Quote Originally Posted by EveryFlowerFlow View Post
I have the same board. Are you using a 920 as well? I'm currently at 4.0ghz stable. 20x200

V.High 30's/Low40's idle. mid 70's full load. I want to push for more a but I'm aiming to lower volts and temps 1st.


edit:Using the f6 bios btw.
So what are your settings that keeps you stable at that speed. Really 200Mhz is my goal. Unfortunately I cannot get anything over 180Mhz bclk and I need 1.4 volts minimum to keep it stable. Currently I am deciding to get a new MB and sell this one. I am only 5 days out of my Newegg warranty. The board works fine just doesn't OC as well as I like.

So far I have tried 185-210Mhz and failed. I tried different multipliers, and have tried every QPI/VTT voltage from 1.28-1.42. My CPU is stable at 3.8, and I have tried it without Turbo and HT. I tried LLC on and off, vcore up to 1.4v, PLL up to 1.84v, I make sure that the uncore is 2x+1 higher than my RAM. I really have tried everything short of adjusting REF voltage, and clock scews.