Cooler Master HAF 932

[LuckyNV]

nope, fan spacing is 15mm

[cardnut99668]

How hard would it be to get it to fit?

[LuckyNV]

should be easy, I know someone who fit the PA120.3 such that the front fan hole was used correctly and then he just drilled holes (or widened the holes in the mesh) in the right place in the mesh for the other fan holes.
He didn't fit every screw though, just enough to hold the rad in place

[Blacky]

Is it possible to fit a Thermochill PA120.3 in the top of this without modification? I've been considering getting one.

Yes

[vikrant333]

I came up with 3 ideas so far for the filters. Foam filter from a room air condtioner, panty hose and paint filters. Will probably try all 3 to see what works best and looks best.

how to put customize dust filters on it ??
as the HAF is vaccum cleaner . my inner of cabinet looks same like inner of vaccum cleaner.
someone told me use the AC dust filter by removing the fan and put the filter on it and it helps quite a lot...

[Odyssey96]

Firts of all, thanks Blacky for your help on the water loop!

Heres my pre-final look!, waiting for another UV cathode and a fan I ordered to finish the rig. Enjoy !







Overall, I'm extremely happy with my new platform, it has surpassed my expectations !

Great job, that looks fantastic.

[Malbadawi]

do you guys think the hydrx( uv green) will be a good color in this case?

[evoted]

Well im almost done with mine, ill update the pic when im done, i got 1 thing left to do.

[vikrant333]

someone told me......bump how to put dust filters on haf 932

[Darren K]

I'm probably going to swap the 230mm side door fan for 4x 120mm Noctua fans. Can anybody please tell me how I can wire the 4 fans together (using an adapter or whatever) to plug them directly into my Corsair HX1000.



I'm trying to keep the damn NB temp down without getting into watercooling at the moment.

I have used my imagination and fitting an additional Noctua fan that blows onto the NB heatsink and RAM slots. Sadly this has only reduced the temp by 3-4 degs, temp now sits @ 40 deg.


Also thinking if it's possible to fit my HX1000 PSU at the top of the case instead of at the bottom. This way I could have 2 more fans in the floor.
Can this be done?

Thanks guys...

[Roguegamingpc]

Her is my finished product, my only complaint is that it weighs a ton!




and Pre I7

[LOUISSSSS]

how thick are the side panels of this case? thicker than the aluminum in the LL V1000? do they bend easily? how about compared to the centurion 5?

anyone want to buy my LL V1000B Plus?

[SNiiPE_DoGG]

certainly not thicker than v1000 panels, they are the thickest panels ever put on a case lol.

[sadidas]

Hello XS! I was observing this wonderful forum quite a long time so it's time for me to finally "enter"
Here's my share to the HAF owners around the globe

I'm probably going to swap the 230mm side door fan for 4x 120mm Noctua fans. Can anybody please tell me how I can wire the 4 fans together (using an adapter or whatever) to plug them directly into my Corsair HX1000

As You can see I'm using 4 120mm fans instead of one big & ugly 230mm. I "joined" the 4 fan cables with soldering gun Basically You have to brutally cut off 3 fan connectors and solder the loose wires to 4th fan connector - black to black and red to red. I didn't soldered the yellow rpm ones. Then just connect the connector to Your psu. You can also use sone fan cable splitter if You like:

[LOUISSSSS]

Just ordered my HAF today, guess the consensus was that it was generally a better case than the Antec 1200.

i would've ultimately preferred a Lian Li Full tower, but i just can't afford it in this recession. their quality is remarkable.

we'll see how this case compares in quality to my LL v1000

[shaolin95]

Sweet..welcome to the club. I just ordered some red sound activated lights for mine..trying to pimp it a bit now. :-)

[LOUISSSSS]

Sweet..welcome to the club. I just ordered some red sound activated lights for mine..trying to pimp it a bit now. :-)

nice, but i'm not the type to like LEDs from my computer case.

i'm planning to change out the red front fan with a non-led one and also find a way to dim that bright blue power LED

[SabreSword]

Anyone going to the soup line for supper since we are in a recession?

[lee143]

As You can see I'm using 4 120mm fans instead of one big & ugly 230mm. I "joined" the 4 fan cables with soldering gun Basically You have to brutally cut off 3 fan connectors and solder the loose wires to 4th fan connector - black to black and red to red. I didn't soldered the yellow rpm ones. Then just connect the connector to Your psu. You can also use sone fan cable splitter if

From one of the great guides in the forums, I'm pretty sure you do not solder the yellow ones because then it gives you the RPM * How many fans you have. I wish I could find the guide since I used it to connect my rad fans together.

Anyone going to the soup line for supper since we are in a recession?

Huh?

[LOUISSSSS]

for those who r watercooling their HAF, which way do youguys have ur barbs pointing down from? the drive bays side or the rear side?

[bito]

Greenfox....could you post some pics from the top please so we can see the mods. required to fit the PA120.3 ?

Thanks

[LuckyNV]

for those who r watercooling their HAF, which way do youguys have ur barbs pointing down from? the drive bays side or the rear side?

I have seen pics of people using either end

[Blacky]

Greenfox....could you post some pics from the top please so we can see the mods. required to fit the PA120.3 ?

Thanks

He is gooing to take some shots today and upload them ASAP mate

[Greenfox]

Great job, that looks fantastic.

Thanks man!

Greenfox....could you post some pics from the top please so we can see the mods. required to fit the PA120.3 ?

Thanks

Sure I took these with my iPhone sorry for the bad quality!

[bito]

^^^ Great....Looks good, so just two extra holes drilled in the front bit, any under the cover ?
No mods to the PA120.3 ?

Thanks