Question
I had my Memory at multi of 4 and my uncore at 8, should I run my uncore at a multi of 9? I do not have option to change my QPI multi due to BIOS limit, but I believe it is running at 3300MHZ so with a base clack of 185 so a multi of 18? Sound right. Well anyways my system seems stable now at 3.9 with HT on and Turbo but I want to try and hit 3.9 with out turbo on. I believe max QPI is 1.35 and max Intel voltage is 1.375? Poor thing is my Mobo MSI Eclipse does not have the proper circuity for a sensor to read the Voltage, which sucks they dropped the ball here. But what is Default i7 920 QPI since I can not tell what mine is. I have been going with a default for this 920, of 1.12V, is that right? Sicne I have +0.100V added to that which makes 1.22V, or is 1.22 default for 920 so then I have QPI at 1.32V, which is a lot closer to Intel's max? I do not want to pump to much QPI voltage into the chip, but it will not boot or be stable at my 3.9 without it being +0.100V, and it has to be +0.180 for anything over 3.85 without turbo, so if the default is 1.22V that would make the QPI voltage 1.40, which is way to high for my liking.