Someone know if I can run 8Gig at 1066Mhz?
And whats the kit? Corsair, Crucial, Ocz...?
Or maybe I just can add another Corsair 2x2048 8500CD5??
...thx!
Someone know if I can run 8Gig at 1066Mhz?
And whats the kit? Corsair, Crucial, Ocz...?
Or maybe I just can add another Corsair 2x2048 8500CD5??
...thx!
Last edited by Funkyhz; 03-01-2009 at 05:55 AM.
I5 2500K 4.5GHz
Maximus V Gene Z77
DDR3 8GB F3-2400C10
SSD 180GB Sata3
GTX 590 hydro
T240 5760 x 1200
AX1200
650D
z906 5.1
Apogee HD, Tygon, MCP655, IceDragon
[SIGPIC][/SIGPIC]
I don't see why not. I think you could just add another 2x2gb kit.
stay away from crucial
Case: PPC's Powdercoated TJ07
Mobo: EVGA 780i SLI (FTW Edition)
Cpu: E8500
Ram: Coming Soon
Sound: Asus Xonar D2
Psu: Zalman ZM 1000 Watt
Gpu: GTX 295 W/ DD-GTX 295 WB
HDD : 2x1 250 Caviar SE 16's
HDD 2: 1 TB Samsung 32 MB cache (Movies)
Water Cooling:
Pump: Laing D5 MCP 655 Rad: XSPC RX360
Cpu: Apogee GTZ Res: XSPC 250mm Passive
I'm using g skills at 1000 mhz, anything much higher and they become very unstable. they are the cheap blue sticks off of newegg.
PC Lab Qmicra V2 Case SFFi7 950 4.4GHz 200 x 22 1.36 volts
Cooled by Swiftech GTZ - CPX-Pro - MCR420+MCR320+MCR220 | Completely Silent loads at 62c
GTX 470 EVGA SuperClocked Plain stock
12 Gigs OCZ Reaper DDR3 1600MHz) 8-8-8-24
ASUS Rampage Gene II |Four OCZ Vertex 2 in RAID-0(60Gig x 4) | WD 2000Gig Storage
Theater ::: Panasonic G20 50" Plasma | Onkyo SC5508 Processor | Emotiva XPA-5 and XPA-2 | CSi A6 Center| 2 x Polk RTi A9 Front Towers| 2 x Klipsch RW-12d
Lian-LI HTPC | Panasonic Blu Ray 655k| APC AV J10BLK Conditioner |
I doubt you'll get any memory to run a full 1066 on that board. Most 780i boards I have seen top at about 1000 or so with 4 modules. It will depend on you individual memory controller.
Yes, Yellowbeard, a tall rough man with a big yellow beard
Case: PPC's Powdercoated TJ07
Mobo: EVGA 780i SLI (FTW Edition)
Cpu: E8500
Ram: Coming Soon
Sound: Asus Xonar D2
Psu: Zalman ZM 1000 Watt
Gpu: GTX 295 W/ DD-GTX 295 WB
HDD : 2x1 250 Caviar SE 16's
HDD 2: 1 TB Samsung 32 MB cache (Movies)
Water Cooling:
Pump: Laing D5 MCP 655 Rad: XSPC RX360
Cpu: Apogee GTZ Res: XSPC 250mm Passive
FWIW I ran 8gb of Mushkin at 1066+ on my Rampage board for over a year, with no problems.
http://www.xtremesystems.org/forums/...ghlight=bootsy
Sorry for the threadjack. I'm using what my sig says. Would I be able to run 8gb (4 sticks) at 1066 of 8500c5d? My MB is supposedly good at ocing ram... I've read at the corsair forum, but didn't find a thread with my MB.
Antec three hundred
i7 950 @ 4.2
Rampage Gene III
12GB Dominator (8-8-8-24 @ 1600 @ 1.64V)
Asus 6950 DCII
Corsair HX620
Intel gen 2 80GB
I know this is the corsair forum, so delete if inappropiate but the geil black dragon 8gb 1066 kit might be something for you? I got the pc6400 ( ddr2 800 ) version which will clock to about 900 without needing high volts, and this is on a p5w dh so I'd recon a newer chipset shouldn't have much problems running the higher grade kit at the 1066 you want. 4x2gb on I975 is pretty rough, it did lower max fsb on my board.
The brand of memory or memory voltage does not matter. It's the memory controller and its ability to handle 4 modules. And, the OP is asking about a 780i. I'm not saying it can't be done but, I've never many if any 780i boards go over about DDR1000 running 4 up.
Yes, Yellowbeard, a tall rough man with a big yellow beard
True, sorry should have thought about it abit longer
Hey YellowBeard, What is the general concensus about the controller on Asus' Formula II ? Thanks. I'm thinking of sticking another 4GB set of Ascent and going 64bit.
Some will, some won't. Memory controllers are like a box of chocolates........
Yes, Yellowbeard, a tall rough man with a big yellow beard
Bookmarks