DFI 790FX-M2R +955 worky just fine ;-)

**-n7-** · 05-09-2009, 08:02 AM

Holy wow...they is some amazing stuff.

**radaja** · 05-09-2009, 08:02 AM

i found my next 2x2GB kit's of ram!

**johnysb** · 05-09-2009, 08:52 AM

nice clocks @ verry low voltage,but i have to see what this kit can do on an intel chipset,in order to decide if it's gonna be my next one

**cdawall** · 05-09-2009, 09:32 AM

Originally Posted by Tony

1600 6-6-6-24 1T was easy...will see how they do at 1700 next.

my Crucial Value can pull off 1700 CL 6-6-6-18 what voltage do the blades take for 1600?

and good runs on the DDR2 keeps up with my old school Corsair dominator C3D's but at a lot lower volts

**Smartidiot89** · 05-09-2009, 09:42 AM

Originally Posted by johnysb

nice clocks @ verry low voltage,but i have to see what this kit can do on an intel chipset,in order to decide if it's gonna be my next one

Tony said earlier in this thread these sticks worked better for Intel (P45) then for AMD Phenom II for high clocks

**Tom128** · 05-09-2009, 10:17 AM

Hmmmmmm so I am going to build an HTPC pretty soon. I may put my DOMINATORS into my HTPC and buy some of this instead of buying the cheapest DDR2 I could find for it. Dominators in an HTPC FTW! Seriously that ram is epic. I was thinking of getting an AM3 board and moving my AM2+ into the HTPC but these sticks are just amazing looking.

**Zeus** · 05-09-2009, 10:37 AM

DDR1000 4-4-4-12 @1.86V, have to try more but ran out of time today.

I have a feeling DDR1100 4-4-4 is on the cards.

**-= rtz =-** · 05-09-2009, 10:56 AM

Originally Posted by Tony

You know guys I have been testing other SB600 boards with these new blade dimms and 955, and NOTHING is as good as this old DFI board,

Hi Tony, was one of these boards the gigabyte MA790FX-DQ6 by any chance?

**-n7-** · 05-09-2009, 10:58 AM

Originally Posted by Zeus

I have a feeling DDR1100 4-4-4 is on the cards.

I have a feeling that's unlikely, but i wish you good luck.

This is some impressive RAM based on how well it does without much vDIMM.

**Smartidiot89** · 05-09-2009, 10:58 AM

Originally Posted by -n7-

I have a feeling that's unlikely, but i wish you good luck.

This is some impressive RAM based on how well it does without much vDIMM.

DDR1000 4-4-4 seems possible, so another 100mhz and running 1.9v+ could do something?

**18 is # 1** · 05-09-2009, 11:31 AM

These are the lower voltage Blades you were using Tony, correct? http://www.ocztechnology.com/product...e_blade_series

P.S. Thanks -n7- for the heads up!

**~~proxis~~** · 05-09-2009, 01:47 PM

Is same freq possible with Intel chipset too?

**tool_462** · 05-09-2009, 01:56 PM

Originally Posted by proxis

Is same freq possible with Intel chipset too?

If you read the last ~8 posts you will learn that HIGHER frequencies are possible on Intel chipsets

**Tony** · 05-09-2009, 02:34 PM

Originally Posted by -= rtz =-

Hi Tony, was one of these boards the gigabyte MA790FX-DQ6 by any chance?

Yes...4 hrs and pulled it back out...then sat on it by mistake and bent it.

probably dead now...have to get OCZ to send another

**Tony** · 05-11-2009, 12:32 PM

Can you beat me fully stable?

Check the pics..and remember this is 8GB of DDR2 @1066

**cdawall** · 05-11-2009, 01:36 PM

Originally Posted by Tony

Can you beat me fully stable?

Check the pics..and remember this is 8GB of DDR2 @1066

http://dl.getdropbox.com/u/920660/3....ltage_1066.png
http://dl.getdropbox.com/u/920660/tn_Image21.jpg

my chip can do the same

good to see most chips can pull this off

**Tony** · 05-11-2009, 02:25 PM

Originally Posted by cdawall

my chip can do the same

good to see most chips can pull this off

Lets see it then

**lopri** · 05-11-2009, 05:02 PM

Where can I buy these sticks?

**radaja** · 05-11-2009, 05:42 PM

where and when?

**Brother Esau** · 05-11-2009, 05:57 PM

Interesting Vanity Tattoo

**cdawall** · 05-11-2009, 07:17 PM

Originally Posted by Tony

Lets see it then

i have DDR3 is that still fair?

**Tony** · 05-11-2009, 11:47 PM

Originally Posted by cdawall

i have DDR3 is that still fair?

NO LOL...im pushing ddr2 1066 with 1.65v and you want to compare against DDR3 ....LOL

**MusicIsMyLife** · 05-12-2009, 01:10 AM

Originally Posted by Tony

Can you beat me fully stable?

Check the pics..and remember this is 8GB of DDR2 @1066

http://dl.getdropbox.com/u/920660/3....ltage_1066.png

Damn, that's a crazy achievement...

Originally Posted by Tony

Nearly one and a half year since I reviewed SAPPHIRE PURE CrossFireX PC-AM2RD790 and still nobody fixed this

voltage <-> vlotage

issue...

**Balb0wa** · 05-12-2009, 01:26 AM

ocuk have these in now £50.99

http://www.overclockers.co.uk/showpr...odid=MY-168-OC

**Tony** · 05-12-2009, 01:38 AM

Originally Posted by Balb0wa

ocuk have these in now £50.99

http://www.overclockers.co.uk/showpr...odid=MY-168-OC

About time

best DDr2 i have ever tested, even better than the old micron d9 and the uber PSC we used to use on the Reaper X.

plug and play 1066...we just need the motherboard manufacturers to offer sub 1.95V at auto now as these modules just don't need it.

Thread: DFI 790FX-M2R +955 worky just fine ;-)

Thread Tools

Search Thread

Rate This Thread

Display

Low voltage challenge...3.6GHZ and 1066ram

Bookmarks

Bookmarks

Posting Permissions