oh sorry i didnt saw that^^
1. try:
AI Clock Twister [Strong] > Moderate
CPU PLL Voltage [1.50] > 1.56v
SBridge Voltage [1.10] > Auto
PCIE SATA Voltage [1.50] > Auto
--> But now I get Memtest Errors after 0.5min^^ So i think PLL is too high ?
Next try:
above Sttings +
CPU PLL Voltage [1.56] > 1.52v
C1E [Enabled] > [Disabled]
AI Clock Twister [Strong] > Moderate
--> Memtest Errors after 4minI think 1.5 i also to high^^ I need 1.48
Next try:
above Sttings +
CPU PLL Voltage [1.52] > 1.50v
--> 2 Errors after 30min I NEED LESS PLL!
Next try:
I took the 2 OCZ Reaper from Slot A1 and B1 to A2 and B2
and used the following Settings:
CPU PLL Voltage [1.50]
AI Clock Twister [Moderate]
FSB Strap to North Bridge [333]
DRAM Frequency [1021]
NB Voltage [1.26]
Common Performance Level [8]
MEM. OC Charger [Disabled]
all others like in my first post
--> seems stable! o0 it is so strange, because i already tested these Settings and they weren't stable (Memtest Error 0.5min) but now they are stable. But why because i changed the memory place or because NB Voltage is lower now? I also need so less Vnb![]()
Bookmarks