Forum: Corsair Product Support Forums

I purchased a 600T white case from a computer store that was 2hrs away. The box was sealed like normal and wasn't damaged. Apparently though this was a demo model that I got took on because it's missing several things and has a different brand fan installed in the front. I went ahead and ordered...

Is this acceptable? or not? I do not have any idea where any of my purchasing paperwork is for the PSU, so an RMA may be difficult if not impossible :(. It will read 12.09 on the 12v rail in windows, but put a graphics load on it (BF3) for example, and it will drop down as low as 11.75, causing...

Dear Corsair guys, Me and my friends have been using Corsair stuff from many years now and would like to thank you'll from the bottom of our hearts for the wonderful stuff you'll provide (except for maybe the really budget/value/low end stuff, that we anyways don't prefer irrespective of...

Hello, I'm currently trying to get a stable 24/7 4.4GHz (i7 990X). I have bought last year Corsait Dominator PC16000 rated 9-10-9-27 @2000MHz I run mprime (prime95) for 24h, but always got errors related to memory... This morning, I've decided to use XMP : What a surpise : XMP set them...

Just wondering... it's been a couple of years since the recall, but once one set finally dies (8-8-8 2000MHz mnh-e) after a few years, what does corsair usually replace it with? What specific modules? IIRC corsair is suppose to replace it with something comparable or better. just curious :)

Hi guys, I got a guts feeling that IC is the exact same on: CMSO16GX3M2A1600C11, Corsair Value Select 2 x 8 GB PC12800 11-11-11-28 CMSX16GX3M2A1866C10, Corsair Vengeance 2 x 8 GB PC15000 10-11-10-30 For that reason I would like to flash my Value Select, to the faster Vengeance SPD,...

These just arrived http://www.newegg.ca/Product/Product.aspx?Item=N82E16835706018 When i get home im going to install on my h100. Question is do you think my temps will drop a little more with 2 x 190cfm fans going thew the rad ?

Do Corsair cover these for faulty design? Bought one last year and thought it was odd how the rubbery grip wobbled once plugged into a USB port, pulled it out of a USB port recently and it left the USB plug in socket and me left with the rubber handle! I can post pics if needed of the damaged...

ok i got this memory for fair price but want to know whats chips are on it, dont want to remove HS. also those ddr3 list dont have them listed cant find it on corsair site also its this one http://p.playserver1.com/ProductImages/9/5/3/5/5/2/0/2/20255359_700x700min_1.jpg TR3X6G1600C9 1.65V...

Hi, I have bought some sticks to Corsair webstore but don't want to keep it, so I wonder if it's possible to get a refund after I sent back ( non-opened, non-used ) to webstore ? Tried to use their forums, but activation bug occurs and email since 3 days with their helpdesk and no luck too...

A few days ago, my machine was sitting idling at the windows desktop while I was downstairs when I smelled a burning smell, went upstairs and found the PC off and the room full of smoke. Not a great experience, as you can imagine. The system is a 2600k on a Maximus IV Extreme with SLI 580s...

Hi all, could someone get me the SPD of these memories?, Has to be the ver.7.1, thank you very much and best regards.

I've been out the loop for some time now & I'm just wondering what happened to this. Was i scrapped? Did it get released? Or was it just a reviewers prezzie? Thanks

Running memtest86+ using CORSAIR 2GB (2 x 1GB) DDR3 1800 TWIN3X20481800C7DFIN and I got 22 errors. E6750 450x7 @ 3.1Ghz/1.35V DDR3 @ 1800/7-7-7-20/2V Up the vdimm more? I'm already at 2.0V and I flunked Super Pi 32m as well. Edit: Also, what's with the cpu being @ 3.6? Does memtest set...

I had one of my fans go out on my H80. I either want to get a replacement or two better ones. Any suggestions please. :D

Hi, I've never rma'ed corsair products before. Purchased these (2 sticks) back in 2009 directly from the e-shop and they've always been great and almost always flawless for me. Mostly used with AMD cpus countless times and haven't been freezed or overvolted excessively. However, I've used them...

I'm really happy with my high performance HX850, but it has 1 downside: It's the loudest part of my PC. I don't want to part with it, though, as it's performance is stellar. So I have a question about the fan controller inside this PSU. How is it controlled? Is it based on load or on the internal...

Hello I send this kit, CMG6GX3M3A2000C7 in RMA. For what, Corsair could replace it? Corsair suggested a kit CMT6GX3M3A1866C9 or CMT12GX3M3A2000C9. CMG6GX3M3A2000C7 are the "high end module" (was costing ~$450), it would be logical being replaced by CMGTX8, right? Or am I wrong? Thanks...

I have a 2x1GB kit of Dominator 1800C7 v3.1 (D9GTR). The one stick broke and my RMA was approved. I'd like to know if the replacement module/s I will receive from RMA will be the same revision as the ones I send in (v3.x) as I have to send both sticks in because they came in a kit and if it's not...

i really would like to get ahold of the pump/block combo from a corsair h80/h100. i do not want to waste the extra money on the radiator however. UNLESS of course corsair plans to make 140mm or bigger rads anytime soon. i really would like to see 180mm rad with the h80/h100 pump and thats...

On one of my new systems, my Corsair HX620 makes a buzzing sound when I am at desktop idle. In addition to the constant buzzing sound, when my SSD gets accessed, I hear a high pitched clicking that almost makes it sounds like my SSD is a regular HDD. Its driving me nuts. As soon as I put a load...

I have two of the above mentioned drives. One has firmware 1.3.3, but the newer one has 1.3.2. Should I even bother even upgrading the firmware? Is there a link I can find out the benefits of 1.3.3? Thanks in advance for your time.

I thought they baked their heat spreaders to the mem modules looks like cheap sticky :banana::banana::banana::banana: to me This is what happened moving the modules from slot 2 and 4 to 1 and 3