***955 Unleashed***

[chew*]

No go with whatever BIOS I try....

Could somebody be so nice as to post the default M.I.T. values for this CPU so I can take it from there? (MIT just says default=normal, not default=x.xxV...)

Pleasepleasepleasepleaseplease...??

EDIT: I just noticed that Chew's T1 BIOS actually has the same release date as the official F3 release... I wonder if there is an F4 coming soon...

EDIT2: Here's the values so far. Please, correct them in case they're wrong.

CPU Clock Ratio: x16 (3200 MHz)
CPU Northbridge Freq.: x10 (2000 MHz)
CPU Freq.: 200 MHz
PCIe Clock: 100 MHz
HT Link Freq.: x10 (2000 MHz)

Memory settings skipped

DDR 2 Voltage: 1.8 V ??? (seeing that CCR VTT is 0.9V)
SB/HT Voltage: ??? (Available settings are: Normal, +0.1, +0.2, +0.3)
NB/PCIe/PLL Voltage: ??? (Available settings are: Normal, +0.1, +0.2, +0.3)
CPU PLL Voltage: 2.5V (as given by the BIOS)
DDR VTT: 0.9V (as given by the BIOS)
NB Voltage: 1.1V (as given by the BIOS)
CPU VID: 1.35V ??? (According to Chew's screenies, though CPUZ in some cases says 1.45V...?)

Make sure when you flash you disconect power after the flash, remove battery, and jump clear cmos...........I only trust the clr cmos button for clring my settings.....on the same bios...

F3 is most likely T1 if the release dates are the same.....

Come to think of it I now remember I had the same problem......with the shipped bios........I am going to email gigabyte and have them remove a few unsafe things and get the T1 out........please be patient not sure how soon they will get back to me........