps     ] 
MCH Clock Skew..................................[ 0ps     ] 

******DRAM Performance Control******

Performance Enhance [Standard] 
Extreme Memory Profile (XMP)....................[ Auto ] 
(G) MCH Frequency Latch.........................[ 400MHz ]
System Memory Multipler.........................[ 2.00D  ] 
Memory Frequency 1066...........................[ 900MHz ] 
DRAM Timing Selectable..........................[ Manual ] 

CAS Latency Time................................[ 5        ] 
tRCD............................................[ 4        ] 
tRP.............................................[ 4        ] 
tRAS............................................[ 15       ] 

******Advanced Timing Control******

tRRD............................................[ Auto     ] 
tWTR............................................[ Auto     ] 
tWR.............................................[ Auto     ] 
tRFC............................................[ Auto     ] 
tRTP............................................[ Auto     ] 
Command Rate (cmd)..............................[ 2     ] 

******Channel A Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel A Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Channel B Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel B Driving Settings****** 

Drive Strength Profile..........................[ 1066MHz  ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.25000 ]...................[ 1.3625  ] 
CPU Termination   [ 1.20    ]...................[ 1.28   ]
CPU PLL           [ 1.50    ]...................[ 1.500  ]
CPU Reference     [ 0.766   ]...................[ I can't remember the number, but its 2 steps up from default   ]

MCH Core          [1.1      ]...................[ 1.3  ]  
MCH Reference     [0.760    ]...................[ I can't remember the number, but its 1 step down from default  ] 
MCH/DRAM Refernce [0.900    ]...................[ 1.000 ] 
ICH I/O           [1.500    ]...................[ 1.500  ] 
ICH Core          [1.100    ]...................[ 1.100  ] 

DRAM Voltage      [1.800    ]...................[ 2.000    ] 
DRAM Termination  [0.900    ]...................[ 1.000   ] 
Channel A Ref     [0.900    ]...................[ 1.000  ] 
Channel B Ref     [0.900    ]...................[ 1.000  ]  

******Advanced BIOS Features******

CPU Multithreading..............................[ Enabled ] 
Limit CPUID Max to 3............................[ Disabled ] 
No-Execute memory Protect.......................[ Disabled ]  
CPU Enhance Halt (CIE)..........................[ Disabled ]  
C2/C2E State Support............................[ Disabled ]  
C4/C4E State Support............................[ Disabled ] 
CPU Thermal Monitor.............................[ Disabled ] 
CPU EIST Function...............................[ Disabled ] 
Virtualization Technology.......................[ Disabled ]

Can u post ur 3.6ghz and 4.0 ghz settings as well for q6600? I hope you still have them

[yogi7272]

Ok. Been able to clock q6600@3.6 ghz with ram@800 mhz -9x400 fsb 1:1 .My ram is pretty ordinary one- transcend 800mhz cl5.. I think max this ram can do is 900-950 mhz with loose timings.