needed an update to dotnet 3.5 service pack1.... then the Microsoft Visual C++ 2008 Redistributable Package installed without issue....
thanks again for the help....
edit-ok i have my 4870's running every bench at 840mhz@1.3v
my problem is that once i set the voltage, it stays at that amount even back in 2d mode....
could someone enlighten me as to what i'm getting wrong... thanks again....
Last edited by purecain; 03-08-2009 at 05:22 AM.
It shouldnt, mine doesnt.
Originally Posted by alacheesu
now it sets the voltage back to stock... but only on one card and i have to set the voltage for both individually....
i'm at a complete loss here folks ????????
Does this work with a 9800gx2? Does anyone know of a program that does?
How do you start rivatuner when vista starts but without that stupid pop-up window asking do I allow...
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
How come on my 4870x2, gpu0 is 1.06 and gpu1 is 1.26? Otherwise the plugin seems to work fine.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
Cause probably u run on 9.2's and the second gpu runs @ 3d clocks, while the other is on 2d.
Project ZEUS II
Asus Rampage II Extreme
Intel I7 920 D0 3930A @ 4.50GHz (21 X 214mhz)
3 x 2GB G.Skill Trident 1600 @ 1716MHz (6-8-6-20-1N)
2 x Asus HD 6870 CrossFire @ 1000/1100MHz
OCZ Vertex 2 60GB | Intel X25-M 120GB | WD Velociraptor 150GB | Seagate FreeAgent XTreme 1.5TB esata
Asus Xonar DX | Logitech Z-5500 | LG W2600HP 26" S-IPS LCD
Watercooling setup:
1st loop -> Radiator: 2 x ThermoChill PA120.3 | Pump: Laing DDC-3.25 with Alphacool HF 38 top | CPU: Swiftech Apogee XT | Chipset: Swiftech MCW-NBMAX | Tubing: Masterkleer 1/2" UV
2nd loop -> Radiator: ThermoChill PA120.3 | Pump: Laing DDC-3.2 with Alphacool HF 38 top | GPU: 2 x EK FC-6870 | Tubing: Masterkleer 1/2" UV
Assembled in Mountain Mods Ascension Trinity
Powered by Corsair Professional Series Gold AX1200
thanks for the reply... that would make sense....
\I guess that's about UAC?
Just go to Control Panel, User Accounts and Turn User Account Control On or Off, first thing I do when I install VistaIm seriously wondering the point of that feature anyway
Synaptic Overflow
CPU:
-Intel Core i7 920 3841A522
--CPU: 4200Mhz| Vcore: +120mV| Uncore: 3200Mhz| VTT: +100mV| Turbo: On| HT: Off
---CPU block: EK Supreme Acetal| Radiator: TCF X-Changer 480mm
Motherboard:
-Foxconn Bloodrage P06
--Blck: 200Mhz| QPI: 3600Mhz
Graphics:
-Sapphire Radeon HD 4870X2
--GPU: 750Mhz| GDDR: 900Mhz
RAM:
-3x 2GB Mushkin XP3-12800
--Mhz: 800Mhz| Vdimm: 1.65V| Timings: 7-8-7-20-1T
Storage:
-3Ware 9650SE-2LP RAID controller
--2x Western Digital 74GB Raptor RAID 0
PSU:
-Enermax Revolution 85+ 1250W
OS:
-Windows Vista Business x64
ORDERED: Sapphire HD 5970 OC
LOOKING FOR: 2x G.Skill Falcon II 128GB SSD, Windows 7
VT1165 plugin works nicely with 9800GX2.
Last edited by SoHiSter; 03-23-2009 at 03:50 PM.
I just cant get this to work.
Uses all other plugins fine but not this.
More button is greyed.
2x GTX 295 Quad SLI.
are you clicking on the right graph?
3570K @ 4.5Ghz | Gigabyte GA-Z77-D3H | 7970 Ghz 1100/6000 | 256GB Samsung 830 SSD (Win 7) | 256GB Samsung 840 Pro SSD (OSX 10.8.3) | 16GB Vengeance 1600 | 24'' Dell U2412M | Corsair Carbide 300R
Reinstalling whole RivaTuner now...
Working fine on my GTX295...
Does anyone have the default core voltage for a GTX285 ?
I'm guessing if it's a little higher than the GTX295's so it'll be a good "safe" starting point for 24/7 Folding.. (full cover EK waterblock, so no cooling issues)
You can use the vt1165 plugin for voltage control on the 4890 as well. But does anyone know how to make RivaTuner save the increased voltage and auto apply it when RivaTuner loads? Right now I am manually having to go in and increase the voltage every computer restart.
Rig 1:
ASUS P8Z77-V
Intel i5 3570K @ 4.75GHz
16GB of Team Xtreme DDR-2666 RAM (11-13-13-35-2T)
Nvidia GTX 670 4GB SLI
Rig 2:
Asus Sabertooth 990FX
AMD FX-8350 @ 5.6GHz
16GB of Mushkin DDR-1866 RAM (8-9-8-26-1T)
AMD 6950 with 6970 bios flash
Yamakasi Catleap 2B overclocked to 120Hz refresh rate
Audio-GD FUN DAC unit w/ AD797BRZ opamps
Sennheiser PC350 headset w/ hero mod
Yup, RT has a scheduler with which you can apply your voltage setting on startup. Works perfectly.
Create a new task in the Rivatuner Scheduler tab by clicking the green + icon.
Give your task a name.
Select Launch application from the pull down menu.
In Path type %RT% for application and in the Command line box type the parameters the voltmod plug-in gives you.
Finally, select Run Task at Windows start up.
does this work on the 4890? I can get to 950mhz core clock with stock volts, just want to edge it up to 1ghz 1ghz on my msi reference card.
Aaron___________________________Wife________________________ HTPC
intel i7 2600k_____________________AMD5000+ BE @ 3ghz___________AMD4850+ BE @ 2.5ghz
stock cooling______________________CM Vortex P912_______________ Foxconn A7GM-S 780G
AsRock Extreme 4_________________ GB GA-MA78GM-S2H 780G_______OCZ SLI 2gb PC6400
4gb 1600 DDR3___________________ OCZ Plat 2GB PC6400___________Avermedia A180 HDTV tuner
MSI 48901gb 950/999______________Tt Toughpower 600w___________ Saphire 4830
Corsair HX620____________________ inwin allure case___________ ___ Coolmax 480w
NZXT 410 Gunmetal________________Acer 23" 1080p________________ LiteOn BD player
X2gen 22" WS________________ ________________________________ nMediaPC 1000B case
yes the vt1165 plugin for RivaTuner works. I can get 1022MHz core speed on the 4890 with 1.375v, record for screenshot only is 1048MHz.
Thanks for the help, I will put in a new schedule for auto applying voltage when I get home today.
Rig 1:
ASUS P8Z77-V
Intel i5 3570K @ 4.75GHz
16GB of Team Xtreme DDR-2666 RAM (11-13-13-35-2T)
Nvidia GTX 670 4GB SLI
Rig 2:
Asus Sabertooth 990FX
AMD FX-8350 @ 5.6GHz
16GB of Mushkin DDR-1866 RAM (8-9-8-26-1T)
AMD 6950 with 6970 bios flash
Yamakasi Catleap 2B overclocked to 120Hz refresh rate
Audio-GD FUN DAC unit w/ AD797BRZ opamps
Sennheiser PC350 headset w/ hero mod
Nice one... Thanks.
FYI: I had to enable the plugin from GUI as the registry key wouldnt work.
Win7 7000 x64
HD 4890
Cat 9.4 Win7_x64
Rivatuner 2.24
this is the bees knees... thanks!!!
(currently clocking)
asus r3e / 980x / mush ridgies / 2x gtx580 / cs ax1200 / mm pinnacle 24
loop 1: mcp655 / ek320 / st xt / kl mb-asr3e / bp multi250
loop 2: mcp655 / st qp320 / 2x st fc580 / bp multi250
Hi fgw!
I get the same red screen of doom also hohoho
Card is a PowerColour 4890 PCS+ 950MHz
http://www.xtremesystems.org/forums/...9&postcount=40
However it wont allow me to attach the LOG FILE
Or attach it via PM for that matter...
Do i need to host it somewhere and then link it over, then attach???
Hope not... that is sigh...
I could email if you want
Lemme know!
CPU: E8400 E0 (Cooled By OCZ Vendetta 2) @ 4.3ghz/1.296vcore
Motherboard: GB EP45-DS4P BIOS F8
Memory: OCZ DDR2 PC2-8500 (1066mhz) 2x2gig - & Corsair Dominator RAM cooler
Graphic: PowerColor PCS+ HD4890
HDD: 2x WD 640GB, 1x Maxtor 180GB
Really nice plugin, loving this one thank you.
working on 4870 and 4870 x2 not tried gtx 295 yet.
isnt the PowerColour 4890 PCS+ non referenceHi fgw!
I get the same red screen of doom also hohoho
Card is a PowerColour 4890 PCS+ 950MHz
http://www.xtremesystems.org/forums/...9&postcount=40
However it wont allow me to attach the LOG FILE
Or attach it via PM for that matter...
Do i need to host it somewhere and then link it over, then attach???
Hope not... that is sigh...
I could email if you want
Lemme know!
"Cast off your fear. Look forward. Never stand still, retreat and you will age. Hesitate and you will die. SHOUT! My name is…"
//James
Ye - i think that has an impact, but i was thinking perhaps it could be fixed
Im not totally clear on it all
actually -, uses a different voltage control... dang... answered my own question!
CPU: E8400 E0 (Cooled By OCZ Vendetta 2) @ 4.3ghz/1.296vcore
Motherboard: GB EP45-DS4P BIOS F8
Memory: OCZ DDR2 PC2-8500 (1066mhz) 2x2gig - & Corsair Dominator RAM cooler
Graphic: PowerColor PCS+ HD4890
HDD: 2x WD 640GB, 1x Maxtor 180GB
Posting Permissions
Reply With Quote
Bookmarks