Quote Originally Posted by Trigger5521 View Post
If you go compression fittings don't make the same mistake I made, 1/2 tygon tubing compression fittings will not fit on D-Tek EK-NB or EK-SB. They MAY work on that new single block by bitspower(dbl check). I wish that was out when I was building my water setup, it's a cleaner look, less tubing to deal with. Sangrak, let me know if I can help...I owe you
1/2 Tygon tubing is ok, thats what Im going to use. I also spent hours figuring out what would work and what not.
It works with 1/2ID 3/4 OD compression fittings on all mosfet blocks and works with no problem on the Bitspower Black Freezer. The only thing that would NOT work (no space for the two comp. fittings) are the EK blocks for NB and SB (the threads are too close to each other) and also the D-Tek Fuzion V2.

Since Im not using the EK blocks that was no problem, Bitspower made sure that they were compatible with the black freezer. Now, for the D-Tek, I had no option but to use standard fittings. Then, around november I believe, Bitspower released this 45 angled fittings and that solved my problem. Only thing I have to do is point the 45 angled fitting vertically so the comp fittings dont interfere with each other.

Hope this helps