2920 is the highest I have reached on NB speed so far with this BIOS, but 2800 has been rock stable. I finally got up to 1180 on memory with a 4GB kit also, overall this BIOS is better, but still needs work.Originally Posted by chew*
2920 is the highest I have reached on NB speed so far with this BIOS, but 2800 has been rock stable. I finally got up to 1180 on memory with a 4GB kit also, overall this BIOS is better, but still needs work.
Hmm I find it kinda weak NB wise compared to the 790GX IIRC I primed with 2800 NB plus, Ill get comparison for you in a bit, I managed 1200 now on a set of 1066 ram with rated timings for 1066 mode.
Ram clocks seem strong on the retail 940BE and this board but NB is lacking with ram downclocked compared to what I know this chip can do.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
HW monitor in bios and measured with multi meter.... windows software is wrong.
Needs just some minor tweaking looks like my ram needs about .02 volts.
Last edited by chew*; 03-11-2009 at 07:17 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
i tried the 1002 BIOS for 48 HRS but ended up going back to the 801 version. With 801 I could get the NB slightly above 2800MHz pretty easy, but with the 1002 I couldn't get it stable past 2600MHz. I also wasn't able to get my chip stable at 4GHz whereas I could on the 801. I'm going to wait for the next release and hope it will let me run my high NB speeds like the 801 does.
Prime stable 3 hour at 3800+ with 2800+ NB and bios settings it takes
Added max NB clocking with high ram and some PI to show efficiency also.
Post #2 first page.
Bugs 1102
Cpu-z reports voltage incorrectly after 1.45v
K10 stat Pstate tab is not usable, even setting it to defaults = BSOD, believe this could be due to improper voltage reporting (AOD 2.14 works and current tab in K10 stat works)
vcore voltage is way off, off by 2 full steps, 1.6125 = 1.5875
Not really a bug but its somewhat of a struggle to get stable speeds that were known good on another board with same chip.
Last edited by chew*; 03-12-2009 at 09:38 AM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Updated more results page 1 post 3
Just thought I would note something, I'm finding this board very inconsistent.
I am for now going to attribute it to bios but in the back of my mind i'm thinking dirty power is the culprit.
Last edited by chew*; 03-12-2009 at 07:31 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Chew:
What makes you think this board is inconsistent? Do you mean you are stable at certain times and not at others without touching the settings?
I've found this board to be quite quirky with vcore and I'm never really sure how much I'm getting once in Windows because I can't find an accurate piece of software. My clocks seem to be quite consistent, although they vary from BIOS to BIOS. I'm hoping a later BIOS release will help with the vcore issues. but otherwise I'm quite pleased with this board.
I've been saving profiles. Sometimes it passes prime somtimes it doesn't this is usually attributed to ripple = dirty power source. I double checked to see if somehow the profiles were'nt being applied properly and mnauallly set all settings from a new flash, same results.....
I can bench one time then fail 2 times bench again and pass then fail 3 times then pass 2 times........totally inconsistent....no rhyme or reason.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Heat is thine enemy! A cool day breaks 3.5g's : This board just wants more xtreme cooling!
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D///
Seeing the same here. Tested with two 940's now and getting strange behavior on both. Very similar too my old K9A2 plat v2 in that matter, dodgy when you push it :/
Edit: That inc 1102
Asus Crosshair IV Extreme
AMD FX-8350
AMD ref. HD 6950 2Gb x 2
4x4Gb HyperX T1
Corsair AX1200
3 x Alphacool triple, 2 x Alphacool ATXP 6970/50, EK D5 dual top, EK Supreme HF
Page 1 updated Dry Ice 720BE results.
Bingo, 1102 bios was much better than another bios i was using (mod bios ).
Still a little inconsistent, most notable bug was at 1.63v measures 1.7vcore with voltmeter and in bios hardware monitor.....
I explored further and it seems everything after 1.6125 overvolts a rather large amount. .050 or greater.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Where is the vcore read point chew? I'd like to check the voltage out on my setup.
--Matt
My Rig :
Core i5 4570S - ASUS Z87I-DELUXE - 16GB Mushkin Blackline DDR3-2400 - 256GB Plextor M5 Pro Xtreme
Will try to get a pic for you, tired today...long night. Board is still drying out.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
ASUS is working on it, we had the same problem under LN2 this weekend, voltages just flat ran away on us. Also, figured out the low NB clocking compared to 0801, should get that fixed also. MSI just got me a BIOS that looks like it might work this time.
Sounds good, will keep plucking away at it. Tried upping NB btw....2925 is the limit. Voltage is useless.
Sounds good looking forward to the MSI.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Matt as per your request.........I'm working out a vmod as we speak but bear with me i'm amatuer at best with this stuff.....I will likely get a second hand opinion as I hate giving misinformation.
Adding this to page 1 so it doesn't get lost in posts......yellow circled is the chip pic 1.....yellow circled pin is read point pic 2. Have fun
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Chew,
Sorry for the stupid q, but what do you mean about the PWM? I have this board coming with a 940BE, 4G Dominator w/fan and a Sapphire Toxic 1G 4870. I only have a 9700LED for now but plan on Swiftech H20-220 APEX Extreme kit for cooling. Stuff it all in my Antec 1200 with Antec TP 1KW psu. Any pointers would be greatly appreciated. Aloha.
Hey Lathode,
I am building that same machine.
Mobo: M4A79 Deluxe
CPU: Phenon II 940BE
Ram: 4gb Corsair Dominator (Maybe 8)
CPU Cooler: CNPS9700LED (soon Swiftech H20-220 Apex Ultima Extreme Kit)
Vid: Sapphire Toxic 1GB 4870
Sound: Onboard but have X-Fi Extreme Gamer just sitting here in a box
HD: OS - 300Gb Velociraptor (Striped eventually)
Data - 1TB WD
DVD: (2) Asus DRW-2014L1T Sata
Case: Antec 1200
PSU: Antec TP 1KW
4 mosfets at the bottom of the ram slots get a tad hot, will have to be low profile heatsink....vidcard willl interfere....
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Just some observations: with bios 0801 i was able to boot the system right into windows at 260htt with all voltages at stock apart from Vcore and Vdimm, with bios 1102 anything over 210htt resulted in no boot!
Trying to get my new 2x1GB OCZ Platinums stable i had to set Vdimm manually to 2.1V and Trfc to 195ns for both. I got a few errors in the black slots but none in the yellow ones.
Yesterday i was able to boot at 19,5x200 and run 3d mark06 at just 1.51Vcore, after that it isn't even stable in windows any more at the same settings and still ain't.
I'm still pretty much puzzled by this sytem.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Zeus set your clock skew DPS to normal for the OCZ's with 1102 I'm using 2.24v for 1200 ramJust some observations: with bios 0801 i was able to boot the system right into windows at 260htt with all voltages at stock apart from Vcore and Vdimm, with bios 1102 anything over 210htt resulted in no boot!
Trying to get my new 2x1GB OCZ Platinums stable i had to set Vdimm manually to 2.1V and Trfc to 195ns for both. I got a few errors in the black slots but none in the yellow ones.
Yesterday i was able to boot at 19,5x200 and run 3d mark06 at just 1.51Vcore, after that it isn't even stable in windows any more at the same settings and still ain't.
I'm still pretty much puzzled by this sytem.
Last edited by chew*; 03-17-2009 at 01:21 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Yes please show your timings.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Your plats will probably have more headroom at slacker timings....It will also take some stress off the IMC, in the end you will likely see faster performance. They will most likely go higher than mine etc over 1200 with the 1102 bios....you will have to add a tad of volts though....i've run up to 2.26 and had no issues.
Leave drivestrengths on auto for now, I haven't fine tuned them for max performance yet, as I've been busy and its time consuming to get it right. Looks like I forgot to set DCT mode, Run it unganged......
I'm running in the black slots. 2 x2g OCZ golds, might give my 2x2g OCZ plats a spin tommorow......
Last edited by chew*; 03-17-2009 at 10:12 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
here's a little performance comparison I did.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Does anyone know why my board is having problems reporting the FSB correctly? Like I will have it set to 200 in the bios, but cpuz reports it as 200.7, or even sometimes it went down to 193MHz when set to 200, with a 16.5 cpu multi, NB of 2400, and HT link of 2.0. And if move the FSB up to even 201 it still reports as 201.7 I'm running vista x64 also if that matters.
Posting Permissions
Reply With Quote
Bookmarks