Insulating with eraser

[Solarfall]

wow OverDozeD thats a huge pot your using there
btw are you using ac5 ?? if you are i would recommend that you use ceramique its wayy better when playing with subzero temps

[OverDozeD]

Yes we're using AC5 there. I know about ceramique but that was what we had got there at the moment
Actually it was just training for future events, coz we have very poor experience of subzero OC-ing

[<<HANNIBAL>>]

Very good method for insulation
We tested it first time in Georgia on my mobo and rubber did well, but hand-made DI pot suX, only 5753Mhz on Celeron D347.
http://valid.canardpc.com/show_oc.php?id=458510

Here's the pics

hmm
hand-made? and which pot is not hand made?
I haven't heard of any pots produced by some kind of company
I agree now it sux but pot will get better after hold-down bracket and bottom replacement

[CL3P20]

I use the eraser for all my insulating needs.. GPU's..and mobo. Never used anything that works as good, and has such fast clean-up.

8800GS's prepped for DICE runs


780i prepped for DICE on CPU and SPP


GA-X48 DQ6 prepped for DICE runs


-52c temps with DICE chilled loop

[giorgos th.]

well here is my UD5 covered with rubber...
anyone experiencing constant condensation next to the first blue dimm slot?

[Bullet92]

Oh I forgot to make some pics from last session but here is two of them after ln2 action :/





That's Tekastrip

[<<HANNIBAL>>]

some more CPU+NB Insulation:

[Evil_AnAnAs]

Really nice guide.

I made my own guide about this type of insulation on a Swedish OC forum. Even though the text is Swedish there are som nice pictures there, http://sweclockers.com/forum/showthr...readid=833961/.
Just look away when you see the crappy hole in the armaflex.

[bartx]

What do you use to cleaning eraser, when remains are still between legs of IC's or smd parts? I tried acetone, but it doesn't work

[ceemic]

bartx, what kind of eraser do You use? I suggest Faber-Castell - it comes off very easy from everywhere.

[bartx]

bartx, what kind of eraser do You use? I suggest Faber-Castell - it comes off very easy from everywhere.

KOH-I NOOR
HARDMUTH 6421

If's fine, when you take off insulation after one day, but I my board was insulated for about two weeks and I guess that this is the problem

[Viss]

Just like with the old sealstring i use a bit of eraser to get the small parts of. It might depend on the brand, the one i use stays stickie forever it seems.

[anubis_is_evil]

anyone knows where to get those faber castell one and willing to ship international ?

already search in my town, too bad its not available in my country....

[The Water Dog]

Loc.o helped me with this so im using it

[DFI pit bull]

What do you use to cleaning eraser, when remains are still between legs of IC's or smd parts? I tried acetone, but it doesn't work

I use a toothpick and tweezers for the awkward places. You could also use a ball of eraser to lift of other bits. Don't use acetone.

[The Water Dog]

Tryed for det first time today
And Loc.o , it wasnt the same as the stuff you guys used but was easy to work with and worked like he..
So thanks for all help
Checked for kondens and looks clean like a babybut

[Blue Storm]

2bartx:Koh-I-Noor...czech quality

here is my insulation and next photo is from action

[Smartidiot89]

First me Dimas table with 25mm neoprene sheet for the back of board. I dont use tape/polish on back just the sheet:

Maybe abit Off-Topic but where did you find that "Board" for mounting your motherboard?

Also you did use Armaflex around the pot right? I found an old Yoga-Carpet here at home could that be used instead of Armaflex you think?

[ceemic]

Smartidiot89, You can find Dima's tables here: http://www.dimastech.it/scripts/sp.php?Id=135&lang=EN
By that carpet You mean something like that: http://www.upload.ee/image/118346/4415388.jpg ? It should work, but I don't know how the material is built. It has to be air-tight (closed-cell strucure) to use it on isolation.

[nigelke]

Thanks

i am insultating my motherboard for the first time and this helpt alot

[Sil3ntSnip3a]

I'm gunna begin my first benching session under DICE this weekend. On Thursday I'm going to go pick up my materials for the motherboard insulation. I know where to get everything but the neoprene you guys used for the socket and ontop of the kneaded eraser.

Pictures I am referring to are
here

&

here

[Dahaka]

Our insulated DFI P45 T3RS



Not the best score that nigh, but is fine....i think .

[CL3P20]

shot of my MIIF prepped for pot.. just a little bit of vaseline on the bottom of the pot insulation, makes it air tight to the shop towel. This setup has been working great for me..still revising my NB insulation though :o



and mounted..

[Sil3ntSnip3a]

I'm gunna begin my first benching session under DICE this weekend. On Thursday I'm going to go pick up my materials for the motherboard insulation. I know where to get everything but the neoprene you guys used for the socket and ontop of the kneaded eraser.

Pictures I am referring to are
here

&

here

bump

[Viss]

www.kingpincooling.com or http://www.under-the-ice.com.