Quote Originally Posted by jbruneau View Post
Well, I've got my system running as good as I can get it:

FSB 433
Multi 8x
Strap 333
PL 10
VCORE 1.4750
FSBTERM 1.26
NB 1.3
SB 1.2
PCIE 1.5

So, 3.0GHz at the CPU and 1040MHz at the RAM. Not too bad, ram's rated at 1066 5-5-5-12 (2x2GB Kit), which it's running right now.

2 hours of OCCT testing passed A-OK. Max temp on cores 0/1 reaching 50 degrees C, and max temp on cores 2/3 reaching 40 degrees C. Max temp on NB reaching 40 degrees C. Not too shabby!

I'm happy !

I tried for 3.45GHz with the 8x multi, pushed 1.525V VCORE and 1.30V FSB-TERM but couldn't get Vista x64 to boot. Same boat with a 466 FSB at 6/7 multi. I wasn't about to push anymore volts anywhere without liquid. Maybe during the summer I can liquid cool the CPU/NB/SB/GPU, we'll see, cost pending.

Thank You very much for your help there, Ket! I wouldn't be running here without your help!
Try increasing your Vdimm to 2.2 - 2.26v, sounds like a memory limitation your running into there. Check your mems though with that voltage, if their getting pretty hot, slam a fan over them.