Give a link to the set for info on timings and voltages...Originally Posted by Racpu_
Try these settings in bios...
Give a link to the set for info on timings and voltages...
Try these settings in bios...
Last edited by keenan; 03-22-2009 at 11:10 AM.
Intel Core i5 750 @ 4.3Ghz H2O
Gigabyte P55M-UD2
Sapphire HD4890 Vapor-X @ 950/4800
2 x 2GB Ripjaw PC16000 @ 9-9-9-24-1T
2 x 250 WD Raid
OCZ StealthXtreme 600W
It could be your sticks 1.6v seems abit low for 1600Mhz at 8-8-8-24 1T! Have you try 1.7/1.8
I had a similar problem with Vista 64 going down when I unlocked the 4th core but after a reinstall I can boot to Vista 64, W7 or XP with no issues and running a 1600MHZ 7-7-7-21-29 1T.
Hope you find a solution.
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
Has anyone had there memory over 1680Mhz with this board in bios! Seems to be my limit on this board! I know my sticks can do 2100Mhz on intel boards thou!
what chips do they use?
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Click - Info in the Specs
Also found the same info elsewhere, but cannot find it now, lol.
New Rig☺
► AMD 720BE @ 3.2GHz Stable
► Corsair 4gb DDR3 Twin3X
► Gigabyte A-MA790FXT-UD5P
► Radeon HD 4870 1024MB GDDR5
► Corsair HX 620W
► Western Digital Caviar BE
► Sunbeam Core Contact Freezer
► Samsung T240 HD 24" LCD (x2 Soon)
Old Rig
● DFI Lanparty nf4 SLI-DR
● AMD Opteron 146 (CACJE) @ 2.6Ghz (Now @ 2.2Ghz for Stability
● 1GB TwinMOS -bh5 @ 260MHz (Now @ 220Mhz for Stability)
● 2 x 120gb WD SE HDD's - IDE
● 2 x Pioneer 109 DVD-R/W - IDE
● Hiper Type R PSU - 580w
● 128mb MSI ATI GFX
● Will be cooled by Mach II when it's fixed.
Ooops, sorry, just realised that spec request wasn't for me, lol
New Rig☺
► AMD 720BE @ 3.2GHz Stable
► Corsair 4gb DDR3 Twin3X
► Gigabyte A-MA790FXT-UD5P
► Radeon HD 4870 1024MB GDDR5
► Corsair HX 620W
► Western Digital Caviar BE
► Sunbeam Core Contact Freezer
► Samsung T240 HD 24" LCD (x2 Soon)
Old Rig
● DFI Lanparty nf4 SLI-DR
● AMD Opteron 146 (CACJE) @ 2.6Ghz (Now @ 2.2Ghz for Stability
● 1GB TwinMOS -bh5 @ 260MHz (Now @ 220Mhz for Stability)
● 2 x 120gb WD SE HDD's - IDE
● 2 x Pioneer 109 DVD-R/W - IDE
● Hiper Type R PSU - 580w
● 128mb MSI ATI GFX
● Will be cooled by Mach II when it's fixed.
Samsung K4B1G0846D-HCF8
I Try this settings, and it was ok ... placing the 3700 is no longer stable, but try more Mhz's only just up the CPU Voltage Control or need to change anything else?
Thanks for the settings.
Bank Swizzle Mode, DQS Training control ....whats the scope on those two?
From my research, Bank Swizzle should increase the bandwidth when enabled ( I didnt notice anything) and DQS control when enabled should help to stabilize when pushing RAM too hard.
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
Just up the voltage... try 1.55V for 3.7GhzI Try this settings, and it was ok ... placing the 3700 is no longer stable, but try more Mhz's only just up the CPU Voltage Control or need to change anything else?
Thanks for the settings.
Intel Core i5 750 @ 4.3Ghz H2O
Gigabyte P55M-UD2
Sapphire HD4890 Vapor-X @ 950/4800
2 x 2GB Ripjaw PC16000 @ 9-9-9-24-1T
2 x 250 WD Raid
OCZ StealthXtreme 600W
Ok, What is the maximum voltage use 24/7 and the temperature?
What's the recommended Bios for this board F4 or F3l?
Seems we made our greatest error when we named it at the start
for though we called it "Human Nature" - it was cancer of the heart
CPU: AMD X3 720BE@ 3,4Ghz
Cooler: Xigmatek S1283(Terrible mounting system for AM2/3)
Motherboard: Gigabyte 790FXT-UD5P(F4) RAM: 2x 2GB OCZ DDR3 1600Mhz Gold 8-8-8-24
GPU:HD5850 1GB
PSU: Seasonic M12D 750W Case: Coolermaster HAF932(aka Dusty)
I use F3l...
f4g
New Rig☺
► AMD 720BE @ 3.2GHz Stable
► Corsair 4gb DDR3 Twin3X
► Gigabyte A-MA790FXT-UD5P
► Radeon HD 4870 1024MB GDDR5
► Corsair HX 620W
► Western Digital Caviar BE
► Sunbeam Core Contact Freezer
► Samsung T240 HD 24" LCD (x2 Soon)
Old Rig
● DFI Lanparty nf4 SLI-DR
● AMD Opteron 146 (CACJE) @ 2.6Ghz (Now @ 2.2Ghz for Stability
● 1GB TwinMOS -bh5 @ 260MHz (Now @ 220Mhz for Stability)
● 2 x 120gb WD SE HDD's - IDE
● 2 x Pioneer 109 DVD-R/W - IDE
● Hiper Type R PSU - 580w
● 128mb MSI ATI GFX
● Will be cooled by Mach II when it's fixed.
Had say F3i Lastest and offical by Gigabyte!
I have 4GB(2x2GB) of Patriot Viper rated to run at 1600mhz, 7-7-7-20 with 1.9v. These modules are supposed to be compatible with UD5P according to Gigabyte, yet they cannot run at rated speed and timing.
I've tried 4 bioses that have been available at Gigabyte site, but none of them worked with these modules.
Any ideas?
Intel® Core™ i7 920@200x21=4.2Ghz w/1.312v HT on
Asus P6TD Deluxe
H2O by Petra's Tech CoolKit Elite Rev.2 w/D-TEK FuZion V2
EVGA GTX 580
OCZ3P1600LV6GK 7-7-7-24-1T 6GB
OCZ Vertex 2 50Gb in Raid-0
Super Talent UltraDriveGX 128Gb
WD VelociRaptor 300
Corsair HX850W
Windows 7 Professional 64
AMD Phenom™ II X6 1090T BE @ 4131Mhz(243x17)
Asus Crosshair IV Formula
Am in the same boat mate! I guess with newer bios coming out they will fix the issues!
I am back to F4d bios. Tried them all. The Patriot 34G1600LLK I'm using has occasional issues at 7-7-7-20/1.9v It will run games but fails OCCT after 7-15 minutes. Called Patriot and they said just set the 7-7-7-20 and leave the rest timings alone. SPD is "supposed" to be 7-7-7-20-36-2T but runs stable during OCCT at 7-7-7-20-26-2T. So this is what's running now-3.4Ghz (200 x 17) +0.050v
Edit: I can game all night on settings that wouldn't last 5 minutes of OCCT.
Last edited by PaganII; 03-23-2009 at 08:36 AM.
Has anyone managed to get the new T1 Beta Bios
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Yeah I call that VERY good. :-)
Any news on the bios?
Guys, is there any point to OCing the HT link? I dont notice anything between 2000 and 2600...at least not on CPU or memories tests. With the NB Ocing the difference is obvious.
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
try with 2 4870x2 start @ 1600 onwards youll see the gain but you wont notice no performance difference if your setup is not starved for bandwidth at any giving speed
also im trying to see if they can crank out a very mem friendly bios
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
So if my GTX280 needs more bandwitdh then thats where I will see the difference...I see. Well, its cool to have it so high anyway. :-)
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
I'm having problem with my UD5P holding on to the overclocked setting when I cold boot. Everytime I cold boot my system it reports that my overclocked bios setting is not stable even though the system passes both 2 hours of OCCT and 3 hours of Prime95 under Vista64. I have F3b and set FSB to 250mhz. What am I doing wrong?
Last edited by mngdew; 03-24-2009 at 09:56 PM.
Intel® Core™ i7 920@200x21=4.2Ghz w/1.312v HT on
Asus P6TD Deluxe
H2O by Petra's Tech CoolKit Elite Rev.2 w/D-TEK FuZion V2
EVGA GTX 580
OCZ3P1600LV6GK 7-7-7-24-1T 6GB
OCZ Vertex 2 50Gb in Raid-0
Super Talent UltraDriveGX 128Gb
WD VelociRaptor 300
Corsair HX850W
Windows 7 Professional 64
AMD Phenom™ II X6 1090T BE @ 4131Mhz(243x17)
Asus Crosshair IV Formula
Posting Permissions
Reply With Quote
Bookmarks