Quote Originally Posted by A-Grey View Post
I fired up MemTest86+ V2.11 again and it failed Test 5 after 4 passes.

I'm running Test 5 alone now because it's the only test that it fails after some time.

I'm currently using 1.90V for DDR 1239MHz and that looks to be solving the problem. I changed it in the BIOS settings that I posted earlier.

I'll let it run for some time to be sure that the Memory is error free before I move back again to Linx.
I wonder why you keep them so low on voltage, maybe you could try to raise voltage up 2.2v?