Teasing Warning!![]()
Teasing Warning!![]()
PHII-3800mhz-2500mhzHT,1500W(dual750Pcpower&cooling)silverstone TJ07, dualrad120MM,4870CF, MushkinPC9200-1200mhz5-5-5-15
I got water, just testing the baby
It's stable enough to take the printscreen, open paint, save, copy to this computer, and idle for 15 minutes without bsod. hope it doesnt have any damn walls, hoping it can do world record..
It runs @ -52 which is my max for it, tested it once, but not on that board, another bios. the new bios for the mobo is way better than what ive tested back then, but for now, following the rules, i might be posting the result in a thread @ dice![]()
Last edited by imsochobo; 03-20-2009 at 07:16 AM.
PHII-3800mhz-2500mhzHT,1500W(dual750Pcpower&cooling)silverstone TJ07, dualrad120MM,4870CF, MushkinPC9200-1200mhz5-5-5-15
~1~
AMD Ryzen 9 3900X
GigaByte X570 AORUS LITE
Trident-Z 3200 CL14 16GB
AMD Radeon VII
~2~
AMD Ryzen ThreadRipper 2950x
Asus Prime X399-A
GSkill Flare-X 3200mhz, CAS14, 64GB
AMD RX 5700 XT
awesome result gotvoltage! i believe that is a air/water WR for any phenom 1 according to hwbot!
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
SweClockers.com
CPU: Phenom II X4 955BE
Clock: 4200MHz 1.4375v
Memory: Dominator GT 2x2GB 1600MHz 6-6-6-20 1.65v
Motherboard: ASUS Crosshair IV Formula
GPU: HD 5770
I'm seeing some really impressive Phenom I results, keep up the good work![]()
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
any 1 got a cd-rom ? :P im one down, killed my windows.
and btw, dont attach too power hungry fans on the motherboard, one transistor on my motherboard poped into sparks, and hit the roof.
DFI still going strong
Comming with more when i got a cd-rom or any method to install that damn windows again.
chewy, post date of creation, and post of ending.
Youve edited post, hard to know.
Thankya.
Last edited by imsochobo; 03-20-2009 at 02:09 PM.
PHII-3800mhz-2500mhzHT,1500W(dual750Pcpower&cooling)silverstone TJ07, dualrad120MM,4870CF, MushkinPC9200-1200mhz5-5-5-15
Well ,, i found my Third tripple Rad,, Its now in the loopI thought two would do it.
WELL my Idle is now 26c instead of 29-30c @1,74v...More to come..Fridaynight special..Beer Oclock ....Then Overclock![]()
gOtVoltage
![]()
CPU:..................AMD Phenom II x4 940BE @ 3.7ghz [201x18.5]@1.472v and growing
COOLER:............Sunbeam core-contact Freezer
MOBO:...............BIOSTAR TA790gx 128m
MEM:.................8GB Gskill pc8500@ 1072mhz [5,5,5,15,23,2t]@2.1v
GPU:..................2x Visiontek Hd4850s Xfire @500/775@1.056V 2D - 810/1100@1.351v 3D +accelero S1
HD:....................250 gig WD hd
HD:....................500 gig WD hd
PSU:...................Antec EA650
CASE..................Antec 900
OS:....................Dual boot Xp64 and Vista64 Ultimate
~1~
AMD Ryzen 9 3900X
GigaByte X570 AORUS LITE
Trident-Z 3200 CL14 16GB
AMD Radeon VII
~2~
AMD Ryzen ThreadRipper 2950x
Asus Prime X399-A
GSkill Flare-X 3200mhz, CAS14, 64GB
AMD RX 5700 XT
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Sounds nice
Wonder if we will see a new world record for 9850 or even overall PHI![]()
PHII-3800mhz-2500mhzHT,1500W(dual750Pcpower&cooling)silverstone TJ07, dualrad120MM,4870CF, MushkinPC9200-1200mhz5-5-5-15
lol, this is some good fun. I wish I had my PH I, I would give you guys a run for your money. That sucker would max out at 2.8ghz
Nice clocks guys! Keep em coming!
L@@k line #50
Well thats all she wrote............I think i set a decent bar......
I m leaving to Bakersfield for a week,, So this means everone gets an Extra week to Pony up the Scores..
Have fun and trust me Clocking a 140watt chip is a battle you wouldnt believe,, but i tell ya ,,it did take Lots of Beer and some big Icecubes
I check back during the week While im @ my Bro's house in Socal.
have fun all .
gOtVolTage
Last edited by gOtVoltage; 03-22-2009 at 01:13 PM.
Nice work man, spanking some PH II overclocks with that PH I of yours![]()
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
~1~
AMD Ryzen 9 3900X
GigaByte X570 AORUS LITE
Trident-Z 3200 CL14 16GB
AMD Radeon VII
~2~
AMD Ryzen ThreadRipper 2950x
Asus Prime X399-A
GSkill Flare-X 3200mhz, CAS14, 64GB
AMD RX 5700 XT
Question, is Ice allowed for watercooling ?.
And is printscreen is required ?, if 3900 is stable enough to show, but screen isnt allowed, there is usually just 20 mhz between printscreen stable and show stable on PH1 though.
PHII-3800mhz-2500mhzHT,1500W(dual750Pcpower&cooling)silverstone TJ07, dualrad120MM,4870CF, MushkinPC9200-1200mhz5-5-5-15
As long as the temps are within the limits of the contest anything goes.....so say you live on the center of the equator and ambients are 90F......Yes you could use Ice to cool the temps down.....as long as you do not exceed the limits on temps I imposed for water....etc if we see temps of cpu lower than ambients I have set.......it results in a disqualification....trying to keep it fair for those on air![]()
DI on an air cooler or on a water cooling radiator is not permitted....as this question was asked...
I chose printscreen and MS paint because it requires some level of stability, sometimes more stability than is needed for a cpu-z capture.....a screen capture program defeats that level of stability i'm looking for. This way the playing field is 100% even etc everyone is printscreen/mspaint stable.
Last edited by chew*; 03-23-2009 at 06:44 AM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
sounds nice, lets start the icemachine, i hope i dont have any issues with too much ice :P
My PH2 ran 7 hours at sub 20's :p
PHII-3800mhz-2500mhzHT,1500W(dual750Pcpower&cooling)silverstone TJ07, dualrad120MM,4870CF, MushkinPC9200-1200mhz5-5-5-15
Less than a week to go, get those results in guys.......
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
relax relax m8its just a day before i can start again, found out there was benching results from a m8, who had some records and alike on the harddrive.
which i crashed :P
so recovered, in windows install, is @ 39 minutes remaining. and actually while writing, i got error on NTFS.sys, not good...
anyways. got drives at school, ready with ice, water and 9850, and a little 9900 B2 just for fun![]()
PHII-3800mhz-2500mhzHT,1500W(dual750Pcpower&cooling)silverstone TJ07, dualrad120MM,4870CF, MushkinPC9200-1200mhz5-5-5-15
gl imsochobo, i almost expected gotvoltage to hit 3.9 w/ his setup since he could run 3.6 stable but if you also get over 3.9 that will be impressive! i cant do it w/ my 9850 on weak air, i think water i could give it a run but i could only get screens barely over 3.8ghz w/ 1.73v,,, could maybe open the windows and try to get temps down a little bit but i really have no need for the 720 and would feel bad puttin it in a seller rig so i'll just let you guys have your fun![]()
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
Chew, Can I cool the mosfets with DI? this board dont like 140w chips over 1.55v, Im wondering if it will help any.
CPU:..................AMD Phenom II x4 940BE @ 3.7ghz [201x18.5]@1.472v and growing
COOLER:............Sunbeam core-contact Freezer
MOBO:...............BIOSTAR TA790gx 128m
MEM:.................8GB Gskill pc8500@ 1072mhz [5,5,5,15,23,2t]@2.1v
GPU:..................2x Visiontek Hd4850s Xfire @500/775@1.056V 2D - 810/1100@1.351v 3D +accelero S1
HD:....................250 gig WD hd
HD:....................500 gig WD hd
PSU:...................Antec EA650
CASE..................Antec 900
OS:....................Dual boot Xp64 and Vista64 Ultimate
Bookmarks