After a few months of working with my chip and ram, this is what I have settled on. I had to run 2.0D strap because no matter what I did the 2.4B strap ended up being total garbage.
OCCT and Prime95 stable.
After a few months of working with my chip and ram, this is what I have settled on. I had to run 2.0D strap because no matter what I did the 2.4B strap ended up being total garbage.
OCCT and Prime95 stable.
Q9650@4.25ghz 500x8.5 1.37v
Gigabyte GA-EP45-UD3P - F9B
Gskill PI PC2-8800 4gb 1000mhz 55ns 1.92v
WD Caviar Black 640gb/Kingston HyperX 8gb 0.7ms Access Storage
Patriot XporterXt 32gb 0.8ms Access Storage
Sapphire HD 3870 512mb
Zalman 750watt PSU
NZXT Tempest with 5x120mm+2x140mm
Sunbeam "Core Contact"/Scythe "Slipstream" 110cfm/
IC Diamond
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Hello Fellow members. I just bought HD Camcorder and in desperate need to accelerate rending times. I have Abit IP35 PRO motherboard currently with E8400 OC to 3.6ghz. How does Q9650 OC/perform on this motherboard? Can anyone comment? Thank you, im so ready to pull the trigger but need to know what clocks people are getting with this motherboard since i can't afford another motherboard at the moment. Also if people who use Vegas pro, are you seeing a good difference in performance? Thank you!
Intel E8400
Abit P35PRO 1.1
G.SKILL 4GB(2 x 2GB) DDR2 1000
EVGA 8800GTS (92)
RAID0 W / 2x 500GB 720011 Seagate 32mb OC to 10K RPM
* All WATER cooled by the Best there is*
Antec P180
Got you on my hard drive OC
Bookmarks