could somebody help me out?im not good with memory timings but i want to get the best performance out of these g.skil 9600's 2x2GB.would someone be so kind as to fill out this template for me with performance type settings,doesnt matter if its too tight for stability ill mess around with it.i just dont really know which one to change. thank you


Performance Enhance.............................[Standard]
Extreme Memory Profile (XMP)....................[ Auto ]
(G) MCH Frequency Latch.........................[ 266 ]
System Memory Multiplier........................[ 2.50A ]
Memory Frequency ..............1066.............1275
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time...............[ 5 ].........[ ]
tRCD...........................[ 5 ].........[ ]
tRP............................[ 5 ].........[ ]
tRAS...........................[ 15 ].........[ ]

******Advanced Timing Control******

tRRD...........................[ auto ]..........[ ]
tWTR...........................[ auto ]..........[ ]
tWR............................[ auto ]..........[ ]
tRFC...........................[ 55 ].........[ ]
tRTP...........................[ auto ]..........[ ]
Command Rate (cmd).............[ auto ]..........[ ]

******Channel A Timing Settings******

Static tRead Value [ 8 ] ................[ 8 ]
tRD Phase0 Adjustment [ 0 ] ................[ ]
tRD Phase1 Adjustment [ 0 ] ................[ ]
tRD Phase2 Adjustment [ 0 ] ................[ ]
tRD Phase3 Adjustment [ 0 ] ................[ ]

tRD 2rd (Differnt Rank) [ auto ] ................[ ]
tWR 2wr (Differnt Rank) [ auto ] ................[ ]
tWR 2rd (Differnt Rank) [ auto ] ................[ ]
tRD 2wr (Same/Difft Rank) [ auto ] ................[ ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel A Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Channel B Timing Settings******

Static tRead Value [ 8 ] ................[ 8 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ Auto ] ................[ ]
tWR 2wr (Differnt Rank) [ Auto ] ................[ ]
tWR 2rd (Differnt Rank) [ Auto ] ................[ ]
tRD 2wr (Same/Difft Rank) [ Auto ] ................[ ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel B Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]