** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[coop]

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 9 
Fine CPU Clock Ratio...................: 0.5
CPU Frequency .........................: 4.902GHz (516X9.5)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 516 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: 800
PCI Express Clock Drive................: 1000
CPU Clock Skew (ps)....................: 50ps 
MCH Clock Skew (ps)....................: 100ps 

DRAM Performance Control

Performance Enhance....................: Turbo
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: 333MHz 
System Memory Multiplier ..............: 2.40D 
Memory Frequency (Mhz) ................: 1238MHz

DRAM Timing Selectable ................: Manual 

Standard Timing Control

CAS Latency Time.......................: 5 
tRCD ..................................: 5 
tRP'...................................: 5 
tRAS...................................: 15 

Advanced Timing Control

Everything In Advanced Timing Control on auto. 
but tRFC 56 and Drive Strength Profiles OC-1200
DDR Write Training: Disable
Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Disabled] 
CPU Vcore..............................: 1.45V
CPU Termination........................: 1.38V
CPU PLL................................: 1.61V
CPU Reference..........................: 0.914  

MCH/ICH

MCH Core...............................: 1.40V  
Reference..............................: 0.794
MCH/DRAM Ref...........................: 1.12v
ICH I/O................................: 1.5V 
ICH Core...............................: 1.100V 

DRAM
DRAM Voltage...........................: 2.26v
DRAM Termination ......................: Auto 
Channel A Reference....................: Auto
Channel B Reference ...................: Auto

I did not notice post count.

[DOM.]

heres 4.7ghz, its down the thread i bit, some of the voltages r overkill like mch core, and main thing that helps the high fsb for me is the vtt and mch ref u may need for vcore tho wasnt that stable
http://www.xtremesystems.org/forums/...d.php?t=211385
also if u look through the first 20-40 (i dont really know where it is up its there some where) of this thread i have settings for 4.6ghz that were very stable, it may also help

thanks but didnt seem to work might just be this Q max its a C1 i was thinking of RMAing it to see if i could get a E0 lol

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 9 
Fine CPU Clock Ratio...................: 0.5
CPU Frequency .........................: 4.902GHz (516X9.5)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 516 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: 800
PCI Express Clock Drive................: 1000
CPU Clock Skew (ps)....................: 50ps 
MCH Clock Skew (ps)....................: 100ps 

DRAM Performance Control

Performance Enhance....................: Turbo
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: 333MHz 
System Memory Multiplier ..............: 2.40D 
Memory Frequency (Mhz) ................: 1238MHz

DRAM Timing Selectable ................: Manual 

Standard Timing Control

CAS Latency Time.......................: 5 
tRCD ..................................: 5 
tRP'...................................: 5 
tRAS...................................: 15 

Advanced Timing Control

Everything In Advanced Timing Control on auto. 
but tRFC 56 and Drive Strength Profiles OC-1200
DDR Write Training: Disable
Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Disabled] 
CPU Vcore..............................: 1.45V
CPU Termination........................: 1.38V
CPU PLL................................: 1.61V
CPU Reference..........................: 0.914  

MCH/ICH

MCH Core...............................: 1.40V  
Reference..............................: 0.794
MCH/DRAM Ref...........................: 1.12v
ICH I/O................................: 1.5V 
ICH Core...............................: 1.100V 

DRAM
DRAM Voltage...........................: 2.26v
DRAM Termination ......................: Auto 
Channel A Reference....................: Auto
Channel B Reference ...................: Auto

I did not notice post count.

Thanks hope i can get more out of my E8500 then with the other settings i got from you 5320 was the highest