Core i7 Overclocking by Batch #

[Renegade5399]

Ok then now I have come to my 24/7 setting.. Think this is quite good though.

Vcore - 1.40(bios) 1.37.6(unloaded) 1.36(Loaded with LinX)
QPI/VTT - 1.38
vDimm - 1.70 (1.69)
Uncore @ 18x 3600
HT - OFF
Turbo - ON

Batch #3841A627

15 run of LinX ALL mem button, Realtemp shows minimum and Maximum temp, Avarage during linx was 62 highest, and 55 lowest core.

If that's a 64bit OS, you need to check the 64 bit Mode box. That way LinX can use all your RAM. In you pic there, you're only using about 1.6GB even with the All button pressed because LinX is not in 64 bit mode.

EDIT: I see that box is greyed out for you. Are you running a 32bit OS? Why?